Professional Documents
Culture Documents
MyCESMM2 (April 2018)
MyCESMM2 (April 2018)
ENGINEERING STANDARD
METHOD OF MEASUREMENT
SECOND EDITION
MyCESMM2
© Copyright 2018
PAGE
Committee representation ii
Foreword iii
Introduction iv
Bibliography 161
Acknowledgements 163
Malaysian Civil Engineering
Standard Method of Measurement ̵ Second Edition
(MyCESMM2) COMMITTEE REPRESENTATION
COMMITTEE
REPRESENTATION
The Working Group on Malaysian Civil Engineering Standard Method
of Measurement Second Edition also known as MyCESMM2 which
developed this document was managed by the Construction Industry
Development Board Malaysia (CIDB) and consists of representatives
from the following organisations:
ii | MyCESMM2
FOREWORD
FOREWORD
This Malaysian Civil Engineering Standard Method of Measurement Second Edition (MyCESMM2) was
developed by the Working Group under the authority of the Industry Standards Committee on Building,
Construction and Civil Engineering. Development of this standard was carried out by the Construction
Industry Development Board Malaysia which is the Standards-Writing Organisation (SWO) appointed by
SIRIM Berhad to develop standards for construction practices.
In developing this MyCESMM2, reference was made to the Malaysian Standard Civil Engineering Standard
Method of Measurement (MSCESMM) (JSM, 2018) and Malaysian Civil Engineering Standard Method of
Measurement (MyCESMM) (CIDB (M) 2011).
Compliance with a Malaysian Standard does not in itself confer immunity from legal obligations.
MyCESMM2 | iii
Malaysian Civil Engineering
Standard Method of Measurement ̵ Second Edition
(MyCESMM2) INTRODUCTION
INTRODUCTION
MyCESMM2 has been designed to cater for various aspects of local construction practices and is
published to accommodate a comprehensive coverage of civil engineering work in Malaysia.
There are 3 other publications which have been published to complement this MyCESMM2 in order to
provide detail clarification of the work items and to assist measurers in simplifying their tasks when
describing the work items.
a) The Malaysian Standard Method of Measurement in Civil Engineering Works (MSCESMM) (JSM, 2018).
b) ‘Guide to MyCESMM2’ which offers detail technical clarifications on work items found in MSCESMM and
MyCESMM2.
c) ‘Library of Standard BQ Descriptions for MyCESMM2’ which contains a comprehensive option of list of
descriptions of work items from which measurers can extract to facilitate efficiency in the preparation
of the bill of quantities.
iv | MyCESMM2
SECTION 1 - SECTION 6
Brief on contents in MSCESMM – There are 6 sections in MSCESMM (JSM, 2018) and they are briefly described below:
This section defines the scope, normative references, terms and definations, abbreviations and units as described
in MSCESMM (JSM, 2018).
This section explain about item description, modes of description, separate items, units of measurement,
measurement rule, definition rules, coverage rules, additional description rules and application of rules as described
in MSCESMM (JSM, 2018).
This section explain about coding, item numbers, coding of unclassified items and numbering of items with additional
description as described in MSCESMM (JSM, 2018).
This section explain purpose of the bill of quantities, measurement of completed work, sections of the bill of quantities,
preamble, work items, division of the bill of quantities into parts, daywork schedule, heading, sub-headings, extent
of itemisation, descriptions, ranges of dimensions, prime cost items, provisional sums, quantities, work affected by
water, form, setting and grand summary as described in MSCESMM (JSM, 2018).
This section explains insertation of rates, prices and parts to be totalled as described in MSCESMM (JSM, 2018).
This section described method-related charges, insertation by a tenderer, intemisation, description, contractor shall
not be bound to adopt method, charges shall not be measured and payment as described in MSCESMM (JSM, 2018).
MyCESMM2 | 1
Malaysian Civil Engineering
Standard Method of Measurement ̵ Second Edition
(MyCESMM2) SECTION 7
Work classification is in MyCESMM2 and consisted of 23 classes of work classification commonly encountered in a
civil engineering contract are as follows:
Class F : Earthworks
Class L : Metalwork
Class O : Pipework
2 | MyCESMM2
CLASS A
GENERAL ITEMS
MyCESMM2 | 3
4
ADDITIONAL
CLASS A: GENERAL ITEMS MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
| MyCESMM2
(MyCESMM2)
Geotechnical work, and Class H: Piling work). quantity shall be given for establishment,
Temporary road diversion (included in Class C: Traffic management and control against all items for maintenance and
Malaysian Civil Engineering
MyCESMM2 |
in the contract.
5
CLASS A: GENERAL ITEMS
6
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
3 Project 1 Survey and setting sum A10
requirements out Item description for
survey and setting
out shall state type of
surveys and when
| MyCESMM2
(MyCESMM2)
licensed surveyor is
required to carry out
Malaysian Civil Engineering
the work.
2 Quality assurance/ 1 QA/QC plan sum M7 D3 C5 A11
Quality control 2 Testing of materials sum Items shall be given in Testing and Testing and Item description for
3 Testing of works sum this class for all testing commissioning shall commissioning shall factory acceptance
4 Factory acceptance sum for which items are be performed and be deemed to comply test shall state the
test separately as set out in fulfilled in accordance with the requirements material to be tested,
5 Testing and sum other classes. with relevant as expressly stated. type of test, and the
commissioning authorities/ employer number of person to
requirements/ witness the test.
Standard Method of Measurement ̵ Second Edition
specification.
A12
D4 Item description
Testing and for testing and
commissioning commissioning of plant
shall include man shall state the duration
hours, mobilisation, in months
demobilisation,
competent personnel, A13
specific tools and all Item description for
other required items to testing of the works
operate fully functional. shall state particulars
of samples and of the
methods of testing.
A14
Item description
for testing and
commissioning shall
state the material to be
tested and type of test.
3 Operation and 1 Operation and sum D5 A15
maintenance of maintenance The operation and Item description
plant manual maintenance of plant for operation and
2 Training of operating sum only applies to work maintenance of
personnel where the process plant shall state the
3 Provision of sum plant is required to be sequence/interval,
manpower tested. type, requirement and
4 Provision of chemicals sum duration in month.
and consumables
5 Utility cost sum
CLASS A: GENERAL ITEMS
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
3 Project D6 A16
requirements Training shall include Item description for
all training materials, training of operating
manhours, mobilisation, personnel shall state
demobilisation, the duration of training.
competent personnel,
specific tools,
accommodation and all
other required items to
complete the training.
