Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

THE EMSEAL CHECKLIST

A SIKA COMPANY

Name_____________________________ Company____________________________________ Date________________


Phone______________________ Fax______________________ Email_________________________________________
Job Name_____________________________________ Job Location (City & State) _______________________________

INSTALLATION LOCATION CONSTRUCTION TYPE FIRE RATING

Interior Wall Above Grade New Construction No Fire Rating


Exterior Floor/Deck Below Grade Retrofit Construction Fire Rating: 1-hr 2-hr 3-hr
Roof 2
Submerged 3
1 4 5

EXPANSION GAP INFORMATION


Joint Gap Width(s): ___________________________ Joint Substrate Depth: Total Footage (ft or m):
Varies from: ___________ to ___________ (over its length) ____________________ ____________________
6 7 8

Have Gap Dimensions Been Field Measured? Yes / No Substrate Composition: ____________________________
(e.g., concrete, brick, metal, etc.)
Substrate Surface Temp. _______ Ambient Temp. _______
Membrane Tie-in?: Yes / No Type______________
9 Metal Pour Stops?: Yes / No 10

Movement (if known): Joint is: Primary Seal Joint Will Seal Out: Rain/Water Cold/Heat
_______________________ Secondary Seal Sound Air Vermin Other _________________
(e.g., ± thermal; ± shear, etc.)
11 12 13

Are There Transitions? Yes (explain) / No How Does the Joint Terminate?
_______________________________________________ _____________________________________________
14 15

FOR HORIZONTAL DECK/FLOOR and ROOF JOINTS (ONLY)


DECK CONSTRUCTION
Is this a Solid Slab
Condition?
Yes / No
Is this a Split Slab
Condition?
Yes / No
Topping slab thickness: _________
Does the Joint
have Blockouts?
16
Yes / No
Please fill in the slab width dimemsions at each "x" . If one substrate of your joint is
Traffic Types (check all that apply):
a wall instead of a slab, please denote that "x" as "Wall" instead of giving a dimen-
Car Bus Pedestrian None sion. If more than one joint occurs within the same immediate area, please draw
them and the appropraite dimensions. Attach additional drawings as needed.
Other ______________________
17
Please include any relevant details when submitting checklist to EMSEAL

Architect: _________________ Engineer: _________________ Contractor: ________________ Owner/Developer: _________________

Please FAX or Email to EMSEAL Fax: (508) 836-0281 / Email: techinfo@emseal.com / Phone: (508) 836-0280
EMSEAL CHECKLIST V8.0w Copyright © 2020 by EMSEAL Joint Systems, Ltd. All rights reserved.

You might also like