Professional Documents
Culture Documents
Tle 9 Css q3 Week 5
Tle 9 Css q3 Week 5
Tle 9 Css q3 Week 5
SUPPLEMENTARY
LEARNING MATERIALS
Learners
1
LEARNING COMPETENCY:
LO 1. Plan and prepare for termination/connection of electrical
wiring/electronics circuits.
TLE_IACSS9-12TCEW-IIIe-f-21
EXPECTATIONS
At the end of the module, you should be able to:
1. identify materials according to specifications and tasks;
2. select appropriate tools and equipment according to task requirements; and
3. follow planned task to ensure OHS guidelines and procedures.
2
PRETEST
Directions: Choose only the letter of the correct answer and write it on the space provided
before each number.
___1. It is essentially an array of ports in a panel.
A. Catch B. Dutch C. Lush D. Patch
___2. LAN stands for what phrase?
A. Local Area Network C. Lock Area Network
B. Land Area Network D. Level Area Network
___3. Who developed a LAN technology that defines a system for connecting computers?
A. Rox Oxford C. Leonardo Da Vinci
B. Robert Metcalfe D. Albert Einstein
___4. It is the most popular cable in creating an ethernet cable.
A. ADC B. GHX C. MAL D. UTP
___5. Where and when did Ethernet discovered?
A. Hall PARC in 1976 C. Just ZARC in 1976
B. Xerox PARC in 1976 D. ZARC Land in 1976
___6. Which material is a type of twisted-pair cable that is used in structured cabling for
computer networks such as Ethernet?
A. Crimping Tool B. Lan Tester C. UTP D. Stripper
___7. Which material is an 8-pin standardized physical network interface for connecting
telecommunications or data equipment?
A. B. C. D.
___8. Which tool is a small, hand-held device used to cut the electrical insulation from
electric wires?
A. RJ45 B. Stripper C. Lan tester D. Crimping tool
3
___9. Which tool is designed to crimp or attach a connector to the end of a cable?
A. B. C. D.
___10. Which tool is an electronic device used to verify the correct wiring of connectors
on the cable?
A. Stripper B. RJ45 C. Lan tester D. UTP
LOOKING BACK
Directions: Write a brief description in each word/s under maintenance of hand tools.
(2 pts. each)
1. CLEANING ____________________________________________
___________________________________________________________
2. LUBRICATING ____________________________________________
___________________________________________________________
3. TIGHTENING ____________________________________________
___________________________________________________________
4. SHARPENING ____________________________________________
___________________________________________________________
___________________________________________________________
4
BRIEF INTRODUCTION
NETWORK CABLING
Also called as LAN Cabling or Ethernet Cabling
• It is the standard for connecting computers and devices to a LAN.
• ETHERNET is a LAN technology that defines a system for connecting computers
in a LAN and was developed by Robert Metcalfe at Xerox PARC in 1976.
• It can use Coax, UTP, and Fiber-Optic Cables.
• But UTP cable is the most popular choice in creating an Ethernet cable. The
Unshielded Twisted Pair (UTP) Cable
• It is a popular choice creating an Ethernet cable. A UTP Ethernet cable uses
TIA/E|A-568 pin/air assignments.
• These assignments are named T568A and T568B. T568A and T5688 wiring
schemes define the pinout, or
• Order of connections, for wires in eight-pin modular connector plugs, and jacks
such as RJ-45.
5
PATCH CABLES
Straight-Through Ethernet Cable are used to connect devices of different types,
such as a computer to a router.
Cross-Over Ethernet Cable are used to connect devices of the same types, such
as a computer to computer.
TOOLS & MATERIALS
1. UTP Cable Category 5e is a type of twisted-pair cable that is used
in structured cabling for computer networks such as Ethernet.
ACTIVITIES
Directions: In a short bond paper, draw and label the tools and materials needed in
network cabling.
Materials:
1. Bond paper (8.5in x 11in)
2. Pencil
3. Coloring materials
6
Here is the scoring rubric for your accomplished task.
Criteria Points Score
Preciseness 5
Creativity 5
Neatness 5
Total 15
REMEMBER
Occupational Health and Safety (OHS)
• Be careful with tools.
• Do not use excessive force if things do not quite slip into place.
• Clean the area before and after using it to maintain sanitation and prevent
accidents.
• Make sure that the pins are properly aligned.
Directions: Write “TRUE” if the statement is correct, otherwise write “FALSE” on the
space provided before each number.
________3. Straight-Through Ethernet Cable are used to connect devices of the same
types, such as a computer to a router.
________4. Each port of patch panels connects, via a patch cable, to another port located
elsewhere in your building.
________5. Cross-Over Ethernet Cable are used to connect devices of different types,
such as a computer to computer.
7
POST TEST
Directions: Choose only the letter of the correct answer and write it on the
space before each number.
___1. LAN stands for what phrase?
A. B. C. D.
___3. It is the most popular cable in creating an ethernet cable.
A. ADC B. GHX C. MAL D. UTP
___4. Which material is an 8-pin standardized physical network interface for connecting
telecommunications or data equipment?
A. B. C. D.
___5. Which material is a type of twisted-pair cable that is used in structured cabling for
computer networks such as Ethernet?
A. Crimping Tool B. Lan Tester C. UTP D. Stripper
___6. Where and when did Ethernet discovered?
A. Hall PARC in 1976 C. Just ZARC in 1976
B. Xerox PARC in 1976 D. ZARC Land in 1976
___7. Which tool is a small, hand-held device used to cut the electrical insulation from
electric wires?
A. RJ45 B. Stripper C. Lan tester D. Crimping tool
___8. Who developed a LAN technology that defines a system for connecting computers?
A. Rox Oxford C. Leonardo Da Vinci
B. Robert Metcalfe D. Albert Einstein
8
___9. Which tool is an electronic device used to verify the correct wiring of connectors on
the cable?
A. Stripper B. RJ45 C. Lan tester D. UTP
___10. It is essentially an array of ports in a panel.
A. Catch B. Dutch C. Lush D. Patch
REFERENCES
Firefold. (n.d.). What is a Patch Panel and What Is Its Purpose? Firefold.Com. Retrieved
January 25, 2021, from https://www.firefold.com/blogs/news/what-is-a-patch-
paneland-what-is-its-purpose.
Navarro, R. T., Jr. (2019). Network Cabling-Computer Network Concept [PPT].
Parañaque City: Navarro.
Prepared by: