Professional Documents
Culture Documents
LaserTrackerAccessories List 2017
LaserTrackerAccessories List 2017
All of our products and accessories offer the same premium quality
and practical design you would expect from a Swiss made product.
Sincerely,
Your Products Team
576908 Leica Absolute Scanner LAS-20-8 - MCA62, Scanner Sensor Cable, 10 m (576911)
AT403
The LAS-20-8 flying-dot Scanner system consists of: AT930 - Power Supply Unit (576873)
- L AS-20-8 Absolute Scanner (576908),
AT960 opt. - L AN-cable RJ-45, 5 m (575899)
TDRA6000
incl. Certificate - MCA47, T-Scan Trigger/Probe Cable 2 m (576903)
TM6100A
- LASC-211 Scanner Controller (576909) - MAC64, Reference Sphere Ø25 mm (576913)
- MCA62, Scanner Sensor Cable, 10 m (576911) - Horizontal holder (576914)
- MPS21, Power Supply Unit (576873) - MAV67, Scanner Controller Feet Set (576915)
- LAN-cable RJ-45, 5 m (575899) - Certificate
- MCA47, T-Scan Trigger/Probe Cable 2 m (576903) L=49.6 cm, W=33.0 cm, H=25.6 cm (L=19.53”,
- MAC64, Reference Sphere d=30 mm (576913) W=12.99”, H=10.08”)
- MAC74, Reference Sphere Support (576923) Empty Transport Container only. Accessories to be
- MAP65, Horizontal Holder (576914) ordered separately.
- MAV67, Scanner Controller Feet Set (576916)
- MTC61, LAS-20-8 Transport Case (576910)
576922 MTC73, LAS-20-8 Trolley Case AT403
The Trolley Case can hold: AT930
AT960 opt.
- L AS-20-8 Absolute Scanner (576908) TDRA6000
- L ASC-211 Scanner Controller (576909) TM6100A
- MCA62, Scanner Sensor Cable, 10 m (576911)
- MPS21, Power Supply Unit (576873)
- L AN-cable RJ-45, 5 m (575899)
- MCA47, T-Scan Trigger/Probe Cable 2 m (576903)
576911 MCA62, Scanner Sensor Cable, 10 m - MAC64, Reference Sphere d=30 mm (576913)
AT403
The MCA62 Scanner Sensor Cable connecting AT930 - MAC74, Reference Sphere Support (576923)
the LAS-20-8 Absolute Scanner (576908) to
AT960 opt. - MAP65, Horizontal holder (576914)
TDRA6000
LASC-211 Scanner Controller (509). - MAV67, Scanner Controller Feet Set (576915)
TM6100A
- T-Probe III (576186)
- T-Probe Styli Kit (576231)
- MPB25, Battery external Li-Ion 37 V/8.1 Ah
576912 MCA63, Scanner Sensor Cable, 20 m (576875)
The MCA62 Scanner Sensor Cable connecting L=62.5 cm, W=50 cm, H=36.6 cm (L=24.60”,
the LAS-20-8 Absolute Scanner (576908) to W=19.70”, H=14.40”)
LASC-211 Scanner Controller (576909). Remark:
Empty Transport Container only.
Accessories to be ordered separately.
for concrete walls To charge the battery the 576873 MPS21 Power
- Set of cable ties for sensor cables Supply Unit is required (to be ordered separately).
- 5/8” threaded bolt for AT40x sensors. To mount the battery on stand/tripod the 576895
MSI26, Universal ATC Stand Fixture has to be
576941 MAS81, Wall Mount Fixture 35° ordered separately. Battery Specifications:
MAS81 fixture for inclined adaptation of AT9x0 37V/8.1Ah/299Wh.
sensors onto concrete walls or structures.
Adaptation of Leica Quick Release for AT9x0 576920 MAS71, Power Supply Unit Fixture AT403
The Power Supply Unit Fixtures holds a power AT930 opt.
sensors. AT960 opt.
Integrated safety lever for Quick Release handle. supply unit and gets attached to the stand. TDRA6000
Fixture Content: Therefore the power supply unit fixture keeps the TM6100A
For Apple Devices (iPodTouch, iPads, iPhones) a free AT Remote App available from Apple App Store.
It can be used to remote control any Windows application. Download AT Remote App here: http://itunes.apple.com/us/app/at-remote-app/
id567070189?l=de&ls=1&mt=8
More information and server software can be found here: http://metrology.leica-geosystems.com/en/Downloads_6843.htm?cid=3617
For Apple Devices (iPodTouch, iPads, iPhones) a free AT Remote App available from Apple App Store.
