Professional Documents
Culture Documents
KDC-X889 KDC-MP828 KDC-MP7028 KDC-MP728 KDC-X789 KDC-MP628: Instruction Manual
KDC-X889 KDC-MP828 KDC-MP7028 KDC-MP728 KDC-X789 KDC-MP628: Instruction Manual
KDC-X889
KDC-MP828
KDC-MP7028
KDC-MP728
KDC-X789
KDC-MP628
INSTRUCTION MANUAL
US Residence Only
Register Online
Register your Kenwood product at
www.kenwoodusa.com
© B64-2962-20/02 (KW)
2 | English
English | 3
4 | English
• If you experience problems during installation, Before using this unit for the first time
consult your Kenwood dealer. This unit is initially set on the Demonstration mode.
• If the unit fails to operate properly, press the Reset When using this unit for the first time, cancel the
button. The unit returns to factory settings when <Demonstration mode Setting> (page 50).
the Reset button is pressed.
• Press the reset button if the disc auto changer fails About ODD (Offset Dual Differential) D/A
to operate correctly. Normal operation should be
System (KDC-X889/KDC-MP828)
restored.
The high quality sound play is to be done by ODD
D/A System. Dual D/A converters are built-in the
ODD D/A System, and the digital processing is
isolated and controlled separately for front channel
so the channel separation is improved sharply.
Also, it produces the data in which the sound data
Reset button is offset on the minus side and converts the two
signals (original and offset data) to the analog
signal, which has less noise and distortion, by the
synthetic process.
However, ODD D/A System has no effect during the
following conditions.
- When "2 ZONE" of <Audio Setup> (page 13) is
Reset button "ON".
• We recommend the use of <Security Code> - When <Bypass Control> (page 17) is "Bypass".
(page 42) to prevent theft.
• The characters which can be displayed by ISO
8859-1.
• The illustrations of the display and the panel
appearing in this manual are examples used to
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on
the display on the actual equipment, and some
of the illustrations on the display may represent
something impossible in actual operation.
English | 5
CD accessories
Don’t use disc type accessories.
CD cleaning
Clean from the center of the disc and move
outward.
English | 7
Multi-function Key System serves to control various Real operational example of the Multi-
functions with the [1] — [6] buttons. function Key System
The basic operation of the Multi-function Key Example: Turning ON/OFF the Random Play during
System is described below. CD play.
1. Show the function display of the Random Play.
What’s the Multi-function Key System? If "RDM" is not shown in the display, press the
This unit is equipped with the Multi-function Key [NEXT] button to switch the sections until the
System that enables the operation of multiple "RDM" function display is shown above the [3]
functions with one button. button.
For example, you can enter the Display Control 2. Turn ON/OFF the Random Play.
Mode or turn ON/OFF the Random Play by pressing Press the [3] button.
the [3] button during CD play. Each time the [3] button under the "RDM"
function display is pressed the Random Play is
Setting each function
turned ON/OFF.
The function display will show the controllable
function of the [1] — [6] button above the button. Example: KDC-X889/MP828
Pressing the [1] — [6] button below the desired
function enables the setting of the function. S.F.C S.M.S EQ WOW On Off DISP
English | 9
ATT ANG
Control knob
VOL
ATT ANG
Control knob
VOL
Power Volume
Turning ON the Power Increasing Volume
Press the [SRC] button. Turn the [VOL] knob clockwise.
Turning OFF the Power Decreasing Volume
Press the [SRC] button for at least 1 second. Turn the [VOL] knob counterclockwise.
10 | English
English | 11
Function of the KDC-X889/KDC-MP828 3 Select the Audio Setup item for adjustment
Audio Control Press the [VOL] knob.
