Professional Documents
Culture Documents
Alliance Distributor For RFS Base Station Antenna AP906516 CT0
Alliance Distributor For RFS Base Station Antenna AP906516 CT0
Product Description
Well adapted for dense urban network
Features/Benefits
• Co-site interference reduction (F/B ratio, fast horizontal pattern roll-off).
• Improved capacity network by reducing co-site hand-off.
• Distance between antennas can be reduced thus minimizing visual impact.
• Broad bandwidth allows installation on all cellular standards.
• 2 side-by-side coupled antennas will lead to a 33° horizontal beamwidth for highway
coverage.
• Easy to install due to only 2 mechanical clamps independent of antenna size.
• Suitable for skew angle solution for high diameter site.
Technical Specifications
Electrical Specifications
Frequency Range, MHz 824-894 872-960
Horizontal Beamwidth, deg 65
Vertical Beamwidth, deg 8.5
Electrical Downtilt Range, deg 0
Gain, dBi (dBd) 17.0 (14.9) 17.5 (15.4)
Front-To-Back Ratio, dB >30 (Typ.35)
Polarization Vertical
VSWR < 1.5:1, < 1.3:1
3rd Order IMP @ 2 x 43 dBm, dBc >150
Impedance, Ohms 50
Maximum Power Input, W 1000
Lightning Protection Direct Ground
Connector Type/Location 7-16 DIN Female/Back
Mechanical Specifications
Dimensions - HxWxD, mm (in) 1977 x 262 x 140 (77.79 x 9.05 x 5.51)
Weight w/o Mtg Hardware, kg (lb) 10.9 (23.98)
Survival/Rated Wind Speed, km/h (mph) 200 (125) / 160 (100)
Wind Load @ Rated Wind, Front, N (lbf) 1017 (228)
Wind Load @ Rated Wind, Max., N (lbf) 1017 (228)
Wind Load @ Rated Wind, Side, N (lbf) 726 (163)
Wind Load @ Rated Wind, Rear, N (lbf) 996 (223)
Operation temperature, °C (°F) -40 to +60 (-40 to +140)
Radome Material/Color UV Resistant ASA/Light Grey RAL7035
Mounting Hardware Material Diecasted Aluminum
Radiating Element Material Aluminum
Reflector Material Aluminum
All information contained in the present datasheet is subject to confirmation at time of ordering
Packing Dimensions, HxWxD, mm (in) 2115 x 300 x 220 (83.23 x 11.81 x 8.26)
Ordering Information
Mounting Hardware APM40-2
Mounting Pipe Diameter, mm (in) 60-120 (2.36-4.72)
Mounting Hardware Weight, kg (lb) 3.4 (7.5)