Professional Documents
Culture Documents
HCL 10.5.4 - OSx86
HCL 10.5.4 - OSx86
HCL 10.5.4 - OSx86
4
From OSx86
This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts
you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. macOS 10.5.4
Contents
1 Motherboards
1.1 Abit
1.2 Albatron
1.3 AOpen
1.4 Asrock
1.5 Asus
1.6 Biostar
1.7 DFI
1.8 ECS
1.9 Elitegroup
1.10 EPOX
1.11 eVGA
1.12 Foxconn
1.13 Gigabyte
1.14 Intel
1.15 Jetway
1.16 MSI
1.17 Shuttle
1.18 Supermicro
2 Processors
2.1 AMD
2.2 Intel
3 Graphics Cards
3.1 AGP
3.1.1 ATI
3.1.2 NVIDIA
3.2 PCI Express
3.2.1 ATI
3.2.2 NVIDIA
3.3 Integrated
4 Network Cards
4.1 Wireless
4.2 Wired (Ethernet)
5 Sound Cards
6 Other Accessories
Motherboards
Abit
INTEL CPU
Hardware Name (alphabetical) Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
AMD CPU
Hardware Name (alphabetical) Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
....
Albatron
Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
AOpen
Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
.........
Asrock
INTEL CPU
Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
AMD CPU
EFI/Vanilla
Hardware
Chipset Notes kernel Fully Working w/o Patch
Name
working
ALiveNF6G- Ideneb
nForce 430 Patch "only ethernet doesn't work"
VSTA 10.5.4
...
Asus
EFI/Vanilla
Hardware
Chipset Notes kernel Fully Working w/o Patch
Name
working
Not tested
PRO 8300 ACHI enabled It picked up the USB Mouse,
selected the first NVIDIA video driver on the list during installation. Keyboard, Webcam, and Mic
Install Method: 10.5.4 JaS Client/Server (after install needs kernel update to 9.4.0 StageXNU)
BIOS Version: 1005
BIOS setup options: SATA Enabled, DVD player on secondary master, parallel & serial ports disabled, floppy controller disabled
Audio: ADI AD1980 works fairly well. Plug on MIC. Low signal. EFI/Vanilla
VIA VT8237 -
P4V8X-X LAN: Realtek RTL8201BL works OOB with Rhine II kernel Fully Working w/o Patch
P4X533
SATA & IDE: works OOB working
USB: all working
Install from DVD IDE Optical drive on IDE HD
Boot from Linux GRUB (installed on SATA drive)
PS/2 Keyboard & Mouse, even during install. No patches. No USB ones needed.
Video board: first I installed NVKush, NVDarwin and NVInject and got NVIDIA 8500 GT 512NVRAM recognized but without QE/CI.
Then removed /System/Library/Extensions/NVinject.mkext and /System/Library/Extensions.mkext (do this as root from bash),
rebooted and it just worked. Haven't tried to get IGP working (Intel 3100), but it isn't detected by Windows too, anyway, because I put
PEG/PCI instead of PEG/IGP in BIOS :P (I'll try and post results later). <edit> Ok, tried PEG/IGP and it doesn't work, it seems to be a
motherboard/chipset hardware issue. However my NVIDIA external card has both DVI and VGA output. Using a DVI-to-VGA converter
and using second VGA output to second monitor did work out of the box (in both Windows & Mac). </edit>
Multiboot: had Windows XP installed before installing iAtkos. iAtkos installed multiboot gestor, recognized Windows XP and both O.S.
boot just right. I had to create a new partition on empty space with fdisk, and set type to 0xAF (not sure, type help and use HFS+
number which I think it is AF), then go to disk utility and format it but don't put spaces in the volume name (such as Mac OS X, My
disk, Spaces between words, etc...) or NVKush and other patches will fail to install.
Patches selected for install: Bootloaders: Darwin EFI Bootloader & Chameleon Bootloader; Additional Patches: Software Update
Enabler & OHR; Drivers: NVkush, NVinject (don't install if you have 8500gt and want QE/CI), EFI strings for NVIDIA, 8xxx, 8500 GT
512MB, Intel ICHX SATA, Other Intel SATA, Speedstep, Intel Speedstep new, NTFS-3G & Realtek R1000.
.........
Biostar
Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
TA690G AM2 north bridge: AMD 690G Install: [AMD] Lawless Phenom Leopard 10.5.4
( LawlessPPC-Leo-10.5.4-Phenom&AMD )
Need NVInstaller v4.1
with AMD Athlon 64 X2 Dual Core Processor 5600+ 2.8GHz south bridge: SB600 sound: Realtek ALC888 8-ch
net: Realtek RTL8111B
.......................................
DFI
Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
......
ECS
EFI/Vanilla
Hardware Name Chipset Notes Fully Working w/o Patch
kernel working
Patched BIOS has to be used for the mobo. In the bios ENABLE the Intel XD bit
Used distro: JAS 10.5.4 Client/Server intel SS2/SS3
1. Kernel: Vanilla
2. Chipset: ICHx
ECS G31T-M with Intel G31 + 3. Audio: Azalia (no line-in/mic) Everything works flawlessly
Yes/Yes
Intel Q6600 Intel ICH7 4. SMBIOS: by default after installation
All works but the network, patch needed (link here (http://www.realtek.com.tw/downloads/downloadsView.aspx?
Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTypeID=3&GetDown=false) )
Reboot works nice but with shutdown there are issues
...........................................................
Elitegroup
EFI/Vanilla kernel
Hardware Name Chipset Notes Fully Working w/o Patch
working
Nforce 450; XFX Nividia Geforce 4. Audio Driver: AC97 Everything but the network (which requires an update to
AMD Athlon 3200+ (64 Vanilla Kernel: No -
7200GS with latest nvinject 5. SMBIOS: by default 10.5.4). Everything else is on the install DVD.
bits with SSE3) 2 GHz CPU is an AMD
All works, but if the network doesn't work you can
try with nForceController.kext
Shutdown and reboot both work well but sleep
freezes the system (graphics KEXT suspected)
.................