Each time the knob is pressed, the items that can
1 Select the source for adjustment be adjusted switch as shown below.
Press the [SRC] button. 4 Setup the Audio item
2 Enter Audio Control mode Turn the [VOL] knob.
Press the [VOL] knob. Adjustment Item Display Range
3 Select the Audio item for adjustment Front High Pass Filter*2 "HPF-F Fc"
Press the [VOL] knob. (KDC-MP728/MP628) Through/80/100/120/150
/180 Hz
Each time the knob is pressed, the items that can (KDC-MP7028/X789) Through/40/60/80/100/120/
be adjusted switch as shown below. 150/180/220 Hz
4 Adjust the Audio item Rear High Pass Filter*2 "HPF-R Fc"
Turn the [VOL] knob. (KDC-MP728/MP628) Through/80/100/120/150/
180 Hz
Adjustment Item Display Range (KDC-MP7028/X789) Through/40/60/80/100/120/
Rear Volume *1 "Rear Volume" 0 — 35 150/180/220 Hz
Subwoofer level*2,3 "Sub-WLevel" –15 — +15 Low Pass Filter*1,2 "LPF-SW"
Balance "Balance" Left 15 — Right 15 (KDC-MP728/MP628) 60/80/120/Through Hz
(KDC-MP7028/X789) 50/60/80/100/120/
Fader*3 "Fader" Rear 15 — Front 15
Through Hz
Exit Audio Control mode
Subwoofer Phase*1,2 "SW Phase" Reverse (180°)/ Normal (0°)
Volume offset "Vol-Offset" –8 — 0
Loudness "LOUD" OFF/ON
• *1 You can control this item when "2 ZONE" of <Audio
Setup> (page 13) is set to "ON".
Dual Zone System "2 ZONE" OFF/ON
• *2 You can control this item when <Subwoofer
Output> (page 14) is set to "SW ON".
• *2 You can control this item when Speaker Select • Volume offset: Each source’s volume can be set as a
Subwoofer of <Sound Management system> (page difference from the basic volume.
15) is set to any item other than "None". • Loudness: Compensating for low and high tones
• *3 You can control this item when "2 ZONE" of <Audio during low volume.
Setup> (page 13) is set to "OFF". • *1You can control this item when <Switching preout>
(page 43) is set to "SWPRE Sub-W". (KDC-MP728/
5 Exit Audio Control mode MP628 only)
Press any button. • *1 You can control this item when <Subwoofer
Press the button which is not [VOL] knob and Output> (page 14) is set to "SW ON".
[ATT]/[ANG] button. • *2 You can control this item when "2 ZONE" of <Audio
Setup> is set to "OFF".
• Dual Zone System
Main source and sub source (Auxiliary input) output
Front channel and Rear channel separately.
Function of the KDC-MP7028/KDC-MP728/KDC- - The channel of sub source is set up by <Dual Zone
X789/KDC-MP628 System Setting> (page 45).
Audio Setup - Main source is selected by [SRC] button.
- The volume of Front channel is adjusted by [VOL]
Setting the Sound system, such as Cross over
knob.
Network. - The volume of Rear channel is adjusted by <Audio
Control> (page 10).
1 Select the source for adjustment - The Audio Control has no effect on sub source.
Press the [SRC] button. • The Dual Zone System can be used with the Auxiliary
2 Enter Audio Setup mode input sources shown below.
Press the [VOL] knob for at least 1 second. - Internal auxiliary input
5 Exit Audio Setup mode
12 | English Press [VOL] knob for at least 1 second.
English | 13
14 | English
English | 15
Equalizer Control
1 Select the source for adjustment
• User memory:
Press the [SRC] button.
The values set on the <Audio Control> (page 10/12).
2 Select the key function section • Each setting value is changed with the <Speaker
Press the [NEXT] button. Setting> (KDC-MP7028/MP728/X789/MP628) (page
Repeatedly press the button until "EQ"/"SYS.Q" 13) / <Sound Management system> (KDC-X889/
is displayed above the [3] (KDC-X889/MP828)/[1] MP828) (page 15).
First, select the speaker type with the Speaker setting.
(KDC-MP7028/MP728/X789/MP628) button.
Refer to <Notes on Multi-function Key System> Equalizer Front Setting/
(page 9). Equalizer Rear Setting (KDC-X889/MP828
only)
3 Enter Equalizer Control mode
1 Select a frequency band you wish to adjust
Press the [3] ("EQ")/[1] ("SYS.Q") button.
Press the [2] ("F") or [3] ("R") button.
