Professional Documents
Culture Documents
2 ODX302015 CX600-X Series Products Hardware Introduction ISSUE 1
2 ODX302015 CX600-X Series Products Hardware Introduction ISSUE 1
Products Hardware
Introduction
www.huawei.com
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page1
Objectives
Upon completion of this course, you will be able to:
Describe CX600-X hardware system architecture
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page2
Contents
1. CX600-X16/X8/X3 Hardware Introduction
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page3
Contents
1. CX600-X16/X8/X3 Hardware Introduction
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page4
Contents
1. CX600-X16/X8/X3 Hardware Introduction
1.1 CX600-X16 Chassis
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page5
Overview-Appearance of CX600-X16
① Switching capacity: 12.58T(bidirectional)
Interface capacity:3.2T (bidirectional)
⑥
MPU 1 : 1 redundancy
②
⑦ SFU 3+1 redundancy
④ FAN2+2 redundancy
A Power Entry Modules (PEMs)
③
No. Module Quantity
⑨ ⑧ ⑧
⑤ ① Air intake vent ×2
② MPU ×2
③ SFU ×4
④ ⑦ ④ LPU × 16
⑤ Cabling trough ×2
⑥ Fan module ×4
① ⑥
⑦ Filtering box ×4
⑧ DC power module ×8
⑨ CMU ×1
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page6
Overview-Distributed Architecture
1 2 3 17 18 4 5 6 7
L L L M M L L L L
P P P P P P P P P
U U U U U U U U U
SFU 19
SFU 20
SFU 21
SFU 22
L L L L L L L L L
P P P P P P P P P
U U U U U U U U U
8 9 10 11 12 13 14 15 16
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page7
Power Supply System
The CX600-X16 supports either DC or AC
power supply.
In the case of a DC power supply system, eight 70 A
Power Entry Modules (PEMs) are inserted at the rear
of the chassis, working in 4+4 load balancing mode.
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page8
Power Supply System-DC Power Supply
System
Indicator Color Description
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page9
Power Supply System-Architecture of DC
Power Supply System
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page10
Power Supply System-AC Power Supply
System
Front view of the AC rectifier module: Rear view of the AC rectifier module
DCa1
area1
MPU1
MPU0
LPU1
LPU1
LPU3
LPU1
LPU0
LPU2
LPU1
DCb1
DCa2
DCa area2
DCb2 SFU 0
SFU 1
SFU 2
DCa3 SFU 3
area3
DCb3
LPU13
LPU12
LPU14
LPU15
LPU11
LPU10
LPU7
LPU8
LPU9
DCb DCa4
area4
DCb4
board
Filter box
Area 4 Area 3
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page12
Heat Dissipation System-Fan
Rear CX600-X16 Air Flow Map
Fan modules locate at the rear of the chassis, and the exhaust design is evenly
Fan 2+2 redundancy
“ U” shape air-flow channel, helpful for evenly Heat Dissipation, avoiding dead angle
X16: the air channels for upper and lower frames are independent and dissipate heat separately.
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page13
Heat Dissipation System- Air Filter
Air filter :
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page14
Switching Network
LED Indictor
RUN Before the registration of the SFU: If the indicator blinks twice every second (2 Hz), the
system is in the alarm state.
After the registration of the SFU: If the indicator blinks once every two seconds (0.5 Hz),
the system is running normally.
ACT If the indicator is on, it indicates that the SFU is working normally; if the green indicator
is off, it indicates that the SFU is faulty.
OFL When the SFU is working normally, the OFL indicator is off. After the OFL button is
pressed to power off the SFU, the OFL indicator is on.
Switching Network Appearance
The CX600-X16 has 4 SFUs. These 4 SFUs work in 3+1 load balancing mode. The
4 SFUs load balance services at the same time. When one SFU is faulty or being
replaced, the other 3 SFUs automatically take over its tasks to ensure normal
delivery of services, thus improving system reliability.
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page16
Control Plane
The control plane of the CX600-X16 is separated from the data plane and the
monitoring plane.
