Professional Documents
Culture Documents
Ecu HW - Nissan ECU RE
Ecu HW - Nissan ECU RE
Ecu hw
type A
SH7058 (probably never SH7058S)
ECUIDs : CF43D (MY06 350Z USDM), 6Z68A (MY03 QG18DE Sentra CAN)
Outside markings :
CF43D: "LP" and "MEC60-122 A1 6331"
ICs
93C66 : EEPROM (256*16bit SPI)
L9762 : all-in-one mess, with voltage regulators, CAN + K transceivers, unknown other stuff
789101 : mask-ROM mcu, seems to be mainly a supervisor / reset controller. See ext
watchdog signal
CS=193CPU (PJ15)
SK=192CPU (PJ14)
DI=191CPU (PJ13)
DO=190 (PJ12)
ORG=VCC ( => EEPROM is wired as 256 * 16bit )
MD2 VCC
MD1 3.3k to MD0/FWE
MD0 : direct connect to FWE
FWE : VCC
K line transceiver is connected to SCI1_TX and _RX pins (165, 166 CPU)
WDT signal : 250Hz (2ms high, 2ms low) is output from cpu pin PL5
TP group A:
1,2 VBat
3,4 GND
5 +5V
6 N/C ?
TP group B:
162CPU (PB14) = ?
55CPU (MD1)
pix
"type A" PCB, ECUID=CF43D
type B
Seems to be a more compact PCB ? And the mcu is mounted 180deg when compared with
type A ECUs.
SH7055
Outside markings :
EQ910: ?
ICs
pix
"type B" PCB; ECUID=EQ910
type C
Probably same size PCB as type A. "upside down" mcu, like type B.
SH7058
Outside markings :
ZD89A: "63" and "MEC85-521 A1 5913"
ICs
pix
"type C" PCB; ECUID=ZD89A
type D
SH7055 0.18μ
pix
Open images at full size to see IC definitions and connection pad names
EC87A, top
EC87A, bottom
ICs
ECU dissasembling confirmed findings in disassembly of the ROMs indicating that the
EEPROM is on PORTC, unlike the types A,B,C:
CK - SCK2 (pin 164)
DI - TXD2 (pin 167)
DO - RXD2 (pin 168)
CS - PC4 (pin 169)
as observed by Shuher @ RR based on EC87A disasm. Note that the code uses the SCI2
peripheral instead of bitbanging the SPI proto.
ECU pinout
Inputs:
ECU pin CPU port (SH7055) Signal Description
Outputs:
type F
SH7055 0.35μ
pix
AU40B, top
AU40B, bottom
ICs
EEPROM:
ECU pinout
misc types
Some other PCB examples that are not similar enough to other types to fit in their categories.
Some of these probably deserve their own "type" section when someone documents them
enough.
Altima 2011, 9HA7A/9HA7D
Dual-microcontroller types
type E
Two SH7051 mcus
Outside markings :
AG920 (Y34 Gloria) : Q2, A56-M43 N01 9716 , UNISIA JECS
2Y967 (A33 Maxima MY00): AB, A56-P35 Z46 9X22, UNISIA JECS
ICs
One or two 93C56 EEPROMs
pics
ECU pinout
These pinouts are verified on 2Y967 (00 Maxima) and 4M860 (01
Sentra)
43 IGN
106, 108 ECM GND
110, 112 ECM B+
115 K line
Retrieved from
"https://nissanecu.miraheze.org/w/index.php?
title=Ecu_hw&oldid=419"