EPOX
EPOX Intel ICH7 Everything works, no patch needed Everything needed is on the DVD (except audio - fix
Vanilla Kernel:
5G945-M /G chipset Sound (ALC655) works with modified AppleAC97Audio.Kext [1] is in the notes section.
Working.
(http://forum.insanelymac.com/index.php?act=attach&type=post&id=36109)
eVGA
Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
......
Foxconn
Hardware Name (alphabetical) Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
Using A Retail 10.5.4 Disk and Generic Boot132, everything except sound works OOB.
Foxconn G31MXP-K Intel G31 + Intel ICH7 Requires OpenHaltRestart to properly Restart and Shutdown. Yes, Using Chameleon 2.0 RC1 All, but sound
Great Budget system board!
..............................
Gigabyte
Hardware EFI/Vanilla kernel
Chipset Notes Fully Working w/o Patch
Name working
Used Kalyway 10.5.2 (need to set to AHCI in BIOS and install in first partition of drive).
USB, FireWire and Ethernet : All work OOB
Intel P45 EFI: works (EFI v8)
GA-EP45-DS4 Video card : Asus Radeon HD3650 works with patch Everything but audio.
ICH10 Vanilla kernel: works
Processor: Intel Quad Core Q6600 @ 3.2GHz, system name: 'Unknown' but you can change this
with OSX86Tools.
...........
Intel
Jetway
The GMAX3500 can't change resolution & don't have qc/qe maybe work thestevo's kext.
Do shutdown, reboot and sleep work? Needed pystar kext OpenHaltRestart.
Network Intel® 82566DC Gigabit Ethernet Controller needed Intel82566MM.kext.
Sound ALC888S needed Azalia.kext.
All works, except the GMA3100 can't change resolution & don't have qc/qe
Do shutdown, reboot and sleep work? perfect
Don't UPDATE BIOS to 0057 [PRG3110H.86A](Last One) Becouse the USBs don't works, excepts for the keyboard.
Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
...
MSI
EFI/Vanilla
Hardware
Chipset Notes kernel Fully Working w/o Patch
Name
working
Support Intel ONLY
LawlessPPC 10.5.4
Set the BIOS to IDE instead of AHCI. That worked for me, although not for
others.
K9A2 AMD Select Drivers your your hardware (Use VIA ATA Driver for Chipset) Everything you need is on the DVD except Audio. Use the ALC888 patch found here:
Voodoo Kernel
Platinum 790FX After install, use these kernel flags: -v -f -x maxmem=2048 (If you have 4GB http://www.insanelymac.com/forum/index.php?showtopic=206380
RAM or more) and cpus=1 (If you have a multi-core CPU)
The OS Should boot and then you can drop the -x and -f flags from any
subsequent boots (and the -v if you wish)
..............................................
Shuttle
Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
SN68SG2 NForce 630a w/ AMD kernel iDeneb 10.5.4 working except for audio, ethernet
Supermicro
Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
.........................
Processors
AMD
?Fully Working?
Quad-Core
All 8gb of RAM show up
Just worked with kernel on LawlessPPC Install DVD
About this Mac: 3.1 GHz Unknown
AMD Phenom II X2 550 Seems to be working apart from one core needs to be System Profiler: AMD Phenom(tm) II X2 550 cpus=1 needs to be applied at boot or in boot.plist
disabled Processor
....
Intel
Model Notes Recognized as Fully Working w/o Patch
Intel Celeron D 320 Working 2.4GHz Unknown Yes
Intel Celeron D 346 Working 3.06GHz Unknown Yes
Intel Celeron 420 Working 1.6GHz Unknown Yes
Yes - WOrked with TOH kernel and
Intel Pentium 4
Working Intel 2.8Ghz Unknown APCI binary patched with OHR fix
Prescott 2.8GHz
on iAtkos release (4.1i)
Pentium® 4 630
Working Unknown Yes (ToH kernel)
(Prescott)
Intel Pentium 4 540
Working 3.2GHz Unknown Yes
(Prescott)
Intel Pentium 4 HT Working 3.2Ghz Unknown Yes
Intel Pentium 4
Working 3GHz Unknown Yes
3GHz HT
Intel Pentium 4
Working 3.6GHz Unknown Yes
3GHz
Intel Pentium 4 660 Yes (Kalyway_10.5.2;
Working 3.6 GHz
3.60GHz kernel_9.2_speedstep)
Intel Pentium D
Working Unknown Yes
2.8GHz
Intel Pentium D
Working Unknown Yes
3.4GHz
Intel Pentium D 820 Working 2.8Ghz Unknown Yes
Intel Pentium D 915 Working 2.8GHz Unknown Yes
Intel Pentium D
Working 3GHz Unknown Yes
9325 Presler
Intel Pentium D 930 Working 3GHz Unknown Yes
Pentium® D 935
Working Unknown Yes (ToH kernel)
(Presler)
Intel Pentium D 950 Working Unknown Yes
Celeron Dual-Core
Working 1.6 GHz Intel Core 2 Duo Yes
E1200 1.6ghz
Pentium Dual-Core
Working 1.6 GHz Intel Core 2 Duo Yes
E2140 1.6ghz
Pentium Dual-Core Clocked at
1.84GHz Intel Core 2 Duo Yes
E2140 1.6GHz 1.84GHz
Pentium Dual-Core
Working 1.8 GHz Intel Core 2 Duo Yes
E2160 1.8ghz
Pentium Dual-Core
Working 2.2 GHz Intel Core 2 Duo Yes
E2200 2.2ghz
Pentium Dual-Core
Working 2.5 GHz Unknown Yes
E5200 2.5GHz
Intel Core Duo
Working 2.0 GHz Intel Core Duo Yes
T2400 1.83GHz
Intel Core Duo
Working 2.0GHz Unknown Yes
T7200
Intel Core 2 Duo
Working 2.0 GHz Intel Core 2 Duo Yes
T7250
Intel Core 2 Duo