D7
Operation and
maintenance manual
shall include all
operational manual
material,
man hours, competent
personnel, and all
other required items to
complete the operation
and maintenance
manual for the training.
C7
Items for care of works
shall be deemed to
include providing
security services,
payment of all the
utilities charges and
maintain existing
facilities.
MyCESMM2 |
7
CLASS A: GENERAL ITEMS
8
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
3 Project 5 Maintenance of 1 Routine sum D9 C8 A17
requirements road maintenance – Maintenance of road Routine and periodic Item description for
existing road shall be as defined maintenance shall be maintenance of road
2 Periodic sum in the standard deemed to comply shall state the type of
maintenance – specification for road with the requirements maintenance required.
| MyCESMM2
(MyCESMM2)
maintenance – D10
temporary Routine maintenance is
road diversion the road maintenance
4 Periodic sum works which include
maintenance – pothole patching, drain
temporary cleaning, grass cutting,
road diversion road sweeping, and
other ancillary work.
D11
Standard Method of Measurement ̵ Second Edition
Periodic maintenance
refers to the
resurfacing work
required to be done
for the duration or
period as stated in the
contract.
6 Clearance of sum C9
site upon Clearance of site upon
completion completion shall be
deemed to include
making good all
affected works.
7 Temporary vworks 1 Traffic diversion sum D12 C10 A18
2 Traffic regulation sum Item traffic diversion is Traffic diversion shall Item description for
3 Access roads sum diversion of traffic on be deemed to include de-watering shall state
4 Bridges sum existing road. temporary road controlled de-watering
5 Cofferdams sum diversion. when required.
6 Pumping sum
7 De-watering sum
8 Compressed air sum
for tunnelling
MyCESMM2 |
6 Hardstanding sum
9
CLASS A: GENERAL ITEMS
10
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
5 Contractor 4 Services 1 Electricity sum
requirements 2 Water sum
3 Sanitary facilities sum
4 Hoardings sum
5 Site transport sum
| MyCESMM2
(MyCESMM2)
6 Security sum
7 Other services sum
Malaysian Civil Engineering
MyCESMM2 | 11
12
ADDITIONAL
CLASS B: ENVIRONMENTAL PROTECTION AND ENHANCEMENT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
| MyCESMM2
(MyCESMM2)
Geotextile and geogrid items (included in Class G: Geotechnical work). description. monitoring report and
Bio-degradable erosion control blanket (included in Class F: Earthworks). environmental audit
Malaysian Civil Engineering
specialists registered
with DOE required
for carrying out the
respective survey and
the preparation of the
said survey report.
C2
Item for appointment
of environmental
officer shall be deemed
to include appointment
of qualified and
experienced officer.
C4 A4
Items for gabion wall Item description for
and rock check dam sand bag shall state
shall be deemed to type and size.
include excavation and
other requirements as
expressly stated.
6 Sediment basin 1 Excavation m3 D4 C5 A5
7 Silt trap 2 Granular filling m3 Requirements of Items for granular Items description for
3 Concrete m3 sediment basin and filling shall be deemed concrete shall state the
4 Reinforced m silt trap shall be in to include imported fill grade and type.
concrete pipe accordance with MSMA as expressly required.
5 Rock-filled gabion m3 and as specified. A6
6 Rock-filled gabion m3 C6 Items description for
mattress D5 Items for concrete reinforced concrete
7 Riprap m2 Gabions filled with shall be deemed to pipe shall state the
rocks exceeding 300 include formwork and diameter and class.
mm high shall be reinforcement.
classed as rock-filled A7
gabion and those not Item description for
exceeding 300 mm rock-filled gabion and
high as rock-filled rock-filled gabion
gabion mattress. Filling mattress shall state
shall be deemed to material type and wire
be imported, unless gauge size.
otherwise stated.
A8
MyCESMM2 |
Item description for
rock-filled gabion
13
CLASS B: ENVIRONMENTAL PROTECTION AND ENHANCEMENT
| MyCESMM2
(MyCESMM2)
deemed to include
disposal of accumulated
debris, sediment and
silt to approved site,
and all associated
works as expressly
required.
3 Water quality 1 Skid tank bund sum M2 D6 C8 A9
control and 2 Water treatment sum Water treatment and Water treatment Items for skid tank Item description for
Standard Method of Measurement ̵ Second Edition
monitoring facilities sewage treatment facilities are used bund shall be deemed skid tank bund shall
3 Sewage treatment sum facilities shall only be to treat effluent to include traps, oil state the intended
facilities measured where it is produced by the work and grease separators, location, material and
expressly required. processes in the work and its maintenance principal dimensions.
that are required to and removal upon
be discharged off the completion.
site to comply with the
Environmental Quality
Act.
D7
Waste water treatment
facilities is used to
treat sewage from the
contractor’s workmen
accommodation.
A12
Item description for
sewage and effluent
testing shall state
the parameters
and as required
by the regulatory
requirements.
4 Air quality control 1 Tyre washing set C11 A13
and monitoring facilities Items for tyre washing Item description for
2 Wash trough nr facilities shall be tyre washing facilities
3 Water bowser truck nr deemed to include shall state type and
4 Water sprinkler sum construction of tyre equipment required.
washing concrete
platform and provision A14
and maintenance of Item description for
water supply system wash trough shall
and portable water jets. state the material and
principal dimensions.
C12
Items for water bowser A15
truck shall be deemed Item description
to include the provision for water bowser
and maintenance of truck shall state the
the vehicle, water minimum number of
supply, and driver. water spraying per day.
C13 A16
Items for water sprinkler Item description for
shall be deemed to water sprinkler shall
include provision and state the type, location
maintenance of water and equipment
supply. required.
5 Air quality sampling 1 Total suspended nr C14 A17
particulates Air quality sampling Item description
2 Wind velocity and nr shall be deemed to for air quality
direction include testing by sampling shall state
3 Particulate matter nr
MyCESMM2 |
accredited laboratory. the air parameters,
interval and type
testing including the
15
CLASS B: ENVIRONMENTAL PROTECTION AND ENHANCEMENT
sampling location.
