Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Chg.

Date
TECHNICAL SERVICE PARTS 05 1-16
R
06 01-16
STYLE 3481,3483
PRODUCT MANUAL STREAM MASTER II 6
18
3 3 3
1 PT 6
SEE ELEVATION GEARBOX DETAIL 34 33 32 27 30 28 29 2 31 26
8x 70 4x
PT 5
PT 7

3
49

39 PT 4

40 3
12 14 42 BALLS PT 3
41
3 4X
43 59
3 PT 2 PT 1
2.5" x 2.5" ADAPTER 14 35 BALLS
40 58
132 SECTION B-B
11 SCALE 0.250
41 55
60 13
133
3 2 11
54
46 ADJUSTABLE
1 54 54 1
134 1 ROTATION STOP LOCATIONS
10
ANGLE OF STOP LOCATIONS
DETAIL C
SCALE 0.436 ROTATION
1 55
22 23
90 (STD) 2,6 (SHOWN)
ASSEMBLY NOTES: 16 9 12
12 15 45 1,7
USE PARKER O-LUBE ON ALL O-RINGS AND 9
20 22.5 13 1,7
1
MATING SURFACES UNLESS OTHERWISE NOTED. 54
135 3,5
1 USE PERMABOND LM113 OR LOCTITE 222. 21 55
1 1 177 NO STOPS
2 USE PRIMER T AND PERMABOND HH120 OR LOCTITE 277. 17 85
48
3 55 ALL OTHER LOCATIONS 55
USE LOW-TEMP LUBRIPLATE.
45
4 DIMPLE AT ASSEMBLY.
5 THOROUGHLY COAT WITH NEVER SEEZ MARINERS CHOICE. 50
6 USE PERMABOND LH050 OR LOCTITE 592.
SEE DETAIL C 63
7 10
USE LOCTITE 290.
8 GENERAL DEPICTION SEE BILL OF MATERIAL. 47

9 ALIGN BALL IN HOLE. TIGHTEN PLUG UNTIL TOUCHES 51 1


BALL. THEN BACK OUT PLUG 1/4-1/2 TURN. 4X
42
10 ALIGN LOGO AT TOP WITH THE HANDWHEEL EXTENTION.
11 LOCATION OF PEMANENT STOP. ITEM 45 TO BE ASSEMBLED IN
FIRST GROOVE FOR ROTATION 44
53
12 THOROUGHLY CLEAN THREADS OF PLUG AND MATING PART WORM GEAR (ITEM 32) ORIENTATION
AND APPLY LOCTITE 425. 52

PHONE: 330.264.5678 or 800.228.1161 I FAX: 330.264.2944 or 800.531.7335 | www.akronbrass.com Parts List Sheet:
WARRANTY AND DISCLAIMER*: We warrant Akron Brass products for a period of five (5) years* after purchase against defects in materials or workmanship. Akron Brass will repair or replace product which fails to satisfy this warranty. Repair or replacement

124287
shall be at the discretion of Akron Brass. Products must be promptly returned to Akron Brass for warranty service. We will not be responsible for: wear and tear; any improper installation, use, maintenance or storage; negligence of the owner or user; repair or
modification after delivery; failure to follow our instructions or recommendations; or anything else beyond our control. WE MAKE NO WARRANTIES, EXPRESS OR IMPLIED, OTHER THAN THOSE INCLUDED IN THIS WARRANTY STATEMENT, AND WE
DISCLAIM ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. Further, we will not be responsible for any consequential, incidental or indirect damages (including, but not limited to, any loss of profits) from
any cause whatsoever. No person has authority to change this warranty. *Unless otherwise provided herein. Akron Brass industrial electronic components & the Severe-Duty Monitor have a one (1) year warranty. Select Akron Brass handline nozzles and valves
carry a ten (10) year warranty. Scene Star Lights carry a (6) year warranty. Weldon products have a two (2) year warranty from date of manufacture (excluding consumable components). Select Weldon LED products carry a five (5) year warranty. Honda products
have the manufacturers’ warranty and Akron Brass disclaims any warranty in respect of those products.
© 2016 Akron Brass Company. All rights reservered. No portion of this can be reproduced without the express written consent of the Akron Brass Company. D47038
Chg. Date
TECHNICAL SERVICE PARTS 05 1-16
R
06 01-16
STYLE 3481,3483
ASSEMBLY NOTES:
PRODUCT MANUAL STREAM MASTER II
USE PARKER O-LUBE ON ALL O-RINGS AND
MATING SURFACES UNLESS OTHERWISE NOTED.
1 USE PERMABOND LM113 OR LOCTITE 222.

