Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 3

Form n° WI-LST-HSE-003

CHECK LIST PRIOR HEAVY LIFT OPERATIONS Rev: 00 Data: 18/01/2021


mechanical Pag.: 1/1

DATA: VESSEL: Sheet n°


DLB MIC 30
Mechanical Equipment Y/N Comments

General Condition
DC MOTOR No 1 - SWING
Check the gearbox oil level
Check and inspect DC motor brake assy.

DC MOTOR No 2 - SWING
Check the gearbox oil level
Check and inspect DC motor brake assy.

BOOM ENGINE
Check Oil level
Check water level
Check starting Air pressure and motor

HOIST ENGINE
Check Oil level
Check water level
Check starting Air pressure and motor

MAIN DRUM
Check the clutch
Check the driving chain
Check the drum brake
Check the air chamber control
Check the air solenoid
Check wire condition
Check Block condition
Check load indicator pressure is good

AUX DRUM
Check the clutch
Check the driving chain
Check the drum brake
Check the air chamber control
Check the air solenoid
Check wire condition
Check Block condition
Check load indicator pressure is good

WHIP DRUM
Check the clutch
Check the driving chain
Check the drum brake
Check the air chamber control
Check the air solenoid
Check wire condition
Check Block condition
Check load indicator pressure is good
BOOM DRUM
Check the clutch
Check the driving chain
Check the drum brake
Check the air chamber control
Check the air solenoid
Check wire condition

CONTROL AIR COMPRESSOR


Confirm that compressor is on line in auto mode and
make sure it has a pressure of 7 bar
Drain water from the air bottle

AIR TAGGER
Confirm that compressor is on line in auto mode and
make sure it has a pressure of 7 bar
Drain water from the air bottle

HORN
Check Air pressure is present

Check pneumatic system valve and piping condition

Noise and vibration levels on pumps and motor


generator

Pneumatic System leakage, drain receivers of moisture

Check for unusual noise

General condition of structure, cabin and Machinery area

Check adequate lubrification of open gears

Defect Reported/Additional comment

Ch. Mechanic Signature


Please Report any defect or damage to the Chief Engineer

You might also like