Each time the button is pressed, it switches
• When "2 ZONE" of <Audio Setup> (page 13) is ON, between "Band 1" and "Band 4".
you cannnot select "EQ". (KDC-X889/MP828 only) 2 Select the adjustment items for Equalizer.
4 Select the Equalizer Control item for Push the Control knob to [FM] or [AM].
adjustment Each time the button is pressed, the items that
Press the [1] — [3]/[5] button. can be adjusted switch as shown below.
3 Adjust the Equalizer.
Multi-function key operation Equalizer Control Item Push the Control knob to [4] or [¢].
[1] "SYS.Q" System Q Setting Each time the knob is pushed, the setting
[2] "F"* Equalizer Front Setting switches as shown below.
[3] "R"* Equalizer Rear Setting
[5] "Preset"* [1] "CALL" Call mode Equarizer adjustment item Range
[2] "MEM" Memory mode Equalizer Front Frequency/ Refer to the followings.
Equalizer Rear Frequency
Equalizer Front Level/ –9 — +9
• * Function of the KDC-X889/MP828 Equalizer Rear Level
• "Preset": You can store an adjusted equalizer control Equalizer Front Quality/ 0.25/ 0.50/ 1.00/ 2.00
value by selecting "MEM". Refer to <Memory Equalizer Rear Quality
mode> (page 18). Also, you can recall it by
selecting "CALL". Refer to <Memory Recall
mode> (page 18).
• The frequency which can be selected by each
5 Adjust the Equalizer control item Frequency band is shown below.
System Q Setting (Sound Type) Band Frequency
Push the Control knob to [4] or [¢]. Band1 60/ 80/ 100/ 120/ 160/ 200 (Hz)
Each time the knob is pushed, the setting Band2 250/ 315/ 400/ 500/ 630/ 800 (Hz)/ 1 (kHz)
switches as shown below. Band3 1.25/ 1.6/ 2/ 2.5/ 3.15/ 4 (kHz)
KDC-X889/MP828 KDC-MP7028/ Band4 5/ 6.3/ 8/ 10/ 12.5/ 16 (kHz)
MP728/X789/MP628
Sound setting Display Sound setting Display
User memory "USER" User memory "USER" • To get the best sound, first set the Cabin Setting
Natural "NATURAL" Rock "ROCK" and Speaker Select Front/Rear parameters using the
Rock "ROCK" Pops "POPS" <Sound Management system> (page 15).
Pops "POPS" Easy "EASY" 6 Exit Equalizer Control mode
Easy "EASY" Top 40 "TOP 40" (KDC-X889/MP828 only)
Top 40 "TOP 40" Jazz "JAZZ" Press the [6] ("RTN") button.
Jazz "JAZZ" Natural "NATURAL"
16 | English
4 Select the WOW Control item for adjustment 1 Select the source for adjustment
Press the [1] — [5] button. Press the [SRC] button.
Multi-function keyoperation WOW Control Item 2 Select the key function section
[1] "EFFECT" Effect Press the [NEXT] button.
[2] "FOCUS" FOCUS Repeatedly press the button until "On Off" is
[3] "TB_F" TruBass Front displayed above the [5] button.
[4] "TB_R" TruBass Rear Refer to <Notes on Multi-function Key System>
[5] "SRS 3D" SRS 3D (page 9).
English | 17
18 | English
English | 19
20 | English
English | 21
22 | English
English | 23
The text display in the Upper text display In Auxiliary input source
part
Information Display
In Tuner source Auxiliary input name "AUX Name"/"AUX EXT"
Spectrum Analyzer & Clock "Speana/Clock"
Information Display
Date "Date"
Station name, Program Service "BAND+ch+SNPS"
name*1 or Frequency In HD Radio source
Radio text, Program Service name or "Radio Text"
Frequency (FM)*1 Information Display
Frequency (FM,AM) "BAND+ch+FREQ" Station name "Station Name"*2
Spectrum Analyzer & Clock "Speana/Clock" Title "Title"*2
Date "Date" Frequency "Frequency"
Spectrum Analyzer & Clock "Speana/Clock"
In CD & External disc source Date "Date"
24 | English
Standby source
Information Display
Clock "Clock"
Date "Date"
Blank "Blank"
In Auxiliary input
Information Display
Spectrum Analyzer & Clock "Speana/Clock"
Date "Date"
Blank "Blank"
In HD Radio source
Information Display
Spectrum Analyzer & Clock "Speana/Clock"
Date "Date"
Blank "Blank"
Title "Title"*
English | 25
The text display in the Lower text display part In SIRIUS tuner source
In Tuner source Information Display
Information Display Indicator "Indicator"
Indicator "Indicator" Spectrum Analyzer & Clock "Speana/Clock"
Spectrum Analyzer & Clock "Speana/Clock" Date "Date"
Date "Date" Blank "Blank"
Blank "Blank" Channel Name "Channel Name"
Radio text (FM)(KDC-X889/MP828/X789 only) "Radio Text"* Song Title "Song Title"
Artist Name "Artist Name"
In CD & External disc source Composer name "Composer Name"
Information Display Category Name "Category Name"
Indicator "Indicator" Label "Label Name"
Spectrum Analyzer & Clock "Speana/Clock" Comment "Comment"
Date "Date"
Blank "Blank"
Disc title "Disc Title"* • * If the contents of the information cannot be
Track title "Track Title"* displayed, indicator displayed. However, In HD Radio
Disc name "DNPS" source, a display become a blank display.
• G-Graphic display
Displays the condition of G on horizontal direction
Function of the KDC-X889/KDC-MP828/KDC- (e.g; when turning the curve) by the graphic.
MP7028/KDC-MP728/KDC-X789 Display Type E • G-Meter display (Graphic)
G-Analyzer display Switching Displays the maximum value of acceleration G, right
direction G, and left direction G by the numerical
Switches G-Analyzer display when the Display value.
type is set to "Display Type E". (G: gravity) • G-Meter display (Text)
The maximum value of acceleration G, right direction
G, and left direction G is displayed by the numerical
• Before switching G-Analyzer display, <G-Counter Level value. The value of G is only the reference so it is
set> (page 44) and <G-Analyzer Calibration set> (page differed from the actual value.
44) are required to be setup. • G-Counter display
Adds the point of the acceleration level. The point
1 Select the key function section is determined after a lapse of 1 hr drive or at power
Press the [NEXT] button. off (ex; ACC Off ), and then it will be displayed by the
Repeatedly press the button until "DISP" is graph. Furthermore, it displays the average of the past
displayed above the [6] (KDC-X889/MP828)/[2] data by the line. (The scale of graph is determined
(KDC-MP7028/MP728/X789) button. along with the largest point among the past 10 data.)
Refer to <Notes on Multi-function Key System> • The value of G-Meter display and G-Counter display
(page 9). can be reset by <G-Analyzer Reset> (page 44).
English | 27
Control knob
Control knob
ST indicator
English | 29
Control knob
AUTO 1–6
Control knob
AUTO 1–6
Band display Program Service name
Radio text
30 | English
English | 31
Control knob
Control knob
IN indicator
32 | English
2 Do Track/File Search
Press the [4] or [¢] button.
Canceling Direct Track/File Search
Fast Forwarding and Reversing
Press the [38] button.
Fast Forwarding
Hold down on [¢] of the Control knob.
Release your finger to play the disc at that point.
Function of disc changers with remote
Reversing
Hold down on [4] of the Control knob. Direct Disc Search
Release your finger to play the disc at that point. Doing Disc Search by entering the disc number.
Track/File Search
Searching for a song on the disc or in the Audio
file folder.
Push the Control knob to [4] or [¢].
English | 33
1 Select the key function section 1 Select the key function section
Press the [NEXT] button. Press the [NEXT] button.
Repeatedly press the button until "REP" is Repeatedly press the button until "RDM" is
displayed above the [4] button. displayed above the [3] button.
Refer to <Notes on Multi-function Key System> Refer to <Notes on Multi-function Key System>
(page 9). (page 9).