It can be used to remote control any Windows application. Download AT Remote App here:
http://itunes.apple.com/us/app/at-remote-app/id567070189?l=de&ls=1&mt=8
More information and server software can be found here: http://metrology.leica-geosystems.com/en/Downloads_6843.htm?cid=3617
levelling screws and shock absorbing wheels. that ruin the measurement quality. The MAT33 is
suitable for cleaning Leica Absolute Tracker Sensor
optics and as well the Leica Reflectors. The Kit
consists of:
- 1x Dust ex blower (167119)
296632 GST20 Tripod, Telescopic, with Accessories AT403 opt. - 2x Cleaning tissues (771349)
Robust, well-established tripod for general use. AT930
AT960
- 8x Cleaning swabs, larg (758346)
Suitable for levels, lasers, Total Stations and GPS. TDRA6000 opt. - 5x Cotton swabs, small (724954)
Extendible 180 cm (5.9 ft), weight 6.4 kg (14.1 lb). TM6100A opt. - 1x Cleaning brush (822420)
- 1x Cleaning Kit Bag (821236).
Quantity Radius
Centring Roundness Acceptance
Weight
TAPE TARGET REFLECTOR
of Optics (ball) angle
RED-RING REFLECTORS 1.5” (RRR) 763 532 GZM29, Reflective Tape, 20 x 20 mm AT403
for short range, pack of 20 pieces AT930
575 784 Red-Ring Reflector 1.5” 1 pc. 19.05 mm ±0.0025 mm < ±0.003 mm 0.003 mm ±30°, no limitation 170 g AT960
0.7500 in ± 0.00010 in < ±0.00012 in 0.00012 in due to ring 6.00 oz 763 533 GZM30, Reflective Tape, 40 x 40 mm TDRA6000 opt.
576 241 Red-Ring Reflector 1.5” 2 pcs. TM6100A
for mid range, pack of 20 pieces
576 242 Red-Ring Reflector 1.5” 5 pcs.
763 534 GZM31, Reflective Tape, 60 x 60 mm
576 243 Red-Ring Reflector 1.5” 10 pcs.
for long range, pack of 20 pieces
RED-RING REFLECTORS 7/8” (RRR)
576 311 Red-Ring Reflector 7/8” 1 pc. 11.1125 mm ±0.0025 mm < ±0.003 mm 0.003 mm ±30°, no limitation 35 g 576 389 CRT26 Circular Retro Target Tape AT403
(0.4375 in ± 0.0001 in) < ±0.00012 in 0.00012 in due to ring 1.23 oz outside ø 26 mm, central aperture ø 5 mm, AT930
576 312 Red-Ring Reflector 7/8” 2 pcs. AT960
light orange, for medium range pack of 100 pieces TDRA6000 opt.
576 313 Red-Ring Reflector 7/8” 5 pcs. TM6100A
576 314 Red-Ring Reflector 7/8” 10 pcs.
with offset 30 mm ±0.05 mm, magnetic fits to AT930 CCR1.5” reflector and CCR1.5” supports.
AT960
Target Base RB and RBC TDRA6000 opt.
TM6100A
571 549 Self-Adhesive Target Foils In case with spare cutout for CCR 1,5” reflector
AT403
black/white, ø 23 mm, 48 pieces on one sheet. AT930 (not included), dimension 250 x 200 x 70 mm,
AT960 weight with targets 1.1 kg.
TDRA6000
TM6100A opt.
COMPENSATION AND FIELD CHECK TOOLS 804 011 Magnetic Reflector Holder
for reflectors in spherical housings, ø 1.5”
AT403
AT930
opt.
opt.
AT960 opt.
with bolt hole for 575 497 TDRA6000 opt.
575 837 Tripod Adapter AT403
TM6100A
to be used for various alignment or AT930 opt.
AT960 opt.
compensation measurements. Thread for tripod TDRA6000 803 728 Magnetic Reflector Holder AT403 opt.
5/8”. Bore hole 12 mm (supports not included) TM6100A
for reflectors in spherical housings, ø 75 mm AT930 opt.
- Tripod reflector holder for consistent AT960 opt.
with bolt hole for 575 497and 575 599.
reference point TDRA6000
- Tripod reflector holder for consistent TM6100A
- Drawn to scale
reference point
- Steel with black oxide finish
- Steel with black oxide finish
575 484 AT28 Aluminium Tripod AT403
AT930 576 401 Mirror Tool AT403 opt.
with adjustable centre column. Robust,
AT960 to measure distances between 2 points with Laser AT930 opt.
well-established tripod for general use and 5/8” TDRA6000 AT960 opt.