ADJUSTABLE 2 USE PRIMER T AND PERMABOND HH120 OR LOCTITE 277.


ELEVATION STOP LOCATIONS 56 1
3 USE LOW-TEMP LUBRIPLATE.
ANGLE OF STOP LOCATIONS PT B
4 DIMPLE AT ASSEMBLY.
ELEVATION
5 THOROUGHLY COAT WITH NEVER SEEZ MARINERS CHOICE.
-45 ,+45 (STD) Z
6 USE PERMABOND LH050 OR LOCTITE 592.
-20 ,+45 B
7 USE LOCTITE 290.
-45 ,+90 NO STOPS
PT Z 8 GENERAL DEPICTION SEE BILL OF MATERIAL.
ALL OTHER LOCATIONS 57 9 ALIGN BALL IN HOLE. TIGHTEN PLUG UNTIL TOUCHES
BALL. THEN BACK OUT PLUG 1/4-1/2 TURN.
10 ALIGN LOGO AT TOP WITH THE HANDWHEEL EXTENTION.
11 LOCATION OF PEMANENT STOP.
12 THOROUGHLY CLEAN THREADS OF PLUG AND MATING PART
36
17 AND APPLY LOCTITE 425.
1 81
11 2 80 SCALE 0.250
82 39 3
83
57
56 38
1
37
7x 61
3
42
43
44
40
60 ITEM 45 TO BE ASSEMBLED IN
SECOND GROOVE FOR ELEVATION
45 3
46

62
3
41
3 53
56 47

1 48 52

50

64
10

51
1
4X

PHONE: 330.264.5678 or 800.228.1161 I FAX: 330.264.2944 or 800.531.7335 | www.akronbrass.com Parts List Sheet:
WARRANTY AND DISCLAIMER*: We warrant Akron Brass products for a period of five (5) years* after purchase against defects in materials or workmanship. Akron Brass will repair or replace product which fails to satisfy this warranty. Repair or replacement

124287
shall be at the discretion of Akron Brass. Products must be promptly returned to Akron Brass for warranty service. We will not be responsible for: wear and tear; any improper installation, use, maintenance or storage; negligence of the owner or user; repair or
modification after delivery; failure to follow our instructions or recommendations; or anything else beyond our control. WE MAKE NO WARRANTIES, EXPRESS OR IMPLIED, OTHER THAN THOSE INCLUDED IN THIS WARRANTY STATEMENT, AND WE
DISCLAIM ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. Further, we will not be responsible for any consequential, incidental or indirect damages (including, but not limited to, any loss of profits) from
any cause whatsoever. No person has authority to change this warranty. *Unless otherwise provided herein. Akron Brass industrial electronic components & the Severe-Duty Monitor have a one (1) year warranty. Select Akron Brass handline nozzles and valves
carry a ten (10) year warranty. Scene Star Lights carry a (6) year warranty. Weldon products have a two (2) year warranty from date of manufacture (excluding consumable components). Select Weldon LED products carry a five (5) year warranty. Honda products
have the manufacturers’ warranty and Akron Brass disclaims any warranty in respect of those products.
© 2016 Akron Brass Company. All rights reservered. No portion of this can be reproduced without the express written consent of the Akron Brass Company. D47038
Chg. Date
TECHNICAL SERVICE PARTS 05 1-16
R
06 01-16
STYLE 3481,3483
PRODUCT MANUAL STREAM MASTER II

