Professional Documents
Culture Documents
FEM CIE 3 Set 2
FEM CIE 3 Set 2
A1 = 650 mm2
A2 = 325 mm2
15 5 3
3
r = 7860 Kg/m
3. Determine all natural frequencies & mode shapes of the simply supported beam
shown in Fig. Both ends of the beam are pinned. Consider one element for idealization.
Take E for copper as 121 Gpa and density of copper as 8960 kg/m3.
15 4 4
4. Heat is generated in a large plate (k=0.8 W/m -°C) at the rate of 4000 W/m3. The plate
is 25 cm thick. The outside surfaces of the plate are exposed to ambient air at 30°C
10 3 4
with a convective heat-transfer coefficient of 20 W/m2-°C. Determine the temperature
distribution in the wall which is as shown in fig.
SET 2
10 4 4
5. Find the temperature distribution and heat transfer through an iron fin of thickness 5
mm, length 50 mm and width 1000 mm. The heat transfer coefficient around the fin is
10 W/m2-K and ambient temperature is 280C. The base of the fin is at 1080C. Take
K=50 W/m-K. Use two elements.
10 2 4
5 mm
50 mm 1000 mm
***********