Tracker using interferometer only. This basic set
thread. Suitable for Laser Stations, Theodolites TM6100A TDRA6000
includes 2 holders with reflector holders for 0.5” TM6100A
and Laser Tracker field check equipment.
and 1.5” (2 units each version 576073 and 576096)
Instrument height: from 1.4 – 2.8 m (4.6 – 9.2 ft)
This tool can be used also to generate nominal
Weight: 12 kg (26.4 lb)
distance values for the planned VDI/VDE standard.
1.5” REFLECTOR HOLDERS 577 135 Edge Reflector Holder 1.5” 24 mm stainless steel
577 001 Reflector Holder 1.5” 24 mm ø 6 mm ø 25.4 mm stainless steel 577 136 Edge Reflector Holder 1.5” 25 mm stainless steel
577 002 Reflector Holder 1.5” 24 mm ø 8 mm ø 25.4 mm stainless steel
577 137 Edge Reflector Holder 1.5” 1.0000” stainless steel
577 003 Reflector Holder 1.5” 24 mm ø 12 mm ø 25.4 mm stainless steel
577 101 Reflector Holder 1.5” 25 mm ø 6 mm ø 25.4 mm stainless steel
577 102 Reflector Holder 1.5” 25 mm ø 8 mm ø 25.4 mm stainless steel
577 103 Reflector Holder 1.5” 25 mm ø 10 mm ø 25.4 mm stainless steel
577 104 Reflector Holder 1.5” 25 mm ø 12 mm ø 25.4 mm stainless steel
577 140 Drift Nest 1.5” 1.0000” aluminum
577 120 Reflector Holder 1.5” 1.0000” ø 0.2500” ø 1.000” stainless steel
577 125 Reflector Holder 1.5” 24 mm shankless ø 40.64 mm stainless steel
576 102 Foundation Reflector Holder 1.5”
577 126 Reflector Holder 1.5” 25 mm shankless ø 40.64 mm stainless steel
577 127 Reflector Holder 1.5” 1.0000” shankless ø 1.6000” stainless steel
577359 1.5” to 7/8” adapter - to be able to use a 7/8” refector in a 1.5” nest.
577 201 Reflector Holder 0.5” 10 mm ø 5 mm ø 12.7 mm stainless steel
577 204 Reflector Holder 0.5” 10 mm ø 10 mm ø 0.75” stainless steel
577 205 Reflector Holder 0.5” 10 mm ø 12 mm ø 0.75” stainless steel 576 131 Double Vector for TBR, Shank A ø 0.2500” AT403 opt.
- Holds 2 0.5” reflectors on centreline and critical AT930 opt.
AT960 opt.
577 206 Reflector Holder 0.5” 12 mm ø 6 mm ø 12.7 mm stainless steel offsets to represent the centreline and direction TDRA6000
of a hole TM6100A
577 207 Reflector Holder 0.5” 12 mm ø 8 mm ø 12.7 mm stainless steel - Centring and height tolerance within 0.0127mm
(0.0005”)
577 208 Reflector Holder 0.5” 12 mm ø 12 mm ø 0.75” stainless steel - Steel with black oxide finish
MISCELLANEOUS
577 220 Reflector Holder 0.5” 10 mm shankless ø 12.7 mm stainless steel,
magnetic base
577 255 1.5” Total Station Sphere AT403
577 221 Reflector Holder 0.5” 12 mm shankless ø 12.7 mm stainless steel, A 1.5” Sphere for 3D manual sighting applications. AT930
magnetic base AT960
TDRA6000 opt.
577 222 Reflector Holder 0.5” 0.5000” shankless ø 0.5000” stainless steel, TM6100A
magnetic base
AT403 opt.
AT930 opt.
AT960-MR opt.
AT960-LR opt.
TDRA6000 opt.
TM6100A
577 259 1.5” to 0.5” Adapter AT403 opt.
To be able to use a 0.5” refector in a 1.5” nest AT930 opt.
AT960 opt.
TDRA6000
TM6100A
576183 µ-base
The stand alone ADM is a distance measument
unit with micron level resolution. The stand alone
ADM includes: Factory CD with basic measurement
SW, AC powersupply, cables, Tribrach mount with
fine motion screws and red transportation case.
