This document lists 28 useful commands for piping modeling in AVEVA E3D. Some key commands include CONN and CONN TO NEXT to connect piping components, REM ALL ADD CE to remove everything and add the current element, ENHANCE CE COLOUR RED to change the color of the current element to red, and BY N 1000 and DIST 1000 to move an element or specify the distance between components. The commands allow modeling and connecting piping components as well as querying their descriptions, materials, and references.
This document lists 28 useful commands for piping modeling in AVEVA E3D. Some key commands include CONN and CONN TO NEXT to connect piping components, REM ALL ADD CE to remove everything and add the current element, ENHANCE CE COLOUR RED to change the color of the current element to red, and BY N 1000 and DIST 1000 to move an element or specify the distance between components. The commands allow modeling and connecting piping components as well as querying their descriptions, materials, and references.
This document lists 28 useful commands for piping modeling in AVEVA E3D. Some key commands include CONN and CONN TO NEXT to connect piping components, REM ALL ADD CE to remove everything and add the current element, ENHANCE CE COLOUR RED to change the color of the current element to red, and BY N 1000 and DIST 1000 to move an element or specify the distance between components. The commands allow modeling and connecting piping components as well as querying their descriptions, materials, and references.
NO. COMMAND EXPLAIN 01 AXES AT CE 02 AXES OFF 03 REM ALL ADD CE REMOVE EVERYTHING ADD CURRENT ELEMENT FROM 3D VIEW 04 ADD ALL EQUIP WITHIN VOL CE 100 ADD ALL EQUIPMENT WITHIN VOLUME CURRENT ELEMENT 100 05 ENHANCE CE COLOUR RED CHANGE COLOR CURRENT ELEMENT TO RED 06 CONN CONNECT PIPING COMPONENT TO PREVIOUS 07 CONN TO NEXT CONNECT PIPING COMPONENT TO NEXT 08 FCONN FORCE CONNECT PIPING COMPONENT TO PREVIOUS 09 FCONN TO NEXT FORCE CONNECT PIPING COMPONENT TO NEXT 10 CONN PH TO FIRST MEM CONNECT BRAN HEAD TO FIRST MEMBER 11 CONN PT TO LAST MEM CONNECT BRAN TAIL TO LAST MEMBER 12 UNNAME UNNAME ELEMENT 13 BY N 1000 MOVE ELEMENT ALONG NORTH DIRECTION 1000 14 DIST 1000 GIVING THE DISTANCE BETWEEN TWO COMPONENT CENTERS 1000 15 DRAG BY E 1000 MOVE THE COMPONENT AND TOWARD BY EAST 1000 16 NEW ELBOW CHOOSE ALL CREATE NEW ELBOW 17 THRO CE THROUGH CURRENT ELEMENT 18 FLIP CE FLIP CURRENT ELEMENT 19 BACK BACKWARD 20 FORW FORWARD 21 DIR D DIRECTION OF COMPONENT TOWARDS DOWN (FOR ELBOW) 22 ORI AND P3 IS UP ORIENT P3 OF COMPONENT TO UP (FOR TEE, OLET…) 23 Q DTXR QUERY DESCRIPTION OF PIPING COMPONENT 24 Q MTXX QUERY MATERIAL OF PIPING COMPONENT 25 Q DETREF DISPLAY THE DETREF REFERENCE AT COMPONENT LEVEL 26 Q CATREF DISPLAY THE CATALOGUE REFERENCE AT COMPONENT LEVEL 27 Q SPREF DISPLAY THE SPEC REFERENCE AT COMPONENT LEVEL 28 Q BLTREF OF SPREF DISPLAY THE BOLT REFERENCE AT COMPONENT LEVEL