16
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
5 Noise and vibration 1 Noise barrier m M4 C15 A18
control and 2 Vibration control sum Measurement for Items for noise Item description for
monitoring item of noise barrier barrier shall be noise barrier shall
shall be the exposed deemed to include state the height,
| MyCESMM2
plain surface area on supply, fabrication, type, material and
(MyCESMM2)
D14 C21
Organic matter Items for bio-solid
including forest and waste shall be deemed
agricultural waste to include collection,
generated from site composting temporary
clearing activities shall storage area,
be classed as biomass. transportation and
haulage to designated
D15 locations.
Bio-solid waste
is treated sewage
sludge converted to
soil conditioner for
agricultural purposes.
MyCESMM2 |
17
CLASS B: ENVIRONMENTAL PROTECTION AND ENHANCEMENT
18
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
7 Conservation/ 1 Preservation of 1 Flora survey report sum D16 C22 A21
Preservation flora 2 Relocation of flora nr Flora survey report is a Items for the relocation Item description for
to approved sites document identifying of flora shall be the flora survey report
3 Relocation of flora nr the flora species and deemed to include shall state the number
to arboreta their distribution, in the cost of relocation or sets of documents
| MyCESMM2
(MyCESMM2)
MyCESMM2 |
19
CLASS B: ENVIRONMENTAL PROTECTION AND ENHANCEMENT
Malaysian Civil Engineering
Standard Method of Measurement ̵ Second Edition
(MyCESMM2)
20 | MyCESMM2
CLASS C
TRAFFIC
MANAGEMENT
AND CONTROL
MyCESMM2 | 21
22
ADDITIONAL
CLASS C: TRAFFIC MANAGEMENT AND CONTROL MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
| MyCESMM2
(MyCESMM2)
measured separately proposed strategy any survey required, format of the report.
under their respective and procedure to literature, references,
Malaysian Civil Engineering
C5 A4
The supply of Item description heavy
temporary road duty PVC barrier shall
furniture shall be state to be filled with
deemed to include water or sand.
base preparation, cost
of material, fabrication,
and fixing including
posts, struts, bolts and
nuts, base, storage and
transportation.
3 Delineators 1 Cones nr M4 D6 C6 A5
2 String delineators m Area measurement Heavy duty water/ Installation of Item description
3 Flashing arrows nr for chevron markings sand filled PVC temporary road for barriers and
4 Beacon lights nr shall be the gross barrier shall include furniture shall be barricades shall state
5 Blinkers nr area. plastic hoarding deemed to include the type, material,
6 Delineator strip nr where expressly cost for multiple dimensions and
required. shifting within whether fixed or
the contractual portable.
D7 boundaries and
Super cones shall its vicinities that is A6
be classed as cones affected by the traffic Item description for
where expressly management plan. super cones shall
required. state the materials,
size and shape
MyCESMM2 |
including fixed or
portable.
23
CLASS C: TRAFFIC MANAGEMENT AND CONTROL
24
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
2 Temporary road 4 Temporary road 1 Letters and shapes nr C7 A7
furniture markings 2 Continuous line m Temporary road Item description for
3 Intermittent line m furniture shall be delineators shall state
4 Chevron marking m2 deemed to include the type, material and
5 Transverse bars m2 cost for the inspection, dimensions.
| MyCESMM2
(MyCESMM2)
immediate repair
and replacement
Malaysian Civil Engineering
of any damaged,
missing or stolen
items throughout
the duration of
the construction,
and removal upon
completion.
5 Mechanical robot nr C8 A8
Standard Method of Measurement ̵ Second Edition
MyCESMM2 | 25
26
ADDITIONAL
CLASS D: SITE INVESTIGATION WORK MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
| MyCESMM2
(MyCESMM2)
Mobilisation and boring for piling (included in Class H: Piling work). commencing surface as position to the next erecting from one A2
Survey and setting out (included in Class A: General items). follows: position. position to another. Item description for
Malaysian Civil Engineering
deemed to include A4
daily field records Item description for
and sample logging site investigation work
in accordance with shall state the category
relevant codes of of land.
practice.
MyCESMM2 |
27
CLASS D: SITE INVESTIGATION WORK
28
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
4 Miscellaneous test 1 Hand auger 1 Augering in soil m C9 A10
2 Disturbed sample nr Miscellaneous tests Item description for
3 Undisturbed nr shall be deemed miscellaneous test
samples using thin to include plant shall state special
wall tube sampler movements on the site. preparation for
| MyCESMM2
(MyCESMM2)
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
6 Laboratory tests 1 Classification 1 Moisture content nr D5 C12 A15
2 Atterberg’s limits. set A set, for soil strength Laboratory tests Item description for
3 Specific gravity nr tests, shall be defined shall be deemed to laboratory tests shall
4 Particle size nr as of three specimens; include preparation of state the method
distribution for fine except for unconfined specimens. of testing and the
grained soils compresssive test shall standard requirements.
5 Particle size nr be defined as of two C13
distribution for specimens. Special preparation A16
coarse grained soils for equipment shall be Item description for
2 Soil strength 1 Unconfined set deemed to be provided soil strength tests
compressive strength separately when shall state the size of
2 Unconsolidated set expressly stated. testing specimen and
undrained triaxial type of soil sample,
compression i.e. undisturbed or
3 Consolidated set remoulded.
undrained triaxial
compression test A17
with pore water Item description for
pressure direct shear box and
measurement multi reversal shear
4 Consolidated set box tests shall state
drained triaxial the size of the shear
compression test box.
