Professional Documents
Culture Documents
Vibratory Controls: Operation and Maintenance Manual
Vibratory Controls: Operation and Maintenance Manual
Página 1 de 3
Shutdown SIS
Previous Screen
i01954552
Vibratory Controls
SMCS - 1408
Illustration 1 g00933414
The switch on the top of the propel control lever controls the operation of the vibration system.
ON - In order to turn on the vibration system, press the switch on the top of the propel control lever.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw... 04/07/2006
CS-683E Vibratory Compactor DAD00001-UP (MACHINE) POWERED BY 3056E E... Página 2 de 3
OFF - In order to stop the vibration system, press the switch again on the top of the propel control lever.
Note: In order to start the vibratory system, the engine must be running at high idle.
Note: In order to start the vibratory system, the vibratory amplitude control must be set to high
amplitude or low amplitude. The amplitude must be set before the vibratory system can be started with
the vibratory control.
Illustration 2 g00934349
The vibratory amplitude control is located on the operator console to the right of the seat. The control is
used to select one of three settings: low amplitude, high amplitude and off
OFF - To stop the vibration system, push the vibratory control to the CENTER position.
Note: When the switch for the vibratory amplitude control is moved into the OFF position, the on/off
control button will be disabled.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw... 04/07/2006
CS-683E Vibratory Compactor DAD00001-UP (MACHINE) POWERED BY 3056E E... Página 3 de 3
Illustration 3 g00933432
The variable vibration control knob is used to vary the frequency of the drum vibration. Rotate the knob
in a clockwise direction in order to increase the drum vibration. Rotate the knob in a counterclockwise
direction in order to reduce the frequency of the drum vibration. The drum vibration can be varied from
1450 to 1850 vibrations per minute (VPM).
Note: Do not operate the machine below 1450 (VPM). Damage to the machine may occur.
Copyright 1993 - 2006 Caterpillar Inc. Tue Jul 4 10:38:51 EST 2006
All Rights Reserved.
Private Network For SIS Licensees.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw... 04/07/2006