Professional Documents
Culture Documents
7.2 Crusher Erection and Maintenance Data - Flsmidth
7.2 Crusher Erection and Maintenance Data - Flsmidth
Spider Super Nut Bolts mm ft. lbs. Nm (Only applicable to super nut type Spider Nuts)
item number 01.02.03.01 Dia 24 torque 295 400
Crushing Surfaces
Replace the crushing surfaces when the product size can not be maintained, or when the usual capacity can not
be maintained, or when there is a pronounced and consistant increase in the crusher operating horsepower, or when there is
a pronounced concave area worn into the lower row of concaves, or when there is a pronounced concave area worn into the
lower mantle, or when there are cracked or split parts.
Protective Surfaces
Replace the spider arm shields, spider cap, top shell wearing plates, bottom shell outer wall liners, bottom shell rib and counter shaft
housing shields and liners when these components are about to wear through, or when there are cracked or split parts.
Eccentric inches mm
Replace the eccentric when the outer diameter of the eccentric is less than 53.676 1363.37
or when the outside diameter of the eccentric is oval to an amount greater than 0.071 1.81
as determined by measuring diameter of the eccentric at two places 90 degrees from each other and subtracting the smallest measurement from
the largest measurement
.031" [0.787mm] gasket at Bottom Plate 0.019 0.47 (with 15% compression allowance of gasket material)
.062" [1.574mm] gasket at Bottom Plate 0.037 0.95 (with 15% compression allowance of gasket material)
-9 0.074 1.88
Anti-Clockwise Rotation
-8 0.066 1.67
-7 0.058 1.46
-6 0.049 1.26
-5 0.041 1.05
-4 0.033 0.84
-3 0.025 0.63
-2 0.016 0.42
-1 0.008 0.21
Housing Arrow Vertical 0 0.000 0.00
<-------------------------
Clockwise Rotation
1 -0.008 -0.21
2 -0.016 -0.42
3 -0.025 -0.63
4 -0.033 -0.84
5 -0.041 -1.05
6 -0.049 -1.26
7 -0.058 -1.46
8 -0.066 -1.67
9 -0.074 -1.88
10 -0.082 -2.09