Working 2.19GHz Unknown, reported correctly in System Profiler + Features. Yes
T7500
Intel Core 2 Duo
Working 1.8GHz Intel Core 2 Duo Yes
E4300, Allendale
Intel Core 2 Duo
Working 2.0GHz Intel Core 2 Duo Yes
E4400, Allendale
Intel Core 2 Duo
Working 2.2GHz Intel Core 2 Duo Yes
E4500, Allendale
Intel Core 2 Duo
Working 2.4GHz Intel Core 2 Duo Yes
E4600
Intel Xeon E5410
Working 2.33GHz, 2 Processors, 8 Cores Yes
(Dual Quad-Core)
Intel Core 2 Duo
Working 1.86GHz Core 2 Duo Yes
E6300, Conroe
Intel Core 2 Duo
Working Core 2 Duo 2.8Ghz Yes
E6300
Intel Core 2 Duo
Working Intel® Core(TM)2 CPU 6320 @ 2.69GHz (slightly OCed...) Yes
E6320
Intel Core 2 Duo
Working 2.13 Ghz Intel Core 2 Duo Yes
E6400
Intel Core 2 Duo
Working 2.13 Ghz Intel Core 2 Duo Yes
E6420
Intel Core 2 Duo
Working 2.33 Ghz Intel Core 2 Duo Yes (Vanilla Kernel)
E6550
Intel Core 2 Duo
Working 2.4 GHz Intel Core 2 Duo Yes (Vanilla Kernel)
E6600
Intel Core 2 Duo Working
3.0 GHz Intel Core 2 Duo Yes (Vanilla Kernel)
E6600 (Overclocked)
Intel Core 2 Duo
Working 2.67 GHz Intel Core 2 Duo Yes (vanilla kernel)
E6750
Intel Core 2 Duo
Working 3GHz Intel Core 2 Duo Yes (Vanilla Kernel)
E6850
Intel Core 2 Duo Yes, works with Kalyway, iDeneb,
Working 2.53 Ghz Intel Core 2 Duo E7200
E7200 Jas and Leo4all with Vanilla Kernel
Intel Core 2 Duo
Working Intel Unknown @ 2.67 GHz Yes
E8200
Intel Core 2 Duo Clocked at 4
Shown as "4 GHz Unknown" Yes (Vanilla Kernel)
E8400 GHz
Intel Core 2 Duo
Working 3.16GHz Intel Core 2 Duo E8500 Yes (Vanilla Kernel)
E8500
Intel Core 2 Duo
Working 2.0GHz Intel Core 2 Duo Yes Retail DVD w PC-EFI
T5800
2.4 GHz Unknown. Apple never adapted Q6600 on their machines and that is why it shows unknown. But the processor is working
Intel Core 2 Quad fine (at least on mine). To fix this, change "Unknown" to "Intel Core 2 Quad" in
Working Yes
Q6600 /System/Library/CoreServices/Resources/English.lproj/AppleSystemInfo.string and verify if About This Mac displays what you just
edit.
Intel Core 2 Quad
Working 2.66 ghz Unknown Yes
Q6700
Yes but cannot get Temperature
Intel Core 2 Quad
Working Unknown 2.5ghz Monitor to show core
Q9300
temperatures :(
Intel Core 2 Quad Working Genuine Intel CPU 2.66GHz 3.2Ghz Yes (Vanilla Kernel)
Q9450 (Engineer
Sample B1 version)
Intel Core 2 Quad
Working 3 GHz unkown Yes (Vanilla Kernel)
Q9450 @ 3 GHz tray
Intel Core 2 Extreme
Working Not checked Yes
QX9650
Working,
Intel Xeon E3110 Xeon version 3.0 GHz Unknown Yes
of E8400
Intel Xeon 5405 Working 2GHz Unknown Yes
...................................................................................................
Graphics Cards
Please specify if your card is AGP, Integrated, PCI or PCI-E.
AGP
ATI
NVIDIA
...................
PCI Express
ATI
Hardware Board-
Notes QE / CI Resolution Fully Working w/o Patch
Name Manufacturer
Radeon
Works with the NatitX1300 r1v1 Installer Download
X1300 Pro ATI Both All Resolutions No, not fully. You can just use DVI - but there's no prob to adapt it.
(http://rapidshare.com/files/112931217/NatitX1300.r1v1.Installer.zip.html)
256MB
ASUS
EAX1600 ASUS Works with manual modify the video kext with your id] Both All Resolutions fully working.
Pro 256MB
Used Maclovin's patch from here
Radeon
(http://forum.osx86scene.com/viewtopic.php?
X1600P ATI Both All Resolutions Yes with patch
f=16&t=2312&sid=77e0703dc5c8af2de3e774074bf5e864) and added the
256MB
deviceID 71C2 in ATIRadeonX1000.kext after intstall
Radeon
X800GT Sapphire Works with Zephyroth AMD 10.5.2 Rev.1 Unknown 1280x1024 Yes
256MB
Working with with Modbin's Driver patch. Install the Apple Graphics
Update first (here (http://forum.insanelymac.com/index.php?
showtopic=35733&st=80) is the installation file).
Radeon
Added: In my case, somehow installation of Modbin's package did
x1650 Pro Sapphire No DVI Yes All
not does the job. However, I extracted the kexts from the installation
256MB
package matching with my device ID (using Pacifist) and drag those
kexts to /System/Library/Extension, authenticate and replace, then I
got QE/CI/Rotation and resolutions (though missing 1680x1050).
Radeon QE
X1800XT ATI Diabolik's X1800 Natit, enter Dev ID in ATIRadeonX1000.kext Works, CI All Resolutions Yes with patch
512MB Works
Radeon
X1600XT
ATI x1x00 Video Cards on Leopard QE
256Mb GeCube (ATI
(http://forum.insanelymac.com/index.php? Works, CI All Resolutions Yes with patch
DDR3 (0x1002))
showtopic=69345&pid=508765&mode=threaded&start=) Works
(Device ID
0x71c0)
Radeon QE
X1900XT Connect3D No Patches Works, CI All Resolutions Yes
512MB unknown
Radeon
Both
X1900XT Saphire Used X1900_XT_EFI_VGA_Installer_0.1.pkg All Resolutions Yes
work
512MB
Radeon
X1900XTX ATI No Patches Yes All Resolutions Yes
512MB
Radeon Bronya's 10.5.2(9c16) patch here
X1950 Pro Sapphire (http://forum.insanelymac.com/index.php?showtopic=58988) (Note: c16 Yes Yes Needs Bronya's patch.
