Professional Documents
Culture Documents
Complies With EN62019 and IEC60947-5-1
Complies With EN62019 and IEC60947-5-1
Complies With EN62019 and IEC60947-5-1
All auxiliaries are common to indicator that indicates the Use of MZ203 - MZ209 on
both single and multi-pole circuit automatic/remote tripping of the RCCBs requires the use of
breakers. device. interface auxiliary CZ001.
These auxiliaries are itted to the
left hand side of devices. Connection capacity Complies with EN62019 and
6 mm2 rigid cables IEC60947-5-1.
Shunt trips, and under-voltage 4 mm2 lexible cables
releases are itted with a lag
Protection Devices
24V - 48V AC 1 MZ204
12V - 48V DC
48V DC 1 MZ205
MZ203
230V AC 1 MZ206
230V AC 1 MZ212
MZN175
4.21
Auxiliaries
for MCBs & RCCBs
Functions MZ203 Shunt Trip*
Tripping and indication auxiliary contacts are common to the range of Allows tripping of the device by feeding the coil. The contacts also
multi-pole 10kA MCBs, and RCCBs. They should be mounted on the allow for remote indication of operation.
left hand side of the device.
MZ206 Under Voltage Release*
Auxiliary Contact MZ201 Allows the MCB to trip when the voltage drops or by pressing a
Allows remote indication of the status of the device contacts to which remote off switch (ie emergency stop).
it is associated.
* Indication that the product has tripped due to the voltage release is
Auxiliary Contact and Alarm Contact MZ202 provided by a lag on the product.
This accessory has two separate functions.
Like the MZ201 auxiliary contact, however the alarm contact will
provide indication if the breaker trips under fault conditions.
Ph Ph
N N
4.22