with pore water
pressure
measurement
5 Direct shear box set
6 Multi reversal shear set
box
3 Soil compaction 1 Standard compaction set D6 C14 A18
related (2.5 kg hammer) A set, for soil CBR test shall be Item description for
2 Heavy compaction set compaction related deemed to be carried contaminants shall
(4.5 kg hammer) test, shall be defined as out on both ends of state the standard
3 Vibrating hammer set of five specimen tests each specimen, unless requirements and the
4 Unsoaked CBR nr from the same bulk otherwise stated. contaminants to be
5 Soaked CBR nr sample. analysed.
4 Chemical and 1 Organic matter nr
electro-chemical content
2 Loss on ignition nr
3 Total sulphate nr
content
4 Sulphate content nr
5 Chloride content nr
6 pH value nr
7 Resistivity test nr
8 Contaminants nr
MyCESMM2 |
29
CLASS D: SITE INVESTIGATION WORK
30
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
6 Laboratory tests 5 Rock strength 1 Unconfined nr
compressive
strength
2 Unconfined nr
compressive
| MyCESMM2
(MyCESMM2)
strength with
Young’s Modulus
Malaysian Civil Engineering
3 Fixed head nr
permeability
7 Geophysical survey 1 Seismic refraction 1 Setting out sum M2 D7 C15 A19
and mapping survey 2 Installation and spread Intervals of geophones A spread of installation Setting out for seismic tem description
2 Multi-channel readings for seismic refraction and readings shall refraction survey, for installation and
analysis 3 Preparation of sum survey and multi- include a 24-channel multi-channel analysis readings for seismic
of surface wave bedrock and soil channel analysis of seismograph with of surface wave and refraction survey and
(MASW) contour maps surface wave shall be geophones at not more resistivity profiling multi-channel analysis
measured along the than 5-metre intervals shall be deemed of surface wave shall
3 Parallel seismic 1 Setting out sum
slope. for seismic refraction to include survey state the interval of
logging 2 Installation and point
survey and not more coordinates, reduced geophones, number of
readings
than 3-metre intervals levels and topographic shots per set and the
3 Preparation of sum
for multi-channel profile for each set type of shots required.
subsurface
analysis of surface of installation and
profiles
wave survey. readings. A20
Item description
for installation and
readings for resistivity
profiling shall state the
type of configuration,
number, and interval of
electrodes required.
C18
Items for geophysical
survey and mapping
report shall be
deemed to include
geological sections and
interpretations of data
by specialists.
MyCESMM2 |
31
CLASS D: SITE INVESTIGATION WORK
Malaysian Civil Engineering
Standard Method of Measurement ̵ Second Edition
(MyCESMM2)
32 | MyCESMM2
CLASS E
DEMOLITION AND
SITE CLEARANCE
MyCESMM2 | 33
34
ADDITIONAL
CLASS E: DEMOLITION AND SITE CLEARANCE MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
| MyCESMM2
(MyCESMM2)
Dismantling of rail track (included in Class T: Rail track). of all articles, objects, materials arising and of the employer shall
and obstructions stating disposal area be stated as well as
Removal of existing pipeline below ground level not exceeding 300 mm
Malaysian Civil Engineering
MyCESMM2 |
35
CLASS E: DEMOLITION AND SITE CLEARANCE
36
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
6 Equipment and 1 Disposed off sum A8
accessories 2 Dismantle and sum Item description
refurbishment for equipment and
3 Dismantle and sum accessories shall
reinstall state the principal
| MyCESMM2
(MyCESMM2)
dimensions.
Malaysian Civil Engineering
Standard Method of Measurement ̵ Second Edition
MyCESMM2 | 37
38
ADDITIONAL
CLASS F: EARTHWORKS MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
| MyCESMM2
(MyCESMM2)
Excavation and backfill for drain and pipe in trenches (included in drawings with no artificial hard material unless otherwise item of work involving
Class O: Pipework and Class Q: Drainage work). allowance for bulking, or unsuitable material, stated. excavation for which
Malaysian Civil Engineering
A6
Item description for
stripping shall state
the thickness of
excavation.
2 Cut to fill 1 Earth m3 M7 D8 C4 A7
3 Cut and dispose 2 Natural hard m3 Item classed as Excavation to form Items classified as Item description for
material excavation to remove a profile expressly excavation in cut shall excavation in cut
3 Rock m3 unsuitable material required shall be be deemed to include shall state, where
4 Artificial hard m3 shall be measured, classed as cut. transportation from expressly required,
material irrespective of the source to place of fill or the excavation to be
5 Unsuitable material m3 method of excavation D9 disposal. carried out manually.
6 Hazardous materials m3 adopted by the Excavation in or under
contractor. an embankment, C5 A8
executed prior to Items classified as Item description for
placing of the fill, excavation in cut excavation in cut
shall be classed as shall be deemed to for rock shall state
excavation in cut. include the trimming any requirement for
and preparation of controlled blasting and
excavated surface. pre-splitting.
MyCESMM2 |
39
CLASS F: EARTHWORKS
40
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
1 Excavation M8 D10 A9
The volume of disposal Hazardous material Item description for
of excavated material shall include any hazardous material
measured shall be the material whose shall state the nature of
difference between excavation and the material.
| MyCESMM2
(MyCESMM2)
Disposal of excavated
material shall be
deemed to be disposal
off the site unless
otherwise stated in
item descriptions.
A13
Maximum depth
of excavation for
foundation shall be so
described in the item
description.
CLASS F: EARTHWORKS
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
1 Excavation 5 Under water m3 M10 C7 A14
Measurement of Items for excavation Item description for
excavation under under water shall be excavation under water
water shall be made deemed to include all shall identify the water
from soundings, unless necessary temporary body and the limit of
otherwise stated. work. excavation.
M11
The volume measured
for excavation below
a body of open water
shall be the nett
volume of excavation
commencing from
firm ground level such
as river or sea bed as
shown on the drawing
to which reference is
given in the preamble
in accordance with
4.14.
M12
Item classed as
excavation under water
shall be measured,
irrespective of the
method of excavation
adopted by the
contractor.
M14 C9
Measurement of Items classified as
dredging shall be made excavation by dredging
from sounding, unless shall be deemed to
otherwise stated. include transportation
from source to disposal
site.
MyCESMM2 |
41
CLASS F: EARTHWORKS
42
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
1 Excavation M15 C10 A15
The volume measured Items coverage for Item description for
for dredging below a dredging shall be dredging shall state
body of open water deemed to include the location and limits
shall be the net any mopping up of silt of dredging.
| MyCESMM2
(MyCESMM2)
M16
Dredging to remove
silt shall be measured
Standard Method of Measurement ̵ Second Edition
M18
The volume measured
for double handling
of excavated material
shall be that of the
void formed in the
temporary stockpile
from which the
materials are removed.
M20
The area measured
for timber or metal
supports left-in shall be
the area of supported
surface for which the
supports are expressly
CLASS F: EARTHWORKS
required to be left-in.
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
3 Filling 1 General 1 Excavated material m3 M21 D13 C11 A17
2 Embankments 2 Imported material m3 All filling shall be Excavated material Items for filling shall Item description for
3 Replacement 3 Mass concrete m3 measured nett. shall be deemed to be deemed to include filling using imported
4 To structure 4 Other stated m3 Excavation after be from cut, or from filling in layers and material and excavated
5 To stated depth or material “filling” shall only be borrow pit on the site. compaction. material shall state
thickness measured where it is the type, gradation
expressly required. D14 C12 limit and size where
Imported material Items for filling applicable.