AT960
range 40 mm; least count 0.01 mm TDRA6000 opt.
296632 GST20 Tripod Telescopic, with accessories AT403 opt.
TM6100A opt.
Robust, well-established tripod for general use. AT930
AT960
Suitable for levels, lasers, Laser Stations and GPS. TDRA6000 opt.
Extendible 180 cm (5.9 ft) Weight: 6.4 kg (14.1 lb) TM6100A opt.
417678 GAD12 Adapter Set AT403 opt.
translation stage onto any Leica tribrach; includes AT930
AT960
tribrach to mount instrument; typical adapter set TDRA6000 opt.
for theodolites and total stations. TM6100A opt.
EYEPIECES, FILTERS, DL2 LASERS AND 712504, which needs to be ordered separately.
AUTOCOLLIMATION ACCESSORIES
308838 FOK53 Eyepiece AT403
44 x magnification at 10 m (30ft), optically AT930
AT960
712504 Counterweight for Leica TM5100A/TM6100A AT403
adjusted and fitted in factory (only to be TDRA6000 opt. if steep angle GOK6 Eyepiece is attached AT930
ordered with new instrument) AT960
TM6100A opt.
TDRA6000
TM6100A opt.
CABLES
575725 AL51 Plug in Lamp AT403 574834 Cable 1 m AT403
Leica TM5100A/TM6100A AT930 connects DL2 and Intensity Regulator AT930
AT960 AT960
TDRA6000 TDRA6000
TM6100A opt. TM6100A opt.
SpatialAnalyzer® (SA) is a powerful, traceable and easy to The complete solution for truly large-scale assembly and inspection
use metrology and analysis software package, tailored for the based on Leica Geosystems Industrial Total Stations, provided by our
Hexagon metrology portable CMM family. Finnish partner A.M.S. and supplied by Leica Geosystems.
SA offers a vast number of benefits, including: DCP Pocket is a mobile large volume metrology software package on a
- Intuitive, state of the art graphical environment fully rugged Pocket-PC.
- Interfaces to all Hexagon metrology portable CMMs
- All common CAD exchange and native formats DCP05 is a 3D software included with every Leica TDRA6000 to quickly
- Advanced analysis and processing and unique alignment inspect and assemble parts, even on design data.
techniques
- Easy multiple instrument station bundling DCP Project gives you an analysis and job-preparation tool for all DCP05
- True GD&T and feature checks and DCP Pocket measurements incl. mS Excel® based reporting.
- Numerous reporting options
- Measurement uncertainty calculation
576424 DCP Pocket AT403 opt.
- USMN to achieve the ideal instrument network AT930
is a mobile large volume metrology software
- Integrated modern Scripting Language to automate complete AT960
package on a fully rugged Pocket-PC offering: TDRA6000 opt.
workflows
- Wireless Sensor Communication / Data Exchange TM6100A
- Multiple language support
- IP54 / 67 Standard for truly
- Free SA Viewer to share SA job files easily
Industrial Applications
- Feature Based measurements and
SpatialAnalyzer® makes metrology easy.
Reflectorless Scanning
- Sunlight readable touch screens
- Motorized and Automatic Inspection
- Data Viewer with Feature Group Display and
576728 Spatial Analyzer Professional (SA PRO) AT40x opt. Laser Pointer Function
AT930 opt. - Automatic Point Recognition
AT960 opt.
576729 Spatial Analyzer Ultimate (SA UL) during move Station Process
TDRA6000 opt.
TM6100A opt. - Compatibility with DCP Project and
DCP 05 Onboard
ASIA
Bangalore, IN
Qingdao, CN
Seoul, KR
Atsugi, JP
EUROPE
Gothenburg, SE
Trollhättan, SE
Eskilstuna, SE
Vantaa, FI
Telford, UK
Milton Keynes, UK
Waalre, NL
Paris, FR
Montoire, FR
Colomiers, FR
Bron, FR
Prague, CZ
Munich, DE
Waldburg, DE
Wetzlar, DE
a world where quality drives productivity. For more METROLOGY SOFTWARE SOLUTIONS
information, visit HexagonMI.com.
CAD / CAM
quality and productivity across geospatial and industrial MICROMETERS, CALIPERS AND GAUGES
enterprise applications.
DESIGN AND COSTING SOFTWARE
© 2017 Hexagon AB and / or its subsidiaries and affiliates. All rights reserved. This document is accurate as of its publication date.
Information is subject to change without notice.