ATEX PQAN For IRwin and Extrima

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

[1]

PRODUCTION QUALITY
ASSURANCE NOTIFICATION
Equipment or Protective Systems or Components
[2] Intended for use in Potentially Explosive Atmospheres
Directive 2014/34/EU

[3] Certificate Number: SP07ATEX4125


[4] List of products (equipment, protective systems or components) covered by this notification
(certificate):
Gas detection and measurement equipment Intrinsic safety (ia)
(Handheld gas detectors)
Product certificates: Sira 07ATEX2117X issue 0, 1, 3, 4 and 5
Baseefa16ATEX0034X issue 0, 1 and 2
[5] Manufacturer (applicant): INFICON AB, Box 76, SE-581 02 Linköping, Sweden
[6] Manufacturing location: INFICON AB, Westmansgatan 47F, SE-582 16 Linköping, Sweden
Supplier subject to audit: Hanza KA Åtvidaberg AB, Örsätterfabriken,
SE-597 91 Åtvidaberg, Sweden
[7] RISE, Notified Body No. 0402 for Annex IV in accordance with Article 21 of the Council Directive
2014/34/EU of 26 February 2014 notifies to the applicant that the manufacturer has a production
quality system which complies with Annex IV of the Directive. This quality system in compliance with
Annex IV of the Directive also meets the requirements of Annex VII, CONFORMITY TO TYPE BASED
ON PRODUCT QUALITY ASSURANCE.
[8] This notification is based on audit report no.9P06835:C issued 2 December 2019.
This notification can be withdrawn if the manufacturer no longer satisfies the requirements of
Annex IV. Results of periodical re-assessment of the quality system are a part of this notification
[9] This notification is valid until: 10 December 2022
and can be withdrawn if the manufacturer does not satisfy the production quality assurance
surveillance.
[10] According to Article 16 (3) of the Directive 2014/34/EU, the CE mark shall be followed by the
identification number 0402 identifying the notified body (RISE) involved in the production control
stage.

The Directive 2014/34/EU is implemented in Swedish Law by the national regulations


ELSÄK-FS 2016:2 and AFS 2016:4.

Borås 2 December 2019


RISE Research Institutes of Sweden AB
Certification - Notified Body No. 0402

Dag Sjöholm Peter Bremer


Certification Manager Certification Officer

Certificate No. SP07ATEX4125 | 2019-12-02


RISE Research Institutes of Sweden AB | Certification
Box 857, SE-501 15 Borås, Sweden
Phone: +46 10-516 50 00 Accred. no. 1002

certifiering@ri.se| www.ri.se
Certification of
Products
ISO/IEC 17065
2017-08-24 9P06835
This document may not be reproduced other than in full, except with the prior written approval by RISE Certification. Page 1 (1)

You might also like