256MB works QE/CI and RC, c32 only RC)
Radeon
Bronya's 10.5.2 patch here
X1950 Pro Powercolor Yes Yes Needs Bronya's patch as described.
(http://rapidshare.com/files/91667875/10_5_2_9c31.zip)
512MB
Radeon
Used this (https://www.mediafire.com/?4y28bm1z2ey) kext to enable full
X1950 XTX Sapphire Yes All Resolutions Fully working with patch
support
512MB
Mobility 1280x800x32 (not
Radeon Read [6] (http://forum.insanelymac.com/index.php? always work,
ATI Yes Working with patch (some mouse tearing, some video glitches)
X2300 showtopic=87983&st=0&gopid=635864&#) depends on laptop
128MB model)
ATI Radeon Used Netkas Newest Natit -->here (https://www.mediafire.com/?
No... Need Natit Feb 26 plus you MUST use the DVI port w/ a DVI to
HD 2400 ATI taajnazpvsm) from Feb. 26 along with editing ATIRadeonX2000.kext with Yes All Resolutions
VGA adapter to get things working with this card!
PRO 256MB Dev ID 94c3
ATI Radeon
HD 2600XT Sapphire Used Natit; DeviceID: 0x9588 Yes All Resolutions Yes with Natit
256MB
HD 2600XT
PowerColor Working out of the box, both heads Yes
256MB
ATI Radeon New natit.kext from Netkas as of 2/26 here (https://www.mediafire.com/? No, need natit.kext from netkas (new 2/26). w00h00, sleep now
Sapphire Yes All Resolutions
HD 2600XT taajnazpvsm) works.
ATI Radeon New Natit.kext from Netkas required (feb/26/2008) same as Installation- All Resolutions, Dual No OOTB, needs Netkas' NATIT. Here NO sleep with Asus P5LD2 VM /
Sapphire Yes
HD 2600XT Hints (http://incomplete-news.metaparadigma.de/?p=41) Head, Pivot edit: sleep now works for me aswell, was mobo config issue...
New Natit.kext from Netkas required (feb/26/2008) same as Installation-
ATI Radeon
Hints (http://incomplete-news.metaparadigma.de/?p=41) and Kext All Resolutions, Dual
HD 2600XT Gigabyte Yes No, needs Netkas' NATIT (26.02.2008)
Installation-Hints (http://forum.insanelymac.com/index.php? Head, Pivot
256MB
showtopic=54098)
ATI Radeon
HD 2600XT Diamond Yes Yes All Resolutions Works out of the box.
512MB
New ATIRadeonX2000_Leopard.pkg from here
ATI Radeon
ONDA (https://www.mediafire.com/?vjg1jwiv2ni) (only one package with Yes All Resolutions Fully working with patch.
HD 2600pro
netkas's natit 2/26/08 and white menu fix)
ATI Radeon
HD 2600pro Visiontek Yes With ATIRadeonX2000_Leopard.pkg Yes All Resolutions Works with patch.
512MB
ATI
RADEON
SAPPHIRE TRIAKIS AND WHITE MENU YES ALL RESOLUTIONS YES
HD 2600
PRO 512
ATI Radeon
White Menu Fix from (https://tinyurl.com/ypdae8) and adding device id
HD 2600Pro ASUS Yes All Resolutions Yes without Natit patch
to ATIRadeonX2000.kext
512Mb
ATI Radeon
HD 2600 Gigabyte Used ATIRadeonX2000 Leopard.pkg Both All Resolutions No, needs patch
Pro 512MB
ATI Radeon
ATI Unknown patches used Yes All Resolutions Yes - Not known if patch used
X2900XT
ATI Radeon
No patch, but driver from this post
HD 3650 Used the driver from this post (http://forum.insanelymac.com/index.php?
ATI Both All Resolutions (http://forum.insanelymac.com/index.php?
1024MB s=&showtopic=107526&view=findpost&p=767227)
s=&showtopic=107526&view=findpost&p=767227)
DDR2
Radeon HD Asus Driver from this post (33) (http://forum.insanelymac.com/index.php? Both All Resolutions Works fine
3650 512MB s=&showtopic=107526&view=findpost&p=767227) . Tested with
DDR2 Kalyway52-4, Atkos54, Leo4Allv4.1 (DVI/VGA). A cheap (50€) and energy
(EAH3650 efficient (10W/65W), silent card - Crysis in low res still playable.
SILENT
MAGIC)
Used the installer from this post
Radeon HD (http://forum.insanelymac.com/index.php?
3650 512MB Sapphire s=&showtopic=107526&view=findpost&p=767227) , on iATKOS 2.0i. No Both All Resolutions Works, with the mentioned installer.
DDR2 need for aditional patching, kexts editing etc. Connected to a VGA
monitor, using a dvi2vga adapter.
Used the installer from this post
Radeon HD (http://forum.insanelymac.com/index.php?showtopic=107526&st=20#) ,
3650pro Dont use Kalyway Combo Update 10.5.3, or you'll get white menu bugs.
HIS Both All Resolutions Works, use ATI Radeon HD.pkg for 3650 version.
256MB Install the package, then install Jas Combo Update 10.5.3 No need for
DDR2 aditional patching, kexts editing etc. Connected to a VGA monitor, using a
dvi2vga adapter.
