Professional Documents
Culture Documents
Manual de Fabrica Estufa A Pellet
Manual de Fabrica Estufa A Pellet
number
This is the combustion’s speed during P1 period. If the flame is yellow, laser,
you should increase by press , if too much air, you have to reduce by press
This is the auger motor’s operation time during P1 period. For example, above, the auger
motor, works 3 second and stop 5 second.
This is the first time feeding,auger motor’s operation time during stove start period.
For above , it means feeding 2seconds and stop 7 seconds ,then repeat .when user put
wood pellet ,which is shorter than 2-3CM, normally should reduce the
feeding time or Longer than 2-3cm, normally should increase the feeding time.
You can check how many hours the stove has run.
If you change the data and save as defaults , then press the “Yes” , otherwise, select No.
If you press ‘yes’ , then will can’t back factory setting.
You can modify the password.