Main processing module, clock module and LAN Switch all use 1:1 hot
redundancy
The two MPUs work in 1:1 backup mode. Each MPU monitors the status of the
other. If the master SRU is faulty, the slave MPU automatically takes over as the
master MPU.
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page17
Contents
1. CX600-X16/X8/X3 Hardware Introduction
1.1 CX600-X16 Chassis
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page18
Overview-Appearance of CX600-X8
Switching capacity: 7.08T(bidirectional)
Interface capacity:1.6T (bidirectional)
② ②
⑥ ⑥ No. Module Quantity
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page19
Overview-Slot Layout
1 2 3 4 9 11 10 5 6 7 8
L L L L S S S L L L L
P P P P R F R P P P P
U U U U U U U U U U U
1 2 3 4 9 11 10 5 6 7 8
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page20
Power Supply System
The CX600-X8 supports either DC or AC
power supply.
In the case of a DC power supply system, four 70 A
Power Entry Modules (PEMs) are inserted at the
rear of the chassis, working in 2+2 load balancing
mode.
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page22
Power Supply System-Architecture of DC
Power Supply System
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page23
Power Supply System-AC Power Supply
System
Front view of the AC rectifier module Rear view of the AC rectifier module
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page25
Heat Dissipation System-Fan
Rear CX600-X8 Air Flow Map
Fan modules locate at the rear of the chassis, and the exhaust design is evenly
Fan 1+1 redundancy
“ U” shape air-flow
flow channel, helpful for evenly Heat Dissipation, avoiding dead angle.
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page26
Heat Dissipation System-Air Filter
Air Filter:
Note:
Placing a black sponge air filter at the air intake vent helps to prevent dust from
entering the system. It is recommended that air filters be removed and cleaned
at least once every three months.
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page27
SFU
LED Description
RUN Before the registration of the SFU: If the indicator blinks twice every
second (2 Hz), the system is in the alarm state.
After the registration of the SFU: If the indicator blinks once every two
seconds (0.5 Hz), the system is running normally.
ACT If the indicator is on, it indicates that the SFU is working normally; if the
green indicator is off, it indicates that the SFU is faulty.
OFL When the SFU is working normally, the OFL indicator is off. After the
OFL button is pressed to power off the SFU, the OFL indicator is on.
Switching Network Appearance
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page29
Control Plane
The control plane of the CX600 is separated from the data plane and the
monitoring plane. The SRU is used by the CX600-X8.
The two SRUs work in 1:1 backup mode. Each SRU monitors the status
of the other. If the master SRU is faulty, the slave SRU automatically
takes over as the master SRU.
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page30
Contents
1. CX600-X16/X8/X3 Hardware Introduction
1.1 CX600-X16 Chassis
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page31
Overview-Appearance
Appearance of the CX600-X3 DC chassis
MPU 1:1redundency
Appearance of the CX600-X3 AC chassis
Fan 1+1 redundancy
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page32
Overview-Slot Layout
4 MPU MPU 5
LPU 3
LPU 2
LPU 1
Slot layout
Slot Number Quantity Slot Width Remarks
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page33
Power Supply System
The CX600-X3 supports either DC or AC
power supply.
Note:
The PEM of the CX600-X3 is 1 U.
The indicator of DC power supply module in CX600-X3 is located at the
panel of the power module.
The power supply module in CX600-X3 has one input and following
functions:
Surge protection, filtering, and short circuit protection
Alarm
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page35
Power Supply System-AC Power Supply
System
Note:
The PEM of the CX600-X3 is 1 U.
The AC power supply module has various protection functions,
including:
Outgoing overvoltage protection
Outgoing overvoltage protection
Short circuit
Alarm
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page36
Heat Dissipation System -Fan
Air flow in the CX600-X3 DC chassis(DC) The CX600-X3 draws in air from the left
and exhausts air from the rear. The air
intake vent is located at the left side of
the chassis and the air exhaust vent is
located at the rear of the chassis.
An air filter
Note:
The air filter of the CX600-X3 is located on the left rear of the
chassis .