2 Turn ON/OFF the Repeat Play 2 Turn ON/OFF the Random Play
Press the [4] ("REP") button. Press the [3] ("RDM") button.
Each time the button is pressed, the Repeat Play Each time the button is pressed, Random Play
switches as shown below. turns ON and OFF.
When it’s ON, "Random ON" is displayed.
In CD & External disc source
Repeat play Display
• When the Control knob is pushed to [¢], the next
Track Repeat "Repeat ON"
random song starts.
(In Disc Changer) ("Track Repeat ON")
Disc Repeat (In Disc Changer) "Disc Repeat ON"
OFF "Repeat OFF"
34 | English
English | 35
36 | English
Control knob
Control knob
English | 37
English | 39
Control knob
MENU SRC
Control knob
NEXT SRC
Tuning
• When you connect an HD Radio, Tuner features of Selecting the station.
the unit are disabled and switched to HD Radio tuner
features. A portion of the setting methods including 1 Select HD Radio source
the Tuning Mode will change. Press the [SRC] button.
• With the HD Radio tuner, you can use the similar Select the "HD Radio" display.
functions to <Station Preset Memory>, <Auto
Memory Entry>, and <Preset Tuning> of Tuner 2 Select the HD FM band
features. Refer to Tuner features for how to use the Push the Control knob to [FM].
functions. Each time the knob is pushed to [FM], it switches
between the HF1, HF2, and HF3 bands.
Select the HD AM band
Push the Control knob to [AM].
3 Tune up or down band
Push the Control knob to [4] or [¢].
40 | English
Control knob
MENU
Control knob
MENU
Menu display
In Standby mode Press the Reset button and when it’s removed
Security Code from the battery power source
42 | English
Synchronizing the RDS station time data and this Display Setting
unit’s clock. "SWPRE : Rear" Rear preout.
"SWPRE : Sub-W" Subwoofer preout.
Display Setting
"SYNC : OFF" Adjust the time manually.
"SYNC : ON" Synchronizes the time.
English | 43
1 Select G-Analyzer Reset mode • If you fail to complete the calibraton, "No Calibration"
Push the Control knob to [FM] or [AM]. is displayed. In such a case, repeats step 1 thru 6.
Select the "G-Reset" display. 6 Exit G-Analyzer Calibration set mode
2 Enter G-Analyzer Reset mode Press the [MENU] button.
Press the Control knob for at least 1 second.
3 Select the Reset item
Push the Control knob to [FM] or [AM].
"G-Meter Reset": Reset the value of G-Meter.
Function of the KDC-X889/KDC-MP828/KDC-
"G-Counter Reset": Reset the value of G-Counter. MP7028/KDC-MP728/KDC-X789
4 Reset the value G-Analyzer Stop Watch
Press the Control knob for at least 2 seconds.
The control of stop watch can be started by G-
"Reset OK" is displayed.
Analyzer function.
5 Exit G-Analyzer Reset mode
Press the [MENU] button.
44 | English
English | 45
In HD Radio mode
Receive mode Setting
Sets the receive mode.
Function of the KDC-X889/KDC-MP828/KDC-X789
Traffic Information 1 Select the Receive mode
Push the Control knob to [FM] or [AM].
Switching to traffic information automatically
Select the "Receive Mode" display.
when a traffic bulletin starts even when you aren’t
listening to the radio. 2 Enter Receive mode
Press the Control knob for at least 1 second.
Display Setting
"TI : OFF" The Traffic Information function is OFF. 3 Set the Receive mode
"TI : ON" The Traffic Information function is ON. Push the Control knob to [FM] or [AM].
Each time the knob is pushed, the Receive mode
When a traffic bulletin starts, "Traffic INFO" is switches as shown below.
displayed it and it switches to traffic information.
Receive mode Display Operation
Auto mode "Auto" Analog broadcasts and digital
• During reception of an AM station when the Traffic broadcasts will be switched
Information function is turned ON, it switches to an automatically.
FM station. When both are being transmitted,
• During reception of traffic information the adjusted the digital broadcast will have
volume is automatically remembered, and the next priority.
time it switches to traffic information it’s automatically Digital "Digital" Digital broadcasts only.
the remembered volume. Analog "Analog" Analog broadcasts only.
