Professional Documents
Culture Documents
Programming LG STB 2000 To Work With Mediatune
Programming LG STB 2000 To Work With Mediatune
Programming LG STB 2000 To Work With Mediatune
Table of Contents
Create a TLX programming file on a USB drive with the FTG File Manager……………………… 3
Troubleshooting…………………………………….……………………………………………………………………….. 16
http://www.lgsolutions.com/ftgsoftware/index.php?mode=2
o LG FTG File Manager v1.2.5
o Free-to-Guest (FTG) File Manage User Guide
http://www.lg.com/us/commercial/interface-control-boxes-and-cards/lg-STB-2000
o LG STB-2000 Commercial Mode Setup Guide
PC with STB Commercial Mode Setup Guide loaded and a USB port
USB thumb drive freshly formatted with FAT format
A LG TV remote control (not included with the STB 2000)
A IR receiver (not included with STB2000)
Create a TLX programming file on a USB drive with the FTG File
Manager:
Please review the STB-2000 Commercial Mode Setup Guide from LG before proceeding.
Step One:
Load the FTG File Manager Software on your PC and open the program.
Step Two:
Under Installer Menu Templates select STB-2000 from the drop down menu Click Load.
Step Three
Click on Update
In this example we have mapped channel 100 to RF channel 33-1 as a Pro: Idiom encrypted
channel. Channel label is mt100.
Click on Exit
Step Four
Technicolor Connected Home USA LLC
Phone (855) 297-5820
www.technicolor.com/mcs
5
Programming LG STB for Mediatune
Program STB user settings
#7 Start Volume
#8 Minimum Volume Customer dependent
#9 Maximum Volume
#49 TV Audio Mode TV Speaker (customer option)
#88 Noise Mute Enabled
#94 SAP Menu Enabled
#97 Audio Output Fixed Line Level
Step Five
Save .tlx file using consistent naming convention. Example: MT_CH100 or MT_CH33-1
Step Six
Each STB2000 on the Mediatune system must have a unique channel lineup. (Remember only
two channels per QAM in Mediatune)
It is not necessary to create installer files each time you create a new TLX file.
In the TLX File box click Open and select the first file you created from the Zenith/FTG/
TLX Directory
Double clicking on the file will load it into the TLX File Content box.
Technicolor Connected Home USA LLC
Phone (855) 297-5820
www.technicolor.com/mcs
10
Programming LG STB for Mediatune
Double click on the IMS information in the TLX File Contents box and it will move the contents to the
FTG Configuration List box. This file is all the Installer Menu Settings previously set up.
Repeat steps 3 and 5 to create a new TLX file with unique channel map for each STB2000
Step Seven
Copy TLX files from directory to a USB thumb drive freshly formatted for FAT files. (Do not copy the
directory folder, just the files)
NOTE: Please review STB 2000 manual before proceeding (detailed instructions start on page 47)
Step One
Connect an IR pennant to the “IR IN” connection on the back of the STB2000.
You should see a menu come on screen. The red light on the front of the box flashes when a remote
command is received.
Insert the USB thumb drive containing the TLX files into either USB port on the STB 2000
Select the file from the Teach to STB (TLX) box to learn to the STB2000.
The file will load on the STB2000 and it will then reset.
Troubleshooting
If you encounter problems you can reset the STB 2000 to factory default.
Press the menu button repeatedly until the menu no longer appears
Use the navigation keys on the remote to navigate to option 117 FACT Default
Use the right arrow key (>) and the number buttons to enter 413 in the numeric field to the right.
Press enter on the remote. The STB2000 will perform an instop reset procedure. The screen background
will go to all snow, press enter again to exit the installer menu. If the STB starts up to an installer Wizard
exit the program.
413