Professional Documents
Culture Documents
Inline Inductor MI-80, MI-100, and MI-150: Description
Inline Inductor MI-80, MI-100, and MI-150: Description
Inline Inductor
MI-80, MI-100, and MI-150
Description
The stationary inline inductor injects foam agent into a water
stream. The inductor can handle high counter pressures,
allowing a long distance from the injection point to the foam
applicator.
Application
E000501
An inline inductor is designed for use in fixed flow foam
systems such as low, medium, and high-expansion foam
systems, water and foam deluge systems, and monitors.
Capacity Range for Inline Inductors
13,000
Product Features
L
ight weight corrosion resistant all stainless steel construc-
n 10,000
tion with hot-dipped galvanized slip-on flanges
Factory calibrated to any flow and pressure in the range
n
Connections 1,000
MI-40/65
Water/Foam inlet: flanged to fit DIN PN16 or ANSI 150 lb
n
MI-40/50
Lpm
Factory calibrated to any flow and pressure in the range
n MI-40 P
500
Connections
400
n Foam inlet ball valve: screw threaded BSP Female
MI-25/40 F
Listings and Approvals 200 MI-25 P
n Russian Maritime Register of Shipping (RMRS)
Installation 100
n A minimum of five nominal pipe diameters of straight pipe
upstream and downstream of the inline inductor shall be
used.
50
5 6 7 8 9 10 11 12 13 14 15 16
bar
Note: 6% induction is not available for all flows. See the Technical Data
table.
Tyco Park | Grimshaw Lane | Newton Heath | Manchester | M40 2WL | Tel: +44 (0) 161 259 4000 | www.skum.com
© 2019 Johnson Controls. All rights reserved. All specifications and other information shown were current as of document
revision date and are subject to change without notice. | Form No. FDS-2016045-02
MI-80 F, MI-100 F, and MI-150 F Ordering Information
When ordering, specify the following information:
A
n Part number
Flow (Lpm)
n
Pressure (bar)
n