46 | English
English | 47
Canceling Downloading
Press the [MENU] button.
Function of the KDC-X889/KDC-MP828/KDC-X789 8 Exit the downloading mode
In Standby mode Press the [MENU] button.
Picture downloading
Downloading movies and wallpapers. • Do not operate this unit, while "Downloading" is
Downloaded pictures can be used for the display displayed, to prevent data from being damaged.
of this unit. • The number of files that can be downloaded.
- Downloaded movie: 1 file
1 Inset a CD-R/CD-RW. - Wallpaper: 1 file
Insert a CD-R/CD-RW containing files to be • When a new movie is downloaded, it is overwritten to
downloaded into this unit. the currently downloaded movie.
Refer to <Playing CD & Audio file> (page 32) for Also, when a new wallpaper is downloaded, it is
overwritten to the currently downloaded wallpaper.
details.
There is no way to delete the downloaded pictures.
Our URL http://www.kenwood.net-disp.com
• The downloaded pictures can be used for display.
describes how to make CD-R/CD-RW. <Graphic part/ Spectrum Analyzer Display Switching>
2 Enter Standby (page 20)
Press the [SRC] button. <Wallpaper selecting> (page 21)
• When you can’t download the pictures to this unit,
Select the "STANDBY" display.
there may be a problem with the CD-R/CD-RW write
3 Enter Menu mode method.
Press the [MENU] button for at least 1 second. Refer to the URL http://www.kenwood.net-disp.com,
"Menu" is displayed. and rewrite the CD-R/CD-RW.
48 | English
1 Select the unique ID display mode • Register 1 pair of Audio Preset Memory. You can't
register by the source.
Push the Control knob to [FM] or [AM].
• When you press the Reset, all the sources will be the
Select the "ACD Unique ID" display.
setting value which is registered.
2 Display the unique ID • The following items can't be registered.
Push the Control knob to [4] or [¢]. Volume, Balance, Fader, Loudness, Volume offset, Dual
Zone System, Rear Volume
English | 49
Recalling the sound setup registered by <Audio 1 Select the Demonstration mode
Preset Memory> (page 49). Push the Control knob to [FM] or [AM].
Select the "DEMO Mode" display.
1 Select the source
Press the [SRC] button. 2 Set the Demonstration mode
Press the Control knob for at least 2 seconds.
2 Enter Menu mode Each time the knob is pressed at least 2 seconds,
Press the [MENU] button for at least 1 second. the Demonstration mode switches as shown
"Menu" is displayed. below.
3 Select Audio Preset mode Display Setting
Push the Control knob to [FM] or [AM]. "DEMO Mode : ON" The Demonstration mode function is ON.
Select the "Audio Preset" display. "DEMO Mode : OFF" Exit Demonstration mode (Normal mode).
4 Enter Audio Preset mode
Press the Control knob for at least 1 second.
5 Select the Audio Preset Call
Push the Contol knob to [FM] or [AM].
Select the "Call" display.
6 Call up the Audio Preset
Press the Control knob for at least 2 seconds.
The "Call" display blinks 1 time.
7 Exit Menu mode
Press the [MENU] button.
50 | English
SRC
VOL SRC
ATT
ATT
VOL
AUD AUD 38
38
FM+
4 ¢
4/¢
FM/AM/+/– AM–
DIRECT
2-ZONE /OK
DIRECT
2-ZONE ABC DEF
[0] — [9]
PRS TUV WXY
QZ
R.VOL
English | 51
[2-ZONE] button
Each time the button is pressed, "2 ZONE" of
<Audio Setup> (page 12/13) is turned ON and In Disc source
OFF.
[5]/ [∞] buttons [4]/ [¢] buttons
Adjusts the volume of the rear channel. Doing track/file forward and backward.
It activates while the Dual Zone System is ON. [+]/ [–] buttons
Doing disc/folder forward and backward.
[38] button
Each time the button is pressed, the song pauses
and plays.
[0] — [9] buttons
When in <Direct Track/File Search> (page 33) and
<Direct Disc Search> (page 33), enter the track/
file/disc number.