The air filter of the CX600-X3 can be bent, which facilitates the
maintenance within a limited space in the rear of the chassis.
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page38
Contents
1. CX600-X16/X8/X3 Hardware Introduction
1.1 CX600-X16 Chassis
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page39
CX600-X16/X8/X3 Boards
CX600-X16/X8/X3 support boards:
LPU
LPUF-40,2 Sub-slots
LPUI-40
LPUI-41
LPUS-41
LPUS-20
LPUF-21,2 Sub-slots
LPUF-10,4 Sub-slots
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page40
Service Process Unit- Versatile Service
Process Unit C
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page41
Service Process Unit- Flexible Card Versatile
Service Unit 10(VSUF-10)
The VSUF-10 is of a multi-core processing architecture and has a high-
performance multi-core processing engine and a large memory. The
board provides flexible and complicated service processing capabilities
and ensures bandwidth for the user traffic with a large throughput.
Software features
FCC
RET
MDI
Hardware features
Supporting hot swap
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page42
Service Process Unit- Integrated Versatile
Service Unit 20 A(VSUI-20-A)
The VSUI-20-A, also known as the CR5DVSUI201A, provides the
following functions: :
Encrypts user data to ensure data secrecy.
Checks data completeness to ensure that the data is not modified when being transmitted.
Supports negotiations of security algorithms and keys between devices and provides a
secure mechanism for online key generation.
Supports two security modes, that is, transport mode and tunnel mode, to meet
requirements of different network structures.
Flexible Card Line Processing Unit(LPUF-100)
The LPUF-100 provides four slots .An FPIC supports the following
functions:
Hot swap
FRR
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page44
LPUF-100 Supporting Subcards
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page45
Flexible Card Line Processing Unit(LPUI-
100)(1/2)
10-Port10GBase LAN/WAN-XFP supports1588v2
Software features
IPv4 and IPv6 address
ICMP
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page46
Flexible Card Line Processing Unit(LPUI-
100)(2/2)
16-Port10GBase LAN-SFP + Flexible Card Line Processing Unit
(LPUI-100)
Function
IEEE 802.3ae
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page47
Flexible Card Line Processing Unit(LPUF-
40)
The Flexible Card Line Processing Unit LPUF-40 provides two slots, each
of which can hold an FPIC that supports hot swapping. The cards support
hot swap. The LPUF-40 supports a maximum of 40-Gbit/s bandwidth.
Software features
LPUF-40-A supports all software features
Hardware features
LPUF-40 supports hot swap.
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page48
LPUF-40 Supporting Subcards(1/2)
20-Port100/1000Base-X-SFP
20-Port 100/1000Base-X-SFP Flexible Card Flexible Card A(supports1588v2)
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page49
LPUF-40 Supporting Subcards(2/2)
2-Port 10GBase LAN/WAN-XFP Flexible Card B 4-Port 10GBase LAN/WAN-XFP Flexible Card
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page50
Integrated Line Processing Unit (LPUI-40)(1/2)
Function
IEEE 802.3ae
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page51
Integrated Line Processing Unit (LPUI-40)(2/2)
Function
IEEE 802.3ab
IEEE 802.3z
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page52
Integrated Line Processing Unit(LPUI-41)(1/3)
Integrated Line Processing Unit (LPUI-41) function feature:
IPv4 and IPv6 address distribution
ICMP
L3 Route Protocol(BGPv4、OSPFv2、OSPFv3、IS-IS )
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page53
Integrated Line Processing Unit(LPUI-41)(2/3)
48-Port100/1000Base-X-SFP
Integrated Line Processing Unit
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page54
Integrated Line Processing Unit(LPUI-41)(3/3)
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page55
Line Processing Unit S(LPUS-41)
48-Port100/1000Base-X-SFP
Line Processing Unit S(LPUS-41)
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page56
Line Processing Unit S(LPUS-20)
40-Port100/1000Base-SFP
Line Processing Unit S(LPUS-20)
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page57
Flexible Card Line Processing Unit(LPUF-21)
The LPUF-21 provides two slots, each of which can hold one half-
width FPIC.