QUANTITY QUANTITY QUANTITY QUANTITY


ITEM NO. DESCRIPTION PART NO. ITEM NO. DESCRIPTION PART NO.
3481 3483 3481 3483
1 3" FLANGE BASE INLET 124351 - 1 42 WOODRUFF KEY 727025 2 2
1 4" FLANGE BASE INLET 124353 1 - 43 WORM GEAR 718273 2 2
1 DN100 FLANGE BASE INLET 124356 1 - 44 WORM SHAFT 768459 2 2
2 ELBOW INLET 125792 1 1 45 RETAINING RING 758149 2 2
3 OUTLET ELBOW 2.5" NH 124138 - 1 46 SLEEVE BEARING 703995 2 2
3 OUTLET ELBOW 3.5" NH 123941 1 - 47 O-RING 2-112 757313 2 2
10 ** O-RING 3-342 757439 1 1 48 O-RING 2-036 757312 2 2
11 ** O-RING 2-241 757210 1 1 49 BRONZE BEARING 803099 1 1
12 ** O-RING 2-158 757326 1 1 50 HANDWHEEL EXTENSION 124301 2 2
13 SLIDER 125789 1 1 51 SCREW 10-24 X 1-1/4 767100 8 8
13 SLIDER ( 22.5 ONLY) 125790 1 1 52 HANDWHEEL 721523 2 2
14 * BALL BRASS 3/8" DIA. 704020 77 77 53 ROLL PIN 744060 2 2
15 SWIVEL PLUG W/HOLE 742123 2 2 54 STOP 769498 3 3
16 SWIVEL PLUG 742112 2 2 55 PLUG 744337 4 4
17 GREASE FITTING 3/16 713191 4 4 56 STOP 769843 3 3
18 PIPE PLUG 1/8 NPT 744009 1 1 57 BACK PLUG 745187 1 1
20 SENSOR POSITION PLUG 742246 1 1 58 ID PLATE STYLE 3481 745254 1 -
21 O-RING 2-120 757020 1 1 58 ID PLATE STYLE 3483 745256 - 1
22 WASHER #8 784123 2 2 59 NAIL GRIP 736052 4 4
23 SCREW 8-32 X 1/2 765155 2 2 60 SPACER 768458 2 2
26 ** BEARING 803058 1 1 61 BEARING WASHER 784113 2 2
27 ** BEARING 803057 1 1 62 THRUST BEARING 704437 1 1
28 ** O-RING 2-242 757073 1 1 63 LABEL LEFT AND RIGHT 729780 1 1
29 ** O-RING 2-246 757076 1 1 64 LABEL UP AND DOWN 729779 1 1
30 ** O-RING 2-347 757466 1 1 70 SET SCREW 5/16-18 X 1/4 765071 4 4
31 ** O-RING 2-348 757376 1 1 80 BOX ELEVATION SENSOR POTTING 803066 1 1
32 WORM GEAR 123934 1 1 81 O-RING 2-136 757083 1 1
33 SCREW 1/4-20 X 3/4 765030 8 8 82 WASHER #8 784123 4 4
34 RETAINING RING 758326 1 1 83 SCREW SOCKET HEAD 8-32 x 3/8" 765064 4 4
36 GEAR BOX 124302 1 1 85 SCREW SET 10-24 x 1/4" 765025 4 4
37 SCREW 1/4-20 X 2-1/4 765310 7 7 132 ADPT THREADED *** - 1
38 BEARING 803105 1 1 133 GASKET 717043 - 1
39 SPRING BEELVILLE 769276 2 2 134 SET SCREW 1/4-20 X 1/4 765002 - 1
40 THRUST WASHER 784121 6 6
41 NEEDLE BEARING 703453 3 3

* KIT OF 50 BALLS: 109342


** FOR ITEMS 10,11,12,26,27,28,29,30,31 ORDER REPAIR KIT 92200001
*** CONTACT AKRON BRASS CUSTOMER SERVICE FOR PROPER 2.5" THREADED ADAPTER

PHONE: 330.264.5678 or 800.228.1161 I FAX: 330.264.2944 or 800.531.7335 | www.akronbrass.com Parts List Sheet:
WARRANTY AND DISCLAIMER*: We warrant Akron Brass products for a period of five (5) years* after purchase against defects in materials or workmanship. Akron Brass will repair or replace product which fails to satisfy this warranty. Repair or replacement

124287
shall be at the discretion of Akron Brass. Products must be promptly returned to Akron Brass for warranty service. We will not be responsible for: wear and tear; any improper installation, use, maintenance or storage; negligence of the owner or user; repair or
modification after delivery; failure to follow our instructions or recommendations; or anything else beyond our control. WE MAKE NO WARRANTIES, EXPRESS OR IMPLIED, OTHER THAN THOSE INCLUDED IN THIS WARRANTY STATEMENT, AND WE
DISCLAIM ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. Further, we will not be responsible for any consequential, incidental or indirect damages (including, but not limited to, any loss of profits) from
any cause whatsoever. No person has authority to change this warranty. *Unless otherwise provided herein. Akron Brass industrial electronic components & the Severe-Duty Monitor have a one (1) year warranty. Select Akron Brass handline nozzles and valves
carry a ten (10) year warranty. Scene Star Lights carry a (6) year warranty. Weldon products have a two (2) year warranty from date of manufacture (excluding consumable components). Select Weldon LED products carry a five (5) year warranty. Honda products
have the manufacturers’ warranty and Akron Brass disclaims any warranty in respect of those products.
© 2016 Akron Brass Company. All rights reservered. No portion of this can be reproduced without the express written consent of the Akron Brass Company. D47038

You might also like