M22 shall be deemed to be shall be deemed to
Excavation from material from off site. include additional A18
borrow pit on the Site filling necessitated Item description for
for filling, shall not be D15 by settlement or filling using mass
measured separately, Filling shall be classed penetration into concrete shall state
unless expressly as to stated depth underlying material. the specification of
required. or thickness where concrete.
material is provided C13
M23 of uniform total Items for filling to
The volume of compacted depth or embankments or on
imported material thickness such as in sloping ground shall
measured shall be the drainage blankets, be deemed to include
difference between the topsoiling, pitching benches.
nett volume of filling and beaching. Bulk
and the nett volume filling shall not be
of excavated material classed as to stated
derived from work depth or thickness
within Classes F and S not withstanding that
used for filling. it may be compacted
in separate layers of
M24 material of stated
The volume of thickness.
imported fill shall be
measured nett at the
place of fill.
M25
Backfill material for
excavation to remove
unsuitable material
shall be measured as
filling under item for
filling for replacement.
MyCESMM2 |
place of deposition.
43
CLASS F: EARTHWORKS
44
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
3 Filling M27
Filling of excavation
around completed
structures shall
be measured nett
| MyCESMM2
(MyCESMM2)
M28
Where filling is to be
deposited below water,
and the quantity
cannot be measured
Standard Method of Measurement ̵ Second Edition
satisfactorily by
any other means,
the volume shall be
measured as in the
transport vehicle at the
place of deposition.
Where filling is by
pumping, the volume
shall be measured by
settlement plates.
7 High energy impact 1 Selected excavated m3 M29
compaction general material other than High energy impact
filling topsoil or rock compaction general
2 Imported natural m3 fill existing ground
material other than shall be measured to
topsoil or rock the surface area to be
3 Existing ground m2 treated.
CLASS F: EARTHWORKS
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
4 Landscaping 1 Turfing m2 M30 D16 C14 A19
2 Hydroseeding m2 Measurement for spot The girth of trees Items for landscaping Item description for
3 Bio-degradable m2 turfing shall include the shall be measured shall be deemed landscaping shall state
erosion control areas of unturfed space from ground level to to include digging, the species of the
blanket between the sods. one-third height of planting media, turfing, hydroseeding,
4 Hedges m the trees or 1m from bedding, stalking, hedges and trees
5 Trees nr M31 ground level, whichever protection, watering, required.
The area of turfing and is lower. weeding, required
hydroseeding shall be fertilising, and A20
the area to the slope, if D17 replacement of Item description for
applicable. The height of trees dead items until turfing shall state the
shall be measured the vegetation is type of turfing (close
M32 from ground level to established. or spot).
Ungrown areas the lowest branch or
of turfing and crown, whichever is C15 A21
hydroseeding lower. Items for turfing on Item description for
exceeding 1 m² shall slopes steeper than hydroseeding shall
not be measured. 1 (vertical) and 3 state the technical
(horizontal) shall be specification.
M33 deemed to include
The lengths of hedges pegging down with A22
measured shall be their stakes. Item description for
developed lengths bio-degradable erosion
along the centre line. C16 control blanket shall
Items for bio- state the location and
M34 degradable erosion the spacing of the
The area of bio- control blanket shall fastening hook.
degradable erosion be deemed to include
control blanket shall fastening hooks and A23
be measured nett and netting required. Item description for
no allowance shall be trees shall state the
made for laps. minimum girth and
height.
A24
Item description for
landscaping and
hydroseeding shall
identify work upon
surface which is
inclined at an angle
exceeding 10° to the
horizontal.
MyCESMM2 |
45
CLASS F: EARTHWORKS
Malaysian Civil Engineering
Standard Method of Measurement ̵ Second Edition
(MyCESMM2)
46 | MyCESMM2
CLASS G
GEOTECHNICAL
WORK
MyCESMM2 | 47
48
ADDITIONAL
CLASS G: GEOTECHNICAL WORK MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
| MyCESMM2
(MyCESMM2)
Reinforced concrete foundation for retaining structures (included in artificial hard material submission of test or below the road level.
Class I: Concrete work). or unsuitable material, procedure, records and
Malaysian Civil Engineering
Sand replacement for ground treatment (included in Class F: Earthworks). unless otherwise stated reports.
in the item description.
Sub-soil drainage (included in Class Q: Drainage work).
Pile embankment measured under respective classes (included in D2
Class F: Earthworks, Class I: Concrete work, Class H: Piling work). Natural hard material
shall be materials
other than rock and
artificial hard material,
and requires other
specialised equipment.
Standard Method of Measurement ̵ Second Edition
D3
Rock and artificial
hard material shall be
materials that require
the use of either
hydraulic rock breaker
or pneumatic tools or
explosives.
C3
Items for moving
and handling shall be
deemed to include the
moving and handling of
all necessary plant and
equipment within the
site and from location
to location as often as it
is, whenever necessary
for the execution of the
CLASS G: GEOTECHNICAL WORK
whole operation.
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
2 Retaining structures 1 Gabion 1 Rock-filled gabion m3 D4 A2
2 Rock-filled gabion m2 Gabions filled with Item description for
mattress rocks exceeding 300 gabion shall state the
3 Filter layer m2 mm high shall be type and size of filling,
separator classed as rock-filled and the type, gauge, and
gabion, and those not protective coatings of
exceeding 300 mm the wire mesh. If laying
high as rock-filled underwater is required, it
gabion mattress. Filling shall be so stated.
shall be deemed to
be imported, unless A3
otherwise stated. Item description for rock-
filled gabion mattress
shall state the thickness.
2 Cribwall 1 Single cell m2 M1 C4 A4
2 Double cell m2 The area of single cell Items for cribwall shall Item description for
3 Triple cell m2 cribwall shall be the be deemed to include cribwall shall state the
4 Quadruple cell m2 sloping area from the precast reinforced concrete grade, length
5 Filter layer/ m2 commencing surface. concrete components of precast concrete
separator and granular infill header, combination
M2 materials. and type of granular
The area of multiple infill.
cells cribwall shall be
the sloping area of the
highest cells from the
commencing surface.
