A P PL ICA TI ON 14 152 045 48 PUNCH Disassembly of the 1 Special tools for HL 300 rock drills are designed for bearing of the shank bushing and assembly dismounting and assembly of HL 300 rock drills. of the shank bushing 15 150 385 48 PUNCH Assembly and disas- sembly of the bearings D E SCR I PTI ON of the chuck and the shank bushing The design of the tools aims at correct dismount and 16 090 300 38 GAUGE HP-ACCUMULATOR 1 assembly of parts. The complete set of special tools 17 090 845 48 GAUGE LP-ACCUMULATOR 1 18 093 333 78 TOOL SET INCL. torque wrench, 1 involves all the needed tools for rock drill rebuild. With sockets 19, 22, 24, 30, the special tools the rock drill maintenance can be 36, hammer, wrench 19, 24, 27, 30, 41, torque made effectively and safely wrench head 19 19 150 419 18 punch Disassembly of the 1 shank bushing and COMPON ENTS assembly of the bearing, Ref Part No. Description Standard designation Qty disassembly and as- 1 152 032 58 PUNCH NEEDLE BEARING OF 1 sembly of the front THE GEAR HOUSING bearing 2 152 031 28 PUNCH NEEDLE BEARING OF 1 20 872 524 59 30 mm DETACHABLE 1 THE GEAR HOUSING TORQUE WRENCH 3 150 383 98 PUNCH REAR BEARING OF 1 HEAD FOR TIE RODS THE GEAR HOUSING 21 869 598 69 PRESSURE FOR PARTS 16, 17 2 4 150 384 18 PUNCH FRONT BEARING OF 1 SEAL (ELBOW FITTING) THE GEAR HOUSING 22 150 551 68 PUNCH FRONT NEEDLE 1 5 151 998 08 EXTENSION FOR PUNCHES 1 BEARING OUT ROD 23 152 280 08 HOSE ASSY 1 6 151 999 38 PUNCH FRONT BEARING OF 1 FOR FILLING THE GEAR HOUSING DEVICE 7 151 806 48 OPENER ACCUM. BOTTOM 1 PARTS TO BE ORDERED SEPARATELY 8 095 170 98 STAND ACCUM. COVER 1 24 154 830 38 STAND ASSY 1 10 153 936 18 FILLING FOR ACCUMULATOR, 1 25 154 825 68 FITTING 1 DEVICE INCL. PART 23 PLATE 11 833 710 99 PICK SET SEALS 1 12 098 067 72 STAND 1
Sandvik Mining and Construction reserves the right to change this specification without further notice.