Professional Documents
Culture Documents
Certificate: Junction Box
Certificate: Junction Box
Junction box
Type designation: BBV35489, BBV35509, BBV53881, BBV35491, BBV35508, BBV35500,
BBV35513, BBV53888
Certificate holder: Schneider Electric Industries SAS
35 rue Joseph Monier
92500 Rueil-Malmaison
FRANCE
The product complies with EN 60670-1:2005+A1:2013
the standard(s):
Date of expiry: 30 March, 2026
Certification Body: Intertek Semko AB, Product Certification Place: Kista - Stockholm
Leif Mattsson
This Certificate is for the exclusive use of Intertek's client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and
conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this
Certificate. Only the Client is authorized to permit copying or distribution of this Certificate and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or
advertisement of the tested material, product or service must first be approved in writing by Intertek.
Technical Data:
Type designation BBV35489, BBV35509, BBV53881, BBV35491, BBV35508, BBV35500,
BBV35513, BBV53888
Rated voltage (V) 250/440V~
IP-Class IP20 / IP21
Trademark
Test Report 2023065STO-001
Product information Surface mounted boxes with Exxact design.
Can be mounted over flush mounted box with cc60 (SS 430017).
With cable anchorage for Ø6-13 mm and 20 mm conduits.
For accessories with rating 16A, 250V~ or 440V~when installing certified
floating terminals.
Can be provided with dividing wall to separate 250/440V from 12/24V.
IP20 / IP21 with inserts and frame, cable from backside, floor or side
(break out hole).
With three colours: White, metallic and anthracite.
Accessories:
strain relief: WDE002930
dividing wall: WDE002932
This Certificate is for the exclusive use of Intertek's client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and
conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this
Certificate. Only the Client is authorized to permit copying or distribution of this Certificate and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or
advertisement of the tested material, product or service must first be approved in writing by Intertek.
According to the principle of presumption of conformity, this certificate, which includes production control,
constitutes support for an EC Declaration of Conformity and CE marking according to the Low Voltage Directive
2014/35/EU.
This presumption can expire before end of validity of this certificate due to new issued Standard or Amendment
and changes within the EU legislation.
Certification Body: Intertek Semko AB, Product Certification Place: Kista - Stockholm
Leif Mattsson
This Certificate is for the exclusive use of Intertek's client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and
conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this
Certificate. Only the Client is authorized to permit copying or distribution of this Certificate and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or
advertisement of the tested material, product or service must first be approved in writing by Intertek.