3 Reinforced soil 1 Reinforced earth m3 M3 D5 A5
slope filling Reinforced earth filling Reinforced earth Item description for
2 Reinforced granular m3 and reinforced granular filling and reinforced reinforced soil slope
filling filling shall be measured granular filling is shall state the location,
3 Erosion protection m2 nett volume within defined as filling within type and strength of
mats the reinforced zone. the reinforced zone. material used.
M4 D6
The area of erosion Reinforced earth A6
protection mat shall be filling and reinforced Item description for
the nett area to the granular filling shall be erosion protection mats
slope with no allowance in accordance with BS shall state the type of
for laps and anchorage. 8006-1:2010+ A1:2016. material and strength,
where applicable.
M5 D7 C5 A7
4 Reinforced soil wall 1 Wall facing m2
The area of reinforced Precast concrete panel Items for wall facing shall Item description for
2 Reinforced earth m3
soil wall is measured shall be classed as be deemed to include wall facing shall state
filling
from the commencing wall facing in retaining soil reinforcement and the type,
3 Reinforced granular m3
surface. stucture. galvanising where size, and shape, where
filling
4 Pull out test nr applicable, connections applicable; and the
M6 and/or jointing, geotextile concrete grade, type of
MyCESMM2 |
Sub-soil drainage shall be and accessories for wall soil reinforcement and
measured under Class Q. joints. wall height.
49
CLASS G: GEOTECHNICAL WORK
50
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
3 Slope stabilisation 1 Soil nailing 1 Stated length nr C6 A8
2 Pull out test nr Items for soil nailing Item description
shall be deemed to for soil nailing shall
include drilling of state the diameter
borehole, corrugated of the borehole and
| MyCESMM2
(MyCESMM2)
MyCESMM2 |
51
CLASS G: GEOTECHNICAL WORK
52
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
5 Ground treatment A19
Item description for
vibro compaction shall
state the depth of
treatment required.
| MyCESMM2
(MyCESMM2)
A20
Malaysian Civil Engineering
A21
Standard Method of Measurement ̵ Second Edition
M18
The mass measured
for reinforcement, in
tonne, shall be up to
two decimal place.
M19
Guide walls shall be
measured on both
sides of the diaphragm
walls.
MyCESMM2 |
53
CLASS G: GEOTECHNICAL WORK
54
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
8 Instrumentation 1 Piezometer nr C18 A29
2 Inclinometer nr Items for piezometer Item description
3 Surface marker nr and inclinometer for piezometer and
4 Settlement plate nr shall be deemed to inclinometer shall state
5 Displacement nr include pre-boring and the type, depth and
| MyCESMM2
(MyCESMM2)
extensometer A30
7 Deep levelling nr Item description for
datum settlement plate shall
state the dimensions
of plate, depth and
material used.
Standard Method of Measurement ̵ Second Edition
MyCESMM2 | 55
56
ADDITIONAL
CLASS H: PILING WORK MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
M1 C1 A1
Measurement covered under other classes:
Bored and driven depths Items for piling work shall Item description for piles
shall be measured along be deemed to include shall identify preliminary
Boring for site investigation work (included in Class D: Site investigation work). the axes of piles from the disposal of excavated and piles. Item description
commencing surface: surplus materials. shall identify raked piles
Setting out of piles and as-built drawings (included in Class A: General items). and their inclination
| MyCESMM2
(MyCESMM2)
A9
Item description for
jointings shall state
type, method and
detail of jointing
required.
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT
MyCESMM2 |
execution of the whole
piling operation.
57
CLASS H: PILING WORK
58
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
2 Piles 1 Bored piles 1 Depth bored or m M6 D1 C9 A10
2 Driven cast in situ driven Each group of items for Piles consisting of Items for bored piles Item description for
concrete piles 2 Boring through rock m bored piles, barrette driven permanent steel and barrette piles shall bored, cast in place,
3 Barrette piles 3 Permanent casings m pile, driven cast in casing, which is filled be deemed to include barrette piles and
4 Reinforcement t situ concrete piles, with concrete, shall be temporary casings, caisson piles shall state
| MyCESMM2
(MyCESMM2)
straight bars and caisson piles shall classified as driven cast stabilising agent, and the diameter.
5 Reinforcement t comprise: in situ piles where the enlarged bases.
Malaysian Civil Engineering
MyCESMM2 |
3 Piles 1 Steel pipe piles concrete infill, where
applicable.
59
CLASS H: PILING WORK
60
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
3 Piles A18
Item description for
steel H-piles and steel
pipe piles shall state
details of treatments,
| MyCESMM2
(MyCESMM2)
required.
A19
Item description for
steel H-piles and steel
pipe piles shall state
type of jointing.
2 Timber piles 1 Supply nr M13 D6 C17 A20
3 Precast concrete 2 Depth driven m The areas of driven The lengths of timber Items for jetting Item description for
Standard Method of Measurement ̵ Second Edition
sheet piles 3 Pre-boring m precast prestressed piles and precast deemed to include jet supply of timber piles
4 Precast prestressed 4 Jointing nr concrete sheet piles concrete sheet piles pipes, hoses and jet shall state the grade of
concrete sheet piles 5 Cut-off piles nr shall be calculated shall be the total pump. timber, cross-sectional
6 Preparing head nr by multiplying the number of piles, dimensions, length and
7 Jetting m horizontal lengths of of stated lengths, any pressure treatment
the pile walls formed expressly required to required.
by the average depths be supplied.
measured from the A21
cut-off levels. Item description for
supply of precast and
prestressed concrete
sheet piles shall state
thickness, length and
width.
MyCESMM2 |
61
CLASS H: PILING WORK
Malaysian Civil Engineering
Standard Method of Measurement ̵ Second Edition
(MyCESMM2)
62 | MyCESMM2
CLASS I
CONCRETE WORK
MyCESMM2 | 63
64
ADDITIONAL
CLASS 1: CONCRETE WORK MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
| MyCESMM2
(MyCESMM2)
Piling work (included in Class H: Piling work). and compaction of and maximum size of
a) reinforcement and concrete. aggregate.
Manholes for sewerage pipework (included in Class O: Pipework).