All Resolutions
ATI Radeon (Monitor Max @ Doesn't work without patches. Also only cards with BIOS version 102
Gigabyte Latest Natit.kext and White_menus_fix Yes
HD 3850 1680x1050 on both or earlier work. BIOS version 103 is not yet compatible.
heads)
ATI Radeon Installer found from irc.osx86.hu channel #radeonhd then White menu Fully Yes Up to 1080p
HiS No
HD 3850 fix also from IRC Channel working 1920x1080
All Resolutions
ATI Radeon Triakis and latest 38x0 drivers from Leopard-10.5.2-AMD-EFI DVD (Monitor Max @ Patches incorporated in Leopard-10.5.2-AMD-EFI DVD or elsewhere
Sapphire Yes
HD 3870 (netkas's originals work too.) 1680x1050 on both obtained netkas/triakis kexts required.
heads)
ATI Radeon Both
Sapphire Used Natit.kext All Resolutions Fully working with patch
HD 3870 Work
ATI Radeon
HD 3870 All ok with the driver from here
Sapphire Yes All Resolutions All fine
ultimate (http://forum.insanelymac.com/index.php?showtopic=107526&st=0)
(passiv)
ATI Radeon
HiS Works perfectly with the kext extracted from Kalyway 10.5.2 DVD Both All Resolutions Works great without patch
HD 3870
1152x864 by adding
a line in boot.plist
ATI Radeon
(although I tried
HD 4650 - MSI Works at default Resolution (1024x768) without additional drivers ? ?
1440x900, this is
1GB DDR2
what it defaulted to
afterwards)
..........................................
NVIDIA
Hardware Board-
Notes QE / CI Resolution Fully Working w/o Patch
Name Manufacturer
Works with iDeneb v1, Leo4All v4.1 and Graphics fix - instructions
GeForce Go nVidia shared included (https://www.mediafire.com/?0dnwxihyqn5) QE - not supported / Multiple resolutions
No
6150 memory CI - software supported
128MB vram - updated in BIOS
GeForce
7600GT Gigabyte NVinject or Natit QE/CI both work All resolutions work Fully working
256MB
GeForce
7600GT NVIDIA None QE/CI both work All resolutions work Yes
256MB
GeForce
7600GT Winfast NVInject 0.20 Both All resolutions work Yes
256MB
GeForce
7600GT Eagle NVinject or Natit QE/CI both work All resolutions work Yes
256MB
GeForce
7600GT
Zotac NVinject QE/CI both work All resolutions work Yes
256MB
GDDR3
GeForce
7600GT-OC MSI NVinject or Natit QE/CI both work All resolutions work VIVO doesn't work otherwise fully functional
VIVO 256MB
GeForce
NVinject (ASUS P5B-MX), EFI-string using EFIStudio (Gigabyte GA-
7600GT MSI QE/CI both work All resolutions work Needs patch for resolutions and memory detection
G31M-S2L)
Silent 256MB
GeForce
7600GT XFX NVinject, Natit or GFX-String QE/CI both work All resolutions work Yes, with NVinject, Natit or GFX-String
256MB
GeForce
7600GT eVGA NNInject 0.1.5 QE/CI both work All resolutions work Yes with NVInject
256MB
GeForce
7800GT NVIDIA Kalyway NVIDIA patch Unknown Not all Need patch from Kalyway
256MB
GeForce CI: Hardware Dell 1702FP recognized, up
NVinject 0.2.0 (Kalyway_10.5.2; NVinject-256). Both DVI ports
7800GT eVGA Accelerated. QE: to 1280 x 1024 x 75Hz x with NVinject
recognized; have not tested dual monitor.
256MB Supported millions;
GeForce
7800GT OC BFG NVInject v0.41 Unkown All resolutions work Yes with patch
256MB
GeForce
7800GTX ASUS NVInject v0.33 Both All Yes with Patch
256MB
GeForce
7900GS NVIDIA Kalyway NVIDIA patch Unknown Not all Need patch from Kalyway
256MB
GeForce
7900GT ASUS Kalyway NVIDIA patch Unknown Not all Need patch from Kalyway
256MB
GeForce
7900GT CO eVGA NVInject QE/CI both work All resolutions work Need to use NVInject
256MB
GeForce
NVInject, Needs Bios Flash, Check here All resolutions work, TV
7900GTO MSI QE/CI both work Need to use NVInject, BIOS flash
(http://nvinject.free.fr/roms.php) for rom. Out untested
512MB
GeForce
eVGA NVInject Unknown All resolutions work Need to use NVInject
7950 512MB
GeForce Needs 4 bytes of bios changed and reflashed. Used this guide Used NVinject 2.0 and followed guide here
All resolutions work (only
7950GT NVIDIA (http://nvinject.free.fr/512Mb.html) and windows nvflash QE/CI both work (http://forum.insanelymac.com/index.php?
60hz working though)
512MB (http://nvinject.free.fr/files/nvflash_for_windows.zip) . showtopic=69855&hl=0295) for kext setup.
GeForce Can use Nvinject or without if you have efi
7950GTOC BFG Needs Bios Flash, Check here (http://nvinject.free.fr/roms.php) for rom. QE/CI both work All resolutions work installed by following guide to create gfx string
512MB here (http://osx86.wikidot.com/how-to-s#toc6)
GeForce
Works with NVinject 0.2.1, NVCAP string with 04000000 00000300
8400GS Gigabyte QE / CI , yes all Resolution , yes all Fully Working with Patch
04000000 00000007 00000000 for DVI.
256MB
GeForce NVinject 0.2.1 here (http://nvinject.free.fr/downloads.php) . EFI GFX
8400GS MSI Strings work following this (http://osx86.wikidot.com/how-to-s#toc6) QE/CI both work All resolutions work No QE/CI without patch
256MB guide.
