Professional Documents
Culture Documents
2954 3850 00 - TWIN-AIR Yellow Alert - EN
2954 3850 00 - TWIN-AIR Yellow Alert - EN
1 February 2009 Yellow Alert Information on yellow alert option (platform shutdown) added
2954 3850 00
THIS PAGE IS INTENTIONALLY LEFT BLANK.
2954 3850 00
Instruction
Technical manual
information
Technical information
TwinAir™
Technical information
2954 3850 00
Technical information
Table of contents
TABLE OF CONTENTS
U.0 Unit general C.0 Compressor general C.5 Compressor control module (CCM)
U.001 Liability C.001 Compressor main components C.510 Inputs
U.002 General safety precautions C.511 Digital inputs
C.1 Air system
U.003 Tool applications safety C.512 Analogue voltage inputs
C.101 Overview
U.004 Safety during transport and installation C.513 Temperature sensor inputs
C.110 Air Receiver / Oil separator
U.005 Markings and information labels C.514 Battery voltage
C.120 Minimum pressure valve (MPV)
U.006 Transport C.520 Outputs
C.130 Compressor separating flange
U.010 Technical specifications C.521 Digital high outputs
C.140 Sensors
U.011 External view C.522 Digital low outputs
U.012 Unit dimensions C.2 Oil system C.530 Communication
U.013 Compressor data plate C.201 Overview
C.6 Sensors
U.014 CSC data plate
C.601 Overview sensors
U.015 DNV data plate
C.3 Regulating system C.610 Pressure sensors
U.016 Compressor/engine specifications
C.301 Overview C.620 Level sensors
U.017 Limitations
C.310 Unloader C.630 Temperature sensors
U.018 Settings of shutdown switches and safety
valves E.0 Engine general
C.4 Electric system
U.019 Torque values
C.401 Overview E.7 Fuel system
U.030 Safety devices
U.031 Standard safety devices E.701 Overview
U.032 Optional safety devices
U.033 Platform shutdown (yellow alert)
U.040 Drains
U.050 Options
2954 3850 00
Technical information
U.031 STANDARD SAFETY DEVICES Oil pressure and coolant temperature Inlet shutdown valve (standard on
sensors offshore units)
Safety valves The engine is equipped with low oil pressure The inlet shut down provides protection to the
On top of the air receivers a safety valve and high coolant temperature shutdown diesel engine against over speeding caused
(ASME/CE) is installed. This valve will open sensors. by failure of the engine regulator, burning oil
when the pressure exceeds the set valve. from the engine sump due to overfilling or
When a malfunction should occur this valve Latches aspiration of combustible fumes in hazardous
avoids that the pressure will rise above the At all doors latches are installed to lock the environments. The inlet shutdown is fully
design pressure of the system. doors on the “open” position. electronic.
2954 3850 00
Technical information
2954 3850 00
Technical information
U.040 DRAINS
2954 3850 00
Instruction manual
Appendix
Appendix
TwinAir™
Appendix
2954 3850 00
Appendix
Table of contents
TABLE OF CONTENTS
Circuit diagram - 9822 0963 31 (see A3 drawing)
2954 3850 00
Appendix
Wiring diagram platform shutdown (yellow alert)
2954 3850 00
Appendix
Wiring diagram platform shutdown (yellow alert)
2954 3850 00