Malaysian Civil Engineering
MyCESMM2 |
65
CLASS I: CONCRETE WORK
66
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
4 Precast concrete 1 Columns nr M4 D5 C3 A9
2 Beams nr Parapet shall be Concrete components Items for precast Item description for
3 Prestressed beams nr measured as wall. which are cast other concrete shall be each type of precast
4 Walls nr than in their final deemed to include concrete unit shall state
5 Slabs nr M5 position shall generally reinforcement, the position of the work
| MyCESMM2
(MyCESMM2)
6 Segmental units nr Plank shall be be classed as precast formwork, joint and and specification of the
7 Units for subways, nr measured as slab. concrete units. finishes. concrete to be used.
Malaysian Civil Engineering
vehicular or
pedestrian culverts D6 C4 A10
and viaducts Where site precasting Items for prestressed Item description for
8 Other concrete nr of units is adopted precast units shall be each precast concrete
forms (excluding those deemed to include unit shall state the
with multiple use of prestressing. concrete mix type or
formwork), and the mark number. Units with
nature of the work is different dimensions shall
the characteristic of be given defferent types
in situ concrete but or mark numbers.
Standard Method of Measurement ̵ Second Edition
A12
Item description for
columns, beams,
segmental units, units for
subways, and vehicular
or pedestrian culverts
and ducts, copings,
viaducts and other
concrete forms, shall
state the cross-section,
type and total length.
A13
Item description for walls
and slabs shall state the
type, area and average
thickness.
A14
Item description for units
for subways, vehicular or
pedestrian culverts and
viaducts shall state the
CLASS I: CONCRETE WORK
MyCESMM2 |
the area of formwork or other unique
obscured by voids and identifying feature.
67
CLASS I: CONCRETE WORK
inserts.
68
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
5 Formwork 8 For voids 1 Depth not nr M10 D9 A21
exceeding 1 m Formwork for the The size of voids for Item description
2 Depth exceeding m2 surfaces of voids larger I58* shall be as follows: for voids shall state
1m than the upper bound the cross-section or
values as defined Class Cross diameter and the
| MyCESMM2
(MyCESMM2)
M11
No deduction shall be Other voids 0.1 m² -
made for formwork to (area) 0.5 m²
voids smaller than the
lower bound values as D10
defined in rule D9. The depth of voids
shall be measured
perpendicularly to the
Standard Method of Measurement ̵ Second Edition
adjacent surface of
concrete.
D11
The maximum
diameter or cross-
section shall be taken
when the voids have
two unequal diameters
or cross-sections.
6 Reinforcement 1 Mild steel bars 1 Nominal diameter: t M12 D12 C7 A22
2 High tensile bars 6 mm The mass of steel The nominal diameter Items for Item description for
3 Reinforcing bars of 2 Nominal diameter: t reinforcement shall stated in item reinforcement shall special joint shall state
other stated 8 mm be taken as 0.785 description for bar be deemed to include the type of joint and
materials 3 Nominal diameter: t kg/m per 100 mm² of reinforcement shall labour for cutting, size of reinforcing bars.
4 Stainless steel bars 10 mm cross-section (7.85 t/ be the cross-sectional bending, and placing.
of stated quality 4 Nominal diameter: t m³). The mass of other diameter defined in MS A23
12 mm reinforcing materials 146. C8 Item description
5 Nominal diameter: t shall be taken as stated Items for for steel fabric
16 mm in the contract. D13 reinforcement reinforcement to MS
6 Nominal diameter: t Sleeve joints, steel shall be deemed to 145 shall state the type,
20 mm M13 welded, swaged or include supporting fabric ref number or
7 Nominal diameter: t The area of additional screwed and the like in reinforcement other letter in accordance
25 mm fabric in laps shall not reinforcing bars shall than steel supports to with MS 145.
8 Nominal diameter: t be measured. be classed as special top reinforcement.
stated exceeding joints.
32 mm
CLASS I: CONCRETE WORK
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
6 Reinforcement 5 Special joints nr M14 A24
The mass measured Item description
6 Steel fabric 1 Nominal mass: m2 for steel support to for other fabric
7 Fabric of other not exceeding top reinforcement reinforcement shall
stated material 2 kg/m2 shall include the mass state the materials,
2 Nominal mass: m2 of reinforcement fabric reference sizes
2 - 3 kg/m2 expressly required in and nominal mass per
3 Nominal mass: m2 laps and special chairs. square meter.
3 - 4 kg/m2
4 Nominal mass: m2 M15
4 - 5 kg/m2 The mass measured
5 Nominal mass: m2 for reinforcement is in
5 - 6 kg/m2 tonne and shall be up
6 Nominal mass: m2 to two decimal places.
6 - 7 kg/m2
7 Nominal mass: m2
7 - 8 kg/m2
8 Nominal mass: m2
stated exceeding
8 kg/m2
7 Concrete ancillaries 1 Joints 1 Construction joints m M16 C9 A25
2 Contraction joints m Joints shall be Items for joints shall Item description
3 Expansion joints m measured at locations be deemed to include for joints shall state
4 Waterstops m where they are formwork. the dimensions,
5 Sealed rebates m expressly required. materials and nature of
or grooves C10 components.
6 Dowels - plain or nr M17 Items for waterstops
greased The length of shall be deemed to A26
7 Dowels - sleeved nr waterstops shall be include cutting and Item description for
or capped measured along their jointing of waterstops waterstops shall state
centre lines. and provision of special the material and the
fittings at angles and actual width.
junctions.
MyCESMM2 |
69
CLASS I: CONCRETE WORK
70
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
7 Concrete ancillaries 3 Finishing of 1 Class U1 finish m2 M19 D16 C12 A28
top surfaces 2 Class U2 finish m2 The areas of tops Class U1, U2, U3 and Items for other stated Item description for
3 Class U3 finish m2 of walls and other U4 finishes shall be as surface treatment shall concrete ancillaries
4 Class U4 finish m2 surfaces which are not defined in the standard be deemed to include shall state the
given separate finishing specification for road materials, surface materials, thickness
| MyCESMM2
(MyCESMM2)
treatment shall not be works as expressly treatment, joints and and surface treatment,
measured as finishings stated. formwork. and other stated
Malaysian Civil Engineering
C15
Items for sterilising and
flushing of tanks shall
be deemed to include
provision of potable
water and chemicals as
expressly required.
