Professional Documents
Culture Documents
Zinfos 340 Ws Brushing and Spraying
Zinfos 340 Ws Brushing and Spraying
Zinfos 340 Ws Brushing and Spraying
ZINFOS 340 WS
Available in - brushing/roller and spraying grades
INTENDED USE
DECORATION OF BUILDINGS A solvent borne high performance anti-corrosive high
performance one coat, multi surface, self priming mid sheen topcoat (50%gloss). Two grades
are available, both have high opacity and will obliterate in ‘one coat’ in most colours: Brushing
- for application by brush or roller and Spraying - for application by airless spray.
VOC classification 2004/42/(CatA /i).
Typical uses are the internal commercial decoration of factory walls and ceilings –
covers in one coat and saves 50% in labour time when painting older property containing
a mixture of substrates, steel, old galvanised, asbestos, timber, blockwork and previously
painted surfaces.
ARTICLES INSIDE BUILDINGS - but which are out of scope of the VOC Product Directive.
Typical uses are to coat machinery, process steelwork, fixed plant, and portable equipment
with a tough ‘one coat’ polyurethane anti corrosive mid sheen finish, resistant to spillage of
most cutting oils and chemicals.
METAL FINISHING A low odour, low VOC, high flash point, medium high solids, ‘one coat
anti corrosive’ semi-gloss finish (50% gloss) available in a brushing and spraying grade.
Designed for use in poorly ventilated paint shops, or any application where odour is a
problem, often used for painting large items in an open yard.
Typical applications include portable accommodation units, containers, metal stillages,
storage tanks, waste containers, farm buildings, and original equipment.
Because of its high opacity and excellent application characteristics the ‘Brushing’ grade is
particularly recommended for use over Zinfos 630 / 490 / 250 when striping portable
accommodation units.
See also the Manor supplementary information sheet ’ Guide to the UK VOC legislation’
to understand how the VOC content of a coating determines its suitability for use in any
application.
SUITABLE SUBSTRATES Can be applied directly to many surfaces, see above, they must be dry, sound and free
from dirt, dust, rust and grease. For ferrous metal ideally blast clean, where this is not
AND PREPARATION
possible ensure the metal is adequately manually prepared. For new, unweathered
external non ferrous metals pre-treat with: Manor Wash Primer for aluminium, and alloys
and Manor 1 Pack Etch Primer CT for galvanised surfaces.
PRODUCT INFORMATION Composition Based on a blend of modified alkyd resins, pigmented with
suitably selected pigments, barrier extenders and modified
(TYPICAL FIGURES)
zinc phosphate anti corrosive pigment.
.............................................................................................................................................
Volume Solids 50%
Weight Solids 64-68%
.............................................................................................................................................
VOC content 380 -400 g/litre depending upon colour
.............................................................................................................................................
Supply viscosity 6.5-7.5 poise at 20oC
.............................................................................................................................................
Typical film thickness Airless Spray : 150 microns wet and 75 microns dry
Brush application: 90 microns wet and 40 microns dry
Coverage Theoretical coverage is 6.5 sq. metres/litre at 150 microns wet
film thickness. (10.5 sq metres/ litre at 90 microns wet film
thickness)
.............................................................................................................................................
o
APPLICATION DETAILS PREFERABLY BRING PAINT TO 15-25 C. STIR WELL BEFORE USE.
Airless/Air Assisted
The product is supplied ready for use by airless spray.
Airless Spray Typical tip size 13-15 thou. or 0.33-0.38 mm
Typical fluid pressure 200 kg/sq. metre or 2800 p.s.i.
o
May be hot sprayed @ 30 C
………………………………………………………………………………………………………
Conventional spray Thin with 10 - 15% Low Odour White Spirit… typical material
nozzle 1.8mm using an HVLP gravity feed gun.
……………………………………………………………………………………………………..
Previously
painted 50 microns 75 microns
o
Environmental The air temperature should be at least 5 C with a surface
o
Conditions temperature 3 C above dew point and the relative humidity
below 90%, thus ensuring that the surface is dry and that
condensation will not occur during application or drying. The
drying times will be significantly extended in cold, damp
conditions.
After a period of storage the product should be thoroughly stirred. Usable life 2 years
SHELF LIFE from date of manufacture in unopened containers, protected from heat and frost.
The information given in this data sheet is based on experience and is accurate to the best of our knowledge. No guarantee should be implied, however, since the conditions of
use are beyond our control. This data sheet does not constitute a specification.
In case of doubt as to the suitability of the product, please contact our Technical Service Department.