Professional Documents
Culture Documents
Ppro-Seal Natural Polypropylene Piping System
Ppro-Seal Natural Polypropylene Piping System
‡ PPro-Seal
Natural Polypropylene Piping System
www.us.piping.georgefischer.com 8.1
George Fischer, Inc. DOES NOT RECOMMEND the use of thermoplastic piping products for systems to
transport or store compressed air or gases, or the testing of thermoplastic piping systems with compressed air or
gases in above or below ground locations. The use of George Fischer, Inc. products in compressed air or gas
systems automatically voids George Fischer, Inc. warranty for such products, and their use against our
recommendation is entirely the responsibility and liability of the installer. George Fischer, Inc. will not accept
responsibility for damage or impairment from its products, or other consequential or incidental damages caused
by misapplication, incorrect assembly, and/or exposure to harmful substances or conditions.
For more information about any of our product lines, please call (800) 854-4090.
8.2 ¬ ‡
8
+GF+ PPro-Seal Pipe, Fittings and Valves ....................................................................................................................................8.10
www.us.piping.georgefischer.com 8.3
+ GF + PPro-Seal — Electrofusion
Mechanical Joints
Threaded fittings are the ideal solution if
future disassembly is needed.
Rugged
+ GF + PPro-Seal has excellent impact
Applications
+ GF + PPro-Seal's excellent chemical and
physical properties make it ideal for 8
water treatment, chemical processing,
and other applications where purity and
corrosion resistance is required.
Natural Polypropylene
+ GF + PPro-Seal pipe, fittings and valves
Excellent Chemical
are manufactured from a virgin
polypropylene copolymer compliant with and Corrosion Resistance Temperature
FDA requirements. + GF + PPro-Seal has excellent resistance and Pressure
Like all thermoplastic products +GF + to attack by most organic and inorganic Rating
PPro-Seal will not rust, pit, scale or chemicals in common use. In general, it
is attacked only by strong oxidizing Handles corrosive fluids
corrode. +GF + PPro-Seal is not subject to
acids and is weakened by certain up to 176°F (80°C),
electrolysis, providing years of
organic solvents and chlorinated beyond the range of
maintenance-free, leak-free service.
hydrocarbons. many thermoplastics.
Natural Polypropylene is only about 1/8
The maximum pressure
the weight of steel, for greater ease of
for the electrofusion
handling and faster installation.
system at 68°F (20°C) is
To prevent contamination in transit, all
+ GF + PPro-Seal pipe, fittings and valves
PRESSURE 150 psi (10 bar).
PSI PN
are specially wrapped and protected.
150 10
Specification for ‡
PPro-Seal Piping Systems 120 8
11/2” 1.900 22 31 37 43 48 53 57 61 65 68
2” 2.375 24 34 42 48 54 59 64 68 72 76
3” 3.500 29 41 51 59 66 72 78 83 88 93
4” 4.500 33 47 58 67 74 81 88 94 100 105
6” 6.625 40 57 70 81 90 99 107 114 121 128
8” 8.625 46 65 80 92 103 113 122 130 138 146
11/2” 1.900 31 43 53 61 68 75 81 86 92 97
2” 2.375 34 48 59 68 76 84 90 97 103 108
3” 3.500 41 59 72 83 93 102 110 117 124 131
4” 4.500 47 67 81 94 105 115 124 133 141 149
6” 6.625 57 81 99 114 128 140 151 161 171 180
8” 8.625 65 92 113 130 146 160 172 184 195 206
8.6 ¬ ‡
1 3
Size /2" / 4" 1" 11/2" 2"
psi (bar) 150 140 140 120 150
8
Surge Pressure
The following table gives the surge
pressure (water hammer) in copolymer
polypropylene pipe for various velocities
at 73°F (23°C). The surge pressure
should be added to the static line
pressure to determine the maximum
system operating pressure. In no case
should this be over 11/2 times the recom-
mended working pressure. This will,
under normal conditions, ensure ad-
equate safety to absorb the shock of
closing valves.
www.us.piping.georgefischer.com 8.7
8.8 ¬ ‡
;;;
;;;
;;;;;;
;;; ;;;;;;;;;;;;; ;;;;;;;;;;;; ;;;;;;;;;;;
;;; ;;;;;;;;;;;;;
W
;;;;;; ;;;;;;;;;;;; ;;;;;;;;;;;
H
;;;
;;;
;;;;;;
;;;
;;;;;;;;;;;;;
;;;;;;;;;;;;;
H H ;;;;;;;;;;;;
;;;;;;;;;;;; H ;;;;;;;;;;;
;;;;;;;;;;;
;;;
W W W
Note 2: These are soil loads only and do not include live loads.