GeForce Sweex NVinject 0.2.1 QE/CI both work All resolutions work Fully working with patch
8400GS
256MB
No QE/CI without patch (NVinject 0.2.0 during
Kalyway 10.5.2 install)
Right Click
GeForce /System/Library/Extensions/NVInject.kext
8400GS XFX NVinject 0.2.0 during Kalyway 10.5.2 install (choose Nvidia 256MB) QE/CI both work All resolutions work choose "Show Package Contents"
256MB Copy Info.plist to ~/Desktop
Open Info.plist copy with Plist Editor
Replace NVCAP string with 04000000
00000300 04000000 00000007 00000000
Save copy of info.plist and copy back to
NVInject.kext contents
GeForce
8400GS XFX NVinject 0.2.1 here (http://nvinject.free.fr/downloads.php) QE/CI both work All resolutions work No QE/CI without patch
256MB
GeForce
8400GS XFX EFIstring QE/CI both work All resolutions work No
512MB
GeForce
8400GS Club3D NVinject 0.2.0 after Kalyway 10.5.2 install (don't use 0.2.1) QE/CI both work All resolutions work DVI not tested
256MB
GeForce
8400GT eVGA Works with NvInject Unknown All resolutions work Yes
512MB
GeForce Yes, correct widescreen res
8500GT GIGABYTE NvInject 0.2.1 QE/CI both work for analog only with VGA- Yes, with patch
256MB DVI converter.
NX8500GT All resolutions. Dual DVI
MSI Leo4Allv2, NvInject 0.2.1 (256MB) QE/CI both work Yes
MTD256EH with HDMI-DVI cable + DVI
GeForce
8500GT GALAXY NvInject 0.2.1 with 512MB patch QE/CI both work All resolutions work. Yes, with patch
512MB
GeForce
8500GT
Sparkle NvInject 0.2.0 (256MB Recognized) QE/CI both work All resolutions + DVI-I Yes, with patch
512MB
(SILENT)
Display requires driver installation and modification of info.plist to
work at full resolution and with VGA-out. Mirror function still doesn't
work properly, but forces main display to VGA-out.
GeForce
NVidia Save copy of info.plist and copy back to NVInject.kext contents Yes with Driver All Resolutions and VGA- Partial at 1024x768
8600M GS
Change permissions of NVInject: out with Driver
512MB
"sudo rm -R /System/Library/Extensions.mkext
/System/Library/Extensions/Caches/"
GeForce
8600GT
XFX NvInject 0.2.1 (256MB) QE/CI both work All resolutions work Yes With Patch
256MB
FATAL1TY
GeForce
8600GT NVinstaller v.41. It works perfectly on PCIe 16x mobo (but doesn't work All resolutions work + dual
XFX QE/CI both work Yes with NVinstaller v.41
256MB on PCIe 4x mobo like asrock 4coredual-sata2 for instance) screen
Zalman
QE/CI/GL both
work, sleep
GeForce Used bf2loser's guide from here
(standby) works,
8600GT EVGA (http://forum.insanelymac.com/index.php? All resolutions work Yes With Patch (Punk92) + guide (bf2loser)
Dual Monitor
256MB showtopic=82080&st=0#entry724961)
works, no
mirroring
GeForce
8600GT Elsa Gladiac Used 10.5.2 patch Unknown All resolutions work Unknown
256MB
GeForce NVinject 0.2.1. It works perfectly with two LCD or two VGA monitors,
All resolutions work + dual
8600GT Palit both DVI and VGA ports work perfectly, including when using QE/CI both work Yes with NVinject 0.2.1
screen
512MB Palit adapters.
GeForce
8800GS eVGA NVInstaller .41 QE/CI work All Resolutions work Just edit the DeviceIDs in kexts.
384MB
GeForce
8600GT Gainward NVInstaller v.41 QE/CI work All resolutions work Yes, with patch but only 768MB and not 1024MB
1024MB
GeForce Used johnniecarcinogen's NVInstall
8600GT MSI (http://forum.insanelymac.com/index.php?showtopic=83931) 0.33 to QE/CI both work All resolutions work Patch needed
512MB enable full features
GeForce
Working OOB, install NVinject V41 AFTER INSTALL to enable all
8600GT XFX QE/CI both work All resolutions work Patch needed
resolutions and other features.
512MB
GeForce
8600GT XFX NVinject QE/CI both work All resolutions work Yes
256MB XXX
Install in order, and clear kextcache / repair permissions after each
GeForce step:
8600GTS
NVIDIA Leopard Graphics Update 1.0 -> NVInstaller v.41 -> Erase and change QE/CI both work All resolutions work Yes
256MB /
Device IDs (GeForce.kext, NVDANV##Hal.kext, NVDAResman.ext,
512MB
NVinject.kext) to "040010de".
GeForce MSI NVInstaller V.34 here (https://www.mediafire.com/?mi2obzt2ont) Both All Just great!
NX8800GT
512MB
GeForce
8800GT XFX NVinstaller0.33 QE/CI both work All resolutions work Yes, with patch
256MB
GeForce
8800GT ASUS NvInstaller 3.1 Used QE/CI both work All resolutions work Yes, with patch
256MB
GeForce
8800GT Asus Apple graphics update 10.5.2+NV 41. Both All Just great!
512MB
GeForce
NX8800GT MSI NVinject (http://nvinject.free.fr/) QE/CI both work All resolutions work Flawless
512M OC
GeForce
8800GT
Gigabyte NVinject (http://nvinject.free.fr/) QE/CI both work All resolutions Yes
512MB
Turbo
GeForce
8800GT Gigabyte EFI Strings & EFI v8 used. Works after Leopard Graphics Update QE/CI both work All resolutions work
512MB (G92)
eGeForce
Yes, needs NVinject v0.2.1, works post applegfx
8800GT KO eVGA NVInstaller v.33 (NVinject v0.2.1) QE/CI both work All resolutions work
update
512MB (G92)
GeForce
8800GTS NVIDIA Works with BrazilMac QE/CI both work All resolutions work Yes
256MB
GeForce
NVinject here (http://forum.insanelymac.com/index.php?
8800GTS MSI QE/CI both work All resolutions work Needs patch for resolutions and memory detection
showtopic=83931)
320MB
GeForce
NVinject here (http://forum.insanelymac.com/index.php?
8800GTS PNY QE/CI both work All resolutions work Needs patch for resolutions and memory detection
showtopic=83931)
320MB
GeForce
NVinject here (http://forum.insanelymac.com/index.php?
