Professional Documents
Culture Documents
Installing The Fingerprint Reader For The B-Series Touchcomputer
Installing The Fingerprint Reader For The B-Series Touchcomputer
Installing The Fingerprint Reader For The B-Series Touchcomputer
B-Series Touchcomputer
Caution:
The touch computer must be unplugged before any installation occurs.
Included Items:
• One Elo Fingerprint Reader Revision A
• Two mounting screws P/N E047270
1 5 Press a small screwdriver into
the cover between the two
Turn off the touch computer. notches. As the cover bends up,
grasp the end and peel it away.
2 6
Plug the cable into the
Choose a location to attach the
connector on the touch
fingerprint reader.
computer.
3 7
Remove the two accessory Insert the hooks on the device
covers over the chosen into the corresponding slots on
mounting location. the touch computer.
4 8
Secure the device to the touch-
To remove a cover, locate the
computer using the included
two small cuts on the cover.
screws.