www.us.piping.georgefischer.com 8.9
Tee
Inch Size Part Number sp/mp lbs. each hj g
1
/2 801-005F 5/25 0.05 1 7/32 1
/2
3
/4 801-007F 5/100 0.07 1 3/ 8 19
/32
1 801-010F 5/35 0.13 1 11/16 23
/32
1 1/2 801-015F 5/30 0.23 2 1/32 1
2 801-020F 5/10 0.35 2 5/16 1 1/4
90° Ell
Inch Size Part Number sp/mp lbs. each hj g
1
/2 806-005F 10/100 0.04 1 7/32 1
/2
3
/4 806-007F 10/100 0.05 1 3/ 8 19
/32
1 806-010F 10/60 0.09 1 11/16 23
/32
1 1/2 806-015F 10/40 0.18 2 1/32 1
2 806-020F 10/30 0.27 2 5/16 1 1/4
45° Ell
Inch Size Part Number sp/mp lbs. each hj g
1
/2 817-005F 10/30 0.03 1 1/32 5
/16
3
/4 817-007F 10/80 0.05 1 1/8 11
/32
1 817-010F 10/40 0.08 1 3/ 8 13
/32
1 1/2 817-015F 10/40 0.15 1 9/16 17
/32
2 817-020F 10/30 0.21 1 23/32 21
/32
8.10 ¬ ‡
Cap
Inch Size Part Number sp/mp lbs. each hj g
1
/2 847-005F 10/30 0.02 1 5/32 7
/16
3
/4 847-007F 10/40 0.03 1 1/4 7
/16
1 847-010F 10/40 0.05 1 1/2 17
/32
1 1/2 847-015F 10/40 0.10 1 23/32 11
/16
2 847-020F 10/40 0.17 1 27/32 25
/32
8
Flange with Backing Ring
inch Part lbs. # bolts bolt
size Number sp/mp each holes d. circle d. m r l n
1 1 15 1
/2 851-005F 5/30 0.13 4 /2 2.38 3.50 0.41 /16 /8
3 1 1
/4 851-007F 5/30 0.18 4 /2 2.75 3.88 0.47 1 /8
1
1 851-010F 5/30 0.25 4 /2 3.13 4.25 0.53 1 3/16 1
/8
1 1/2 851-015F 5/20 0.40 4 1
/2 3.88 5.00 0.66 1 1/4 1
/8
5
2 851-020F 5/20 0.62 4 /8 4.75 6.00 0.71 1 3 /8 3
/16
Coils
Inch Size Part Number sp/mp lbs. each
1
/2 6076 1 0.0003
3
/4 6077 1 0.0004
1 6078 1 0.0005
1 1/2 6086 1 0.0006
2 6089 1 0.0007
‡ PPRO-Seal
P/L 10: Valves
Material: Natural Polypropylene (2" Valve Body PVDF)
8.12 ¬ ‡
www.us.piping.georgefischer.com 8.13
8.14 ¬ ‡
Cap (FT)
Inch Size Part Number sp/mp lbs. each w t min.
1
/2 848-005F 10/50 0.02 1 5/32 11
/16
3
/4 848-007F 10/40 0.03 1 1/4 11
/16
1 848-010F 10/40 0.05 1 1/2 13
/16
1 1/2 848-015F 10/40 0.10 1 23/32 7
/8
2 848-020F 10/40 0.17 1 27/32 15
/16
8
Flange (FT) without Backing Ring
Inch Part lbs. # of bolts bolt
size Number sp/smc each holes d. circle d. m r l t min.
1 15 11
/2 852-005F 5/30 0.13 4 1/2 2.38 3.50 0.41 /16 /16
3 11
/4 852-007F 5/30 0.18 4 1/2 2.75 3.88 0.47 1 /16
1 852-010F 5/30 0.25 4 1/2 3.13 4.25 0.53 1 3/16 13
/16
1 1/2 852-015F 5/30 0.40 4 1/2 3.88 5.00 0.66 1 1/4 7
/8
2 852-020F 5/20 0.62 4 5/8 4.75 6.00 0.71 1 3 /8 15
/16
www.us.piping.georgefischer.com 8.15