8800GTS EVGA QE/CI both work All resolutions work Needs patch for resolutions and memory detection
showtopic=83931)
320MB
GeForce
8800GTS
XFX NVinject-320 QE/CI both work All resolutions work Yes, I used Kalyway 10.5.2 DVD with NVinject-320
320MB XXX
Edition
GeForce
8800GTS XFX NVinject installer v.33 QE/CI both work All resolutions work No
512MB
GeForce Yes, needs NVinject v0.2.1 and VRAM,totalsize has
8800GTS ASUS NVinject.0.2.1 here (http://nvinject.free.fr/files/Latest_NVinject.0.2.1.zip) QE/CI both work All resolutions work to be set manually in "info.plist" to <00000020> -
512MB (G92) 512Mb
GeForce
Had to add 0x0600 (Device ID) to GeForce
8800GTS eVGA NVinstaller v4.1 QE/CI both work All resolutions work
NVDANV50Hal, NVDAResman, NVinject kexts.
512MB (G92)
Do not use NVinject or NVKush. Follow the
GeForce Edited the kext EFI string detailed in this forum post here
instructions here
8800GTS eVGA (http://forum.insanelymac.com/index.php?showtopic=89001) . (Takes QE/CI both work All resolutions work
(http://forum.insanelymac.com/index.php?
512MB (G92) the kext from the 8800GT gfx card in a Mac Pro.)
showtopic=89001) . Used on a Boot-132 system.
GeForce
All resolutions work (using Yes, just used NVInstaller v0.33, download here:
8800GTS Point of View NVinstaller v0.33 QE/CI both work
1920x1200) http://scottdangel.com/blog/?page_id=20
512MB (G92)
GeForce
8800GTX ASUS NVInject 768MB on Zerpyroths 10.5.2 release Both All Yes w/ NVinject
756MB
GeForce
8800GTX ASUS NVinject 0.2.0 Both All Yes w/ NVinject
756MB (G80)
Nvidia
GeForce
XpertVision NVInstaller v.33 (NVinject v0.2.1) QE/CI both work All resolutions work Yes
8800GT
512MB (G92)
GeForce Installation instruction here
All resolutions work (using
9800GTX Evga GFX Strings Both (http://forum.insanelymac.com/index.php?
1920x1200)
512MB (G92) act=findpost&pid=759844)
All showing in System Best results with GFX Strings method described by
GeForce
Preferences>Display; but aquamac here
9800GTX Leadtek GFX Strings & EFI v.8 Both
only 1680x1050 tested (my (http://aquamac.proboards106.com/index.cgi?
512MB (G92)
LCD native) board=hack1&action=display&thread=509)
nVidia
Patch needed in insanelymac forum (change
Quadro FX All resolution work include
HP Kalyway Release 10.5.2 & NVinject 0.2.0 & Both deviceID in GeForoce.kext, NVIDANV40HAL.kext,
1400 Dual View Display
NVinject.kext)
(128Mb)
..................................................................
Integrated
Hardware
Board- QE /
Name, Notes Resolution Full Work / No Patch
Manufacturer CI
(VRAM)
1280x800 Download these (http://forum.insanelymac.com/index.php?
Working (No artifacts, so far with Sansey's method, drivers edited by Andy),
(Changing showtopic=110176) drivers and install using this
GMA900 Intel but needs external monitor/dongle or wire trick (which is the easiest fix, Both
resolutions (http://forum.insanelymac.com/index.php?showtopic=110176&st=20#)
see this (https://img391.imageshack.us/my.php?image=photo006ab6.jpg) )
work) method (more success rates and nearly no artifacts)
After applying
AppleIntelIntegratedFrameBuffer.kext v1.4.20 for all resolutions
kext update get
GMA950 Intel Working but some minor issues (mouse tearing) Both (http://forum.insanelymac.com/index.php?
only one
showtopic=86609&st=0&p=614934&#entry614934)
resolution
No
GMA3100 Intel Working but fixed at only one resolution QE / 1024x768 No Patch needed
CI
GMAX3100 Intel Working perfectly Yes 1280x800 yes, with Leopard Graphics Update
No
GMAX3500 Intel Working but fixed at only one resolution QE / 1024x768 No Patch needed
CI
..........................
Network Cards
Wireless
Fully Working w/o
Interface Standard Device Manufacturer Notes
Patch
Mini PCI-
802.11/a/b/g/n BCM4322ag(14e4:432b) Broadcom Works w AirPortExtremeUp2008004.dmg from Apple. Yes
e
PCI 802.11b/g/n AEDA1A Broadcom Working desktop adapter by BuildSmart Yes
PCIe X1 802.11a/b/g/n AEDA1B Broadcom Working (270mbps in OS X) desktop adapter by BuildSmart Yes
PCIe X1 802.11a/b/g/n AEDA1C Atheros Working (300mbps in OS X) desktop adapter by BuildSmart Yes
Atheros Chipset, Working using this post (http://forum.insanelymac.com/index.php?
PCI Card 802.11bg ALL0281 Allnet showtopic=40317&start=0&p=472341&#entry472341) (kexts from 10.4.8) Manufacturer ID: 168c Device ID: 0013; No
connect on startup with a small script
Mini PCI Working on Kalyway's
Express 802.11abg AR5BXB6 Atheros Working 10.5.1 with 10.5.2
Card update
PCI 802.11b/g WL-138g v2 ASUS OOB with BCM4318 chipset Yes
PCI Card 802.11b/g F5D7000 Belkin Working with Broadcom 43xx Patch included on Zephyroth DVD. Regular dropouts, cause unconfirmed. With patch
Working with the Tiger 10.4 driver from ralink (22-11-2006/668KB). lspci -nn: 01:09.0 Network controller 0280:
RaLink RT2500 802.11g Cardbus/mini-PCI 1814:0201 (rev 01). This is the older card with the rt2500 chip, only free/WEP/WPA all fine
PCI Card 802.11b/g C54RC/C54Ri (rt2500) Conceptronic
capable of WPA. The newer card has a non osx86 supported rt61 chip (only ppc driver available) and comes with with the rt driver
wpa2 support.
