Professional Documents
Culture Documents
Metering Gear Pumps: Pomtava S.A
Metering Gear Pumps: Pomtava S.A
Metering Gear Pumps: Pomtava S.A
Multicomponents
Group 1
Strong points
• All parts are in tempered stainless steal
• Reduction of “dead zones” allowing for a better
flushing
• New sealing technology combining lip seals and
liquid barrier
• Sealing options quickly interchangeable
• Strong, coated drive shaft, held in place with 2
bearings and a axial thrust
• Centering pins making pump assembly easier and
increasing its accuracy
Technical data
Sealing : Lip seals and liquid barrier
Rotation speed : From 10min-1 to 200min-1, depending on the product involved
Standard rotation : Clockwise rotation (A)
Temperature : Max. 135°C
Output pressure : Max. 100 bars
Input/Output : 2 holes Ø 6mm on the body of the pump. Delivered with connecting
block G1/4’’
Driving shaft diameter : Ø12mm with a 4mm key
Drive shaft height : H=40mm
Available outputs
0.3cc/rev 0.6 cc/rev 1.2cc/rev 1.8cc/rev 2.4cc/rev 3.0cc/rev
Options
• (T2) Entirely treated with ADLC
• (H51) Stand H=51mm compatible with Group 1 and 2
• (Z) Counterclockwise rotation
• (AZ) Clockwise and counterclockwise rotation
• (W) Connecting block I/O G1/4’’ for 2 pressure sensors M28x1.5 or G1/2’’
• (AB38) Connecting block G3/8’’