52 | English
In HD Radio source
[FM] button
Select the HD FM band.
Each time the [FM] button is pressed, it switches
between the HF1, HF2, and HF3 bands.
[AM] button
Select the HD AM band.
[4]/ [¢] buttons
Tune up or down band.
[0] — [9] buttons
Press buttons [1] — [6] to recall preset stations.
English | 53
Accessories 2WARNING
If you connect the ignition wire (red) and the battery wire
(yellow) to the car chassis (ground), you may cause a short
1 circuit, that in turn may start a fire. Always connect those
wires to the power source running through the fuse box.
..........1
• If the power is not turned ON (or it is ON, but will be OFF
immediately), the speaker wire may have a short-circuit
2 or touched the chasis of the vehicle and the protection
function may have been activated. Therefore, the speaker
wire should be checked.
..........2 • If your car’s ignition does not have an ACC position,
connect the ignition wires to a power source that can be
turned on and off with the ignition key. If you connect
3 the ignition wire to a power source with a constant
voltage supply, as with battery wires, the battery may die.
• If the console has a lid, make sure to install the unit so
..........4 that the faceplate will not hit the lid when closing and
opening.
• If the fuse blows, first make sure the wires aren’t touching
4 to cause a short circuit, then replace the old fuse with
one with the same rating.
• Insulate unconnected wires with vinyl tape or other
..........4 similar material. To prevent a short circuit, do not remove
the caps on the ends of the unconnected wires or the
terminals.
5 • Connect the speaker wires correctly to the terminals to
which they correspond. The unit may be damaged or fail
to work if you share the - wires or ground them to any
..........1 metal part in the car.
• When only two speakers are being connected to the
system, connect the connectors either to both the front
output terminals or to both the rear output terminals
Installation Procedure (do not mix front and rear). For example, if you connect
the + connector of the left speaker to a front output
1. To prevent a short circuit, remove the key from
terminal, do not connect the - connector to a rear
the ignition and disconnect the - battery.
output terminal.
2. Make the proper input and output wire • After the unit is installed, check whether the brake lamps,
connections for each unit. blinkers, wipers, etc. on the car are working properly.
3. Connect the speaker wires of the wiring harness. • Mount the unit so that the mounting angle is 30° or less.
4. Connect the wiring harness wires in the
following order: ground, battery, ignition.
5. Connect the wiring harness connector to the
unit.
6. Install the unit in your car.
7. Reconnect the - battery.
8. Press the reset button.
54 | English
If no connections are made, do not let the wire come out from the tab.
Wiring harness
When using the optional power amplifier, connect (Accessory1)
to its power control terminal. P.CONT Power control wire (Blue/White)
Depending on what antenna you are using, connect
either to the control terminal of the motor antenna, ANT.
or to the power terminal for the booster amplifier of CONT Motor antenna control wire
the film-type antenna. (Blue)
Connect to the terminal that is grounded when
either the telephone rings or during conversation.
MUTE TEL mute wire (Brown)
Gray/Black
To front right
speaker Gray FRONT • R
Green/Black
To rear left
speaker Green REAR • L
Purple/Black
To rear right
speaker Purple REAR • R
Ignition key
switch
ACC
T N
T/N
N T
56 | English
Bottom panel
2
Accessory5
3
• Never insert the screw in any other screw hole than the
one specified. If you screw them in another hole, it will
contact and may cause damage to the mechanical parts
inside the unit.
English | 57
Accessory2
Removal tool
2 When the upper level is removed, remove the
lower two locations.
Accessory2
Removal tool
4 Lower the removal tool toward the bottom, and
pull out the unit halfway while pressing towards
the inside.
58 | English
What might seem to be a malfunction in your unit ? Even if Loudness is turned ON, high-pitched tone
may just be the result of slight misoperation or isn’t compensated for.
miswiring. Before calling service, first check the ✔ Tuner source is selected.
☞ High-pitched tone isn’t compensated for when
following table for possible problems. in Tuner source.
English | 59
60 | English
English | 61
62 | English
English | 63