PCI Card 802.11b/g DX-BGDTC Dynex Working with Broadcom 43xx Patch. With patch
For Atheros chip, use this guide [8] (http://forum.insanelymac.com/index.php?
PCI Card 802.11b/g DWL-G510 (rev. A) D-Link No
showtopic=100551&st=0&p=717143&#entry717143)
Atheros AR5005G (dev id: 168c 001a) - works w/iDeneb v1, Atheros wireless fix selected. Atheros.pkg.zip
PCI Card 802.11a/b/g DWL-G510 (rev. B) D-Link No
(https://www.mediafire.com/?vtvrfzdit1p)
AR5213 Chipset. working using this guide (http://forum.insanelymac.com/index.php?
s=&showtopic=40317&view=findpost&p=780131) . remember to first type sudo -s in terminal before entering code
PCI Card 802.11b/g DWL-G520 rev.b D-Link and repair disk permissions afterwards. WPA not working with manual config, but try this guide No
(http://forum.insanelymac.com/index.php?s=&showtopic=40317&view=findpost&p=287826) to get it going (not
tested). used Leo4all v3
Used RT2500 "STA_CardbusPCI" Driver & Utility from Ralink Website - the Tiger version (dated 11-23-2006). Does
No. Requires Driver,
PCI Card 802.11b/g HWP-54G Hawking not show up in System Profiler at all, but works if you disable ("Make Service Inactive") the wired ethernet port
Utility, Settings tweaks.
(en0). Also this was on an unmolested Kalyway 10.5.2 DVD Install.
Works beautifully using the Ralink 10.5 drivers at: [9]
(http://www.ralinktech.com.tw/data/drivers/STA_RT2860%20D-1.0.0.0a%20UI-1.4.8.0_2007_11_26.dmg)
PCI Card 802.11b/g/n EW7728In Edimax No, see notes
Doesn't connect as Airport, and must be configured using the Ralink Utility; configured as ethernet. Occasional
dropouts, but cause unconfirmed. As a side note, this card works perfectly in Vista x64 as well, n-mode all the way!
Wired (Ethernet)
PCI Netgear Gigabit (FA311) Netgear Model: FA311 Chipset: Realtek RTL8139D Working 100% out of the box w/o patch
PCI FNC-0109TX Level One Realtek RTL8139 working out of the box
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sound Cards
Hardware
Name Manufacturer Notes Fully Working w/o Patch
(alphabetical)
ALC883
Realtek Works with ALC883.pkg from JaS 10.5.4 DVD yes
(onboard)
Require AppleHDA Patcher (http://forum.insanelymac.com/index.php?
s=&showtopic=32859) v1.2 and a Linux dump
ALC888 (http://psykopat.free.fr/apple/AppleHDA/sigmatel/)
Realtek No, Need patch
(onboard)
or ALC888audio.mpkg (6 channel and inputs)
ALC888
Used this installer (http://forum.insanelymac.com/index.php?
(onboard -
Realtek act=attach&type=post&id=6739) and it worked quite well. Have not tested optical out or You gotta patch it.
ICH7 Shuttle
audio in. Stereo works with this patch
SG31G2)
ALC888
(nForce 430 No, but using Zephyroth install audio works on first boot, but not set to digital defaul
Realtek ALCinject and ALC888 w/ 3port used on Zephyroth's 10.5.2 DVD
chipset music
onboard)
Onboard Sound. Requires ALCinject and patched AppleHDA
ALC889A Realtek No. Once patched, all in/out working (AZALIA)
(http://forum.insanelymac.com/index.php?showtopic=95910) .
Works with kxAudio Beta driver 1.1b1 under Kalyway 10.5.3 and 10.5.4. Requires [20]
Audigy 2 ZS (http://redirectingat.com/?
Creative Labs Yes output works with patch. Input options are grayed out.
Platinum id=292X457&url=http%3A//download.kxproject.lugosoft.com/downloads/kXAudioDriver-
1.1b1.dmg)
Works with kxAudio Beta driver 1.1b1 under Kalyway 10.5.3 and 10.5.4. Requires [21]
(http://redirectingat.com/?
Audigy 2 Creative Labs Yes output works with patch.
id=292X457&url=http%3A//download.kxproject.lugosoft.com/downloads/kXAudioDriver-
1.1b1.dmg)
SoundBlaster
Creative Labs Doesn't Work No
Live! 24 Bit
Audiophile
M-Audio Doesn't Work - no intel PCI M-Audio drivers (likely due to no real Intel Macs with PCI) No
2496
Audiophile
M-Audio Drivers from M-Audio (http://www.m-audio.com) Yes
USB
AudioFire 4 Echo Audio Works flawlessly with Firewire 400 and 800 connections Yes, with OSX driver from Echo Audio (http://www.echoaudio.com/Downloads/MacOS
Firewire 410 M-Audio Drivers from M-Audio (http://www.m-audio.com) Yes
AureonDUAL
Terratec USB Stick Soundcard. In and output both work perfectly (OOB). No driver needed. Yes
USB
Works out of the box. I took this old card from a bunch of 5 or 6 old sound cards. I tried
COMPAQ
Creative them all and none worked. I was about to give up, but I decided to give this one a try...
Premier Sound Yes
(CT5805) And it Worked!!! If you have an old Compaq Computer with a sound card, see if it has
PCI
one of these sound cards.
SigmaTel 9220 Require sigmatel 9220.pkg, working audio from line out pin
SigmaTel No, need patch
(onboard) Need to repair disc permission after pkg install
SigmaTel 9220 Require sigmatel 9220.pkg, working audio from line out pin
SigmaTel No, need patch
(onboard) Need to repair disc permission after pkg install
.....................................................................................
Other Accessories
Hardware Fully Working w/o
Hardware Name Manufacturer Notes
Type Patch
Wireless
Presenter Works out of the box
Model # 33374 Kensington Yes
with Laser USB interface
Pointer
Remote
Keyspan RF Remote for Works out of the box
Control for Keyspan Yes
Front Row USB interface
Front Row