Professional Documents
Culture Documents
Apex Floor Guard
Apex Floor Guard
Apex Floor Guard
PRODUCT BENEFITS
Vibrant Finish Excellent Adhesion
Better Sheen provides beauty to the concrete It provides an excellent adhesion to concrete WATER BASED
floors substrate
High Abrasion Resistance 2 Years Performance Warranty
Better abrasion resistance provides low wear and Apex Floor Guard offers a comprehensive 2
tear of the film years performance warranty for film integrity on * All Asian Paints products contain no added
Lead, Mercury, Arsenic or Chromium
from April 2008.
PRODUCT FEATURES
WASHABILITY COLOURS AVAILABLE COVERAGE
44*
BEST IN CLASS On smooth masonry surface by brushing
HIGH
MEDIUM 1 COAT*
30 - 50sq.ft/ltr
LOW
6-8
0
MATT LOW SHEEN RICH SHEEN HIGH GLOSS
45 15
SMOOTH
1 ltr 4 ltr 20 ltr 30 HOURS
Shelf life: 5 years from date of manufacture in original tightly Refer to sheen levels in technical details
closed containers away from direct sunlight and excessive heat.
HOW TO APPLY
PRE PAINTING STEPS PAINT APPLICATION PROCESS
SURFACE PREPARATION: SUBSTRATES: CEMENT BLOCKS | CEMENT TILES | CONCRETE FLOORS | STAMPED CONCRETE FLOORS
Ensure that the surface to
be painted is free from any APPLICATION CODE THINNER DILUTION % APPLICATION RECOATING
VISCOSITY1 PERIOD
damp, loose paint, dust, wax or
grease and other contaminants. STEP 1
Remove all contaminants such APEX FLOOR GUARD
FRESH PAINTING/REPAINTING
as dirt, grease, oil, dust etc. with
soap powder solution using a
scrubbing brush. Apply TruCare 5443 WATER 10 - 20% BRUSH 30 - 40 4 - 6 HRS
Bioblock on algae or fungus
affected area after cleaning. Dry
for minimum of 4 - 6 hours before
painting. Moisture content in the
surface should be less than 10%. STEP 2
APEX FLOOR GUARD
FRESH PAINTING SURFACE FRESH PAINTING/REPAINTING
1. As measured through a Ford cup FC B4. 2. Recoat period is quoted for 25°C and 50% Relative Humidity, these may vary under
different conditions. * Mineral Turpentine Oil
Finishes for Exterior Floors
ADDITIONAL INFORMATION
Allow atleast 24 hours of curing before foot > During Surface preparation, any previous growth of fungus, algae or moss need to be
traffic begins and regular traffic can begin removed thoroughly by vigorous wire brushing and apply TruCare Bioblock on algae or fungus
only after 72 hours of curing. For the best affected area after cleaning
performance, ensure proper washing and > Do not apply the paint under conditions of frost, dew, rain, fog or adverse weather (below
cleaning of the painted surface at regular 10°C or above 45°C surface temperature).
intervals. Do not wash the surface with wire > Flaky, Powdery substrate should not be paints directly.
brush. > Do not apply on Bituminous/Asphalt substrate.
Version No. VN27/05/2019. Please note that this datasheet supersedes all previous versions
For Feedback/complaints, write to Marketing Manager Services, Asian Paints Limited, 6A, Shantinagar, Santacruz (E), Mumbai 400 055, India