Software features
LPUF-21-A supports all software features
Hardware features
LPUF-21 supports Hot swap
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page58
Flexible Card Line Processing Unit(LPUF-10)
Software features
NSF
FRR
Self-Test Question About CX600-
X16/X8/X3 Hardware
1. In the CX600-X16/X8/X3 routers, the dynamic routing
protocol is processed by the ( )
A. Clock board
B. Control plane
D. Flexible card
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page60
Content
1. CX600-X16/X8/X3 Hardware Introduction
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page61
Content
2. CX600-X2/X1 Hardware Introduction
2.1 CX600-X2/X1 Chassis
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page62
Overview-CX600-X2 System Structure
The CX600-X2 provides two slots for NPUs and eight slots for
PICs. The network process unit on the CX600-X2 is NPUI-20. All
the PICs perform data switching through the NPUI-20. The NPUI-
20 has a bidirectional processing capability of up to 20Gbit/s. The
maximum interface capacity of the CX600-X2 is 75.2Gbit/s.
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page63
Overview-CX600-X1 System Structure
The CX600-X1 provides one slot for the NPU and four slots for
PICs. The network process unit on the CX600-X1 is NPUI-20. All
the PICs switch data with each other through the NPUI-20. The
NPUI-20 has a bidirectional data processing capability of up to
20Gbit/s. The maximum interface capacity of the CX600-X1 is
52Gbit/s.
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page64
Overview-Slot Layout
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page65
Power Supply System
DC Power Supply System is powered by two PSUs, which work in
1+1 backup mode. work in 1+1 backup mode.
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page66
Heat Dissipation System
The CX600-X8 draws in air from the left and exhausts air
from the right.
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page67
Data Plane Architecture of the CX600-X1
NPUs are key parts on the CX600-
X2/X1 and are responsible for data
processing and data switching
between PICs (Physical Interface
Card) and NPUs(Network
Processing Unit) .
NPUI-20 panel
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page70
Control Plane
The function of control plane is implemented by the MPU.
MPU can be equipped with a single MPU or double MPUs (in backup
mode).
In the case of double MPUs, the master MPU works and the slave MPU is
in the standby state.
MPUG panel
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page71
Content
2. CX600-X2/X1 Hardware Introduction
2.1 CX600-X2/X1 Chassis
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page72
CX600-X2/X1 Board(1/4)
CX600-X2/X1 supporting boards:
8-Port 100/1000Base-X-SFP (HIC)
8-Port 100/1000Base-X-SFP (HIC, supports 1588v2)
8-Port 100Base-X-SFP(FIC, supports 1588v2)
8-Port 100Base-RJ45(FIC, supports 1588v2)
16-Port E1(75ohm)(FIC)
16-Port E1(120ohm)(FIC)
Auxiliary Interface and 4-Port 100Base-RJ45 (FIC,
supports1588v2)
1-Port Channelized OC-3c/STM-1c POS-SFP (FIC)
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page73
CX600-X2/X1 Board(2/4)
8-Port100/1000Base-X-SFP (HIC)
8-Port100/1000Base-X-SFP (HIC,supports1588v2)
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page74
CX600-X2/X1 Board(3/4)
8-Port100Base-X-SFP (FIC,supports1588v2)
8-Port100Base-RJ45 (FIC,supports1588v2)
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page75
CX600-X2/X1 Board(4/4)
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page76
Self-Test Question About CX600-X2/X1
Hardware
1. The dynamic routing protocol is processed by the ( )
A. Clock board
B. PIC
C. NPU
D. MPU
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page77
Summary
CX600-X16/X8/X3 Hardware
CX600-X16/X8/X3 Chassis
CX600-X16/X8/X3 Board
CX600-X2/X1 Hardware
CX600-X2/X1 Chassis
CX600-X2/X1 Board
Copyright © 2011 Huawei Technologies Co., Ltd. All rights reserved. Page78
Thank you
www.huawei.com