Professional Documents
Culture Documents
Kaleeswaran Subramanian - CV
Kaleeswaran Subramanian - CV
9148690006
kaleeswaran2007@gmail.com
Summary
• Over 9+ years of experience in Low Voltage Panel design, coordination study, quality
control and development of Low Voltage Switchgears.
• Deft in swiftly coordinating projects with competent cross-functional skills and ensuring
on-time deliverables.
• Possess strong skills in design, co-ordination study, quality control & analysis.
• Skilled at tracking breakdowns and rectifying it for the smooth running of operations
using latest troubleshooting techniques. Adept in planning its cost within the pre-set
budgets.
• Well versed with Energy Management Techniques.
Employment Scan
SpectraA Technology Solutions Pvt. Ltd., Bangalore as a Sr. Electrical Design Engineer
Nov 2017 - May 2018
Responsibilities
> Design & sizing the Transformer, Generator capacity values for the Brewing and
distilleries plant.
> Design the Single Line Diagram and load calculations sheet for the Breweries Plant
based on the client requirements.
> Design the technical offer for the PCC, Synchronizing, MCC panel & final distribution
boards.
> Preparing Cable sizing & Voltage drop calculations.
> Review and approval the panel GA, power and control wiring diagram for the plant
electric panels.
> Review and approval the Electric panel, Cables & Instruments quotations from the
various vendors and finalizing the offer for the project.
> Assisting to PLC programmer's for the execution of the projects.
> Preparing the instruments lists like pressure, temperature transmitter and
respective cable selections.
Projects Executed
Responsibilities
> Design & execution of Low Voltage ACDC panels as per SEC standard specification
for 33/13.8kV, 110/33kV, 380/110kV substations.
> Design the Power & Control Schematic Diagram for MDB, MCC and ACB & PLC
Control panels.
> Preparing the coordination study curves and short circuit study calculations using
Simaris 8.0 Siemens Software & Eaton xSpider 3.0.
> Preparing Cable sizing & Voltage drop calculations.
> Sound knowledge of selection & sizing of switchgear components like Circuit
Breakers, Bus bars, Transformers, Protection Relays, CT's/PT's, Meters, etc.
> Study and usage of wide varieties of ABB, Siemens, SEL, AREVA, Schneider relays,
etc. as per project requirement.
> Well-versed in Siemens Sivacon Panels 8PT, 8PV & 8PQ & ABB Artu K, AM2 Cabinets
EATON xEnergy enclosures.
> Scrutinizing the design output and reviewing Engineering documentation and get the
drawings approval from client.
> Reviewing technical proposals and resolving technical issues with customers/sales in
order to prepare clear inputs for Engineering Activities
> Providing assistance and technical support to the tendering/estimation/sales,
procurement, manufacturing and testing & processing.
> Obtaining dispatch clearance in order to ensure timely dispatch & verification of as
built drawings & archive final documentation for projects.
> Preparing various project reports for identifying areas of obstruction / defects,
conducting troubleshooting, service and repair functions to rectify the equipment.
> Following-up for delivery and arranging for inspection.
> Proficient in Software's like ELECDES, AutoCAD, Simaris.
Projects Executed
> Preparing General Arrangement Drawings as per Form of Segregation and Degree of
Protection for Main Distribution Board, Sub Main Distribution Board and Motor
Control Center.
> Preparing SLD and Power Schematic Diagram for MDB, MCC and ACB panel
> Involved in Calculation of Power Factor Controller - Steps and Stages.
> Study and usage of wide varieties of ABB, Siemens, AREVA, Schneider relays, etc. as
per project requirement.
> Preparing Battery charger sizing calculations.
> Preparing Cable sizing calculations and selection.
Coordination Study
Projects Executed
Responsibilities
> Preparation of Quality related documents as per client's requirement such as Quality
control plan, ITP, Method statement and related work instructions and liaison with
the client for the approvals.
> Monitoring the installation and testing of various panels, such as synchronizing
panels, generator control panel etc., as per the approved procedures.
> Monitoring the installation and testing of Circuit breakers, Current transformers,
Capacitance voltage transformers, surge arrestors and Isolators as per the Quality
plan.
> Provided technical support to solve quality problems in product development and
manufacturing.
> Testing and programming the ABB & Dan Foss VFD's.
> Programming & Modification the touch screens at Local Control Panel.
> Proficient in application of Design Controls, Good Manufacturing Practices and ISO.
> Responsible for preparation of as built drawings.
PCS ELCTRIC PANEL (I) PVT LTD. CHENNAI as a Design Engineer
Nov 2007 - Jan 2010
Responsibilities
> Designing and drafting of MCC panels like ACC, PDB, PLC, HVAC, and RLDB.
> Preparation of General Arrangement (GA), Single line diagram (SLD) and also Power
& Control Diagrams.
> Checking up of Control Panels Physically as per GA.
> Preparation of Wiring Tables as per Circuit (Scheme) Diagrams.
> Preparation of Project Specific Bill of Materials in Excel.
Projects Executed
> MCC Panel for India Cements Ltd.
> VFD, PLC Panel for Sterling & Wilson Pvt. Ltd, end user: Nokia Siemens.
> PDB, RLDB, PCC and MCC for Astro Energy and Bio System Ltd.
Professional Credentials
B.E (Electronics & Communication Engg.) Syed Ammal Engg College
2007
Academic Credentials
• +2 from St.Francis Hr. Sec. School, C.K.Mangalam.
• 10 from St.Francis Hr. Sec. School, C.K.Mangalam.
IT Credentials
MS office, Outlook, AutoCAD, Elecdes,Simaris 4.0, PS501 Control Builder Plus.xEnergy
Personal Vitae
Date of Birth 10thMay, 1986
Father name K.Subramanian
Mother name S.Kasthuri
Languages Tamil, English
Passport G7223759
DECLARATION
I hereby declare that the information given above its true to the best of my knowledge and
belief.
(Kaleeswaran S)