MyCESMM2 |
71
CLASS I: CONCRETE WORK
Malaysian Civil Engineering
Standard Method of Measurement ̵ Second Edition
(MyCESMM2)
72 | MyCESMM2
CLASS J
BRICKWORK,
BLOCKWORK
AND MASONRY
MyCESMM2 | 73
74
ADDITIONAL
CLASS J: BRICKWORK, BLOCKWORK AND MASONRY MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
| MyCESMM2
(MyCESMM2)
M2
Volumes and areas
measured for
brickwork, blockwork,
and masonry shall
include the areas of
joint, and exclude
those of copings and
sills. No deduction
Standard Method of Measurement ̵ Second Edition
A4
Item description
for walls, facing to
concrete, casing
to metal sections,
columns and piers
shall state the bonding
pattern, type of mortar,
type of jointing and
pointing.
A5
Item description
for walls, facing to
concrete, casing
to metal sections,
and columns and
piers, either in cavity
or composite wall
construction, shall be
so stated.
4 Miscellaneous work 1 Surface features 1 Copings and sills m M4 D5 A6
2 Rebates and chases m The length of surface Columns and piers Item description for
3 Cornices m features measured attached to walls or surface features shall
4 Band courses m shall be the mean facing of the same include sufficient
5 Corbels m lengths. The areas material shall be details to identify
6 Pilasters m measured for fair classed as pilasters. the materials, special
7 Plinths m facing finishes shall masonry, special or cut
8 Fair facing m2 be those expressly bricks and blocks. The
required, and shall be spacing of intermittent
measured at the face. surface features shall
be stated in the item
description.
A7
Item description
for surface features
shall state the cross-
sectional dimensions.
MyCESMM2 |
75
CLASS J: BRICKWORK, BLOCKWORK AND MASONRY
76
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
4 Miscellaneous work 2 Ancillaries 1 Damp proof m M5 C3 A8
courses The length of Items for built-in pipes Item description for
2 Infills of stated m2 additional material in and ducts shall be damp proof courses
thickness laps of damp proof deemed to include and infills shall state
3 Built-in pipes and nr course and joint their supply, unless the materials and
| MyCESMM2
(MyCESMM2)
works C4 A9
5 Movement joints m Items for bonds to Item description for
6 Joint reinforcements m existing works shall built-in pipes and
be deemed to include ducts shall stated the
fixing and ties. length where they
exceed 1.0 m.
A10
Item description for
built-in pipes and
Standard Method of Measurement ̵ Second Edition
MyCESMM2 | 77
78
ADDITIONAL
CLASS K: TIMBER WORK MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
| MyCESMM2
(MyCESMM2)
Timber sleepers (included in Class T: Rail track). Malaysian Timber boring, cutting and surface finishes.
Industry Board or jointing.
Timber fencing (included in Class V: Miscellaneous work).
Malaysian Civil Engineering
by other relevant
Timber roof structure, doors, windows and skirting (included in Class M: Building work). governing authorities.
Finishes (included in Class N: Painting work).
2 Decking 1 Floors m2 M2 D3 C2 A3
3 Boarding 2 Walls m2 No deduction from the Surfaces of columns Items for walls and Item description for
3 Soffits m2 areas measured for shall be classed as soffits shall include decking and boarding
timber decking shall walls. Surfaces of any temporary staging shall state the use and
be made for openings beams and ceiling shall required. thickness of timber.
and holes each not be classed as soffits.
exceeding 0.50 m². C3 A4
D4 Decking and boarding Item description for
M3 The thickness stated shall be deemed to decking and boarding
Structural load bearing shall be the nominal include framework shall state the size
timber forming part of thickness. where expressly and spacing of the
the framework shall be required. members in framework
measured under timber where expressly
components. required.
MyCESMM2 | 79
80
ADDITIONAL
CLASS L: METALWORK MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
| MyCESMM2
(MyCESMM2)
Metalwork in piling work (included in Class H: Piling work). other permissible delivery of components
Metal formwork in concrete (included in F: Earthworks and deviations. The mass to site where required.
Malaysian Civil Engineering
M3
The mass of members,
other than plates shall
be calculated from
overall lengths of the
members with no
deductions for splay
cut or mitred ends.
M4
The mass of member
measured shall be that
of rolled or extruded
sections, built up and
fabricated sections,
bracings, external
diaphragms, shear
connectors, stiffeners,
cleats, packs, splice
plates, and other
fittings.
CLASS L: METALWORK
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
1 Supply and erection 1 Hot rolled section 1 Vertical members t M5 D1 C1 A2
of structural 2 Cold rolled section and columns The mass of steel to Frames shall include Items for supply and Item description for
members 3 Built-up box or 2 Horizontal members t BS 4449 or MS146 plane frames, trusses, erection of structural supply and erection
fabricated sections and beams shall be taken for space frames, lattice members shall be of structural members
4 Extruded sections 3 Portal frames t measurement as 785 frames and tower deemed to include shall state the materials,
4 Frames t kg/m² per 100 mm structures delivery, protective grades, and their use.
5 Decking panel t thickness (7.85 t/m³), and decorative surface
6 Ancillaries t unless otherwise stated D2 treatment, jointing A3
7 Grillages t in the specification Decking shall include type, fabrication, and Item description for
or in the supplier’s plates and deck panels. handling and hoisting. supply and erection
catalogue. The masses of structural members
of other metals shall D3 C2 shall state the alignment
be taken as stated in Ancillaries shall include Items for supply and on plan, and camber
the specification or bracings, purlins, erection of structural requirements.
supplier’s catalogue. cladding rails, and members shall be
struts. deemed to include A4
non-destructive testing Item description for
as expressly required. supply and erection
of structural members
C3 shall state separately
Items for supply and and locate separate
erection of structural structural frames and,
members shall be where appropriate the
deemed to include parts of the frames.
bolted connections
using bolts of nominal A5
diameter less than 16 Item description for
mm, together with supply and erection
gusset and end plates. of structural members
shall state tapered or
castellated members.
8 Overhead crane nr D4 C4 A6
Overhead crane shall Items for supply and Item description for
be permenant structure erection of structural supply and erection
with platform, crane members shall be of structural members
runways, bridge crane, deemed to include other than for portal
hoist, frame, motor, welded connections. frames shall state
track as expressly Welded connections cranked members.
stated. shall be deemed to
include gusset and end A7
plates. Item description
for overhead crane
shall state the crane
capacity tonnage, type,
materials and principal
dimensions.
MyCESMM2 |
81
CLASS L: METALWORK
82
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
1 Supply and erection C5 A8
of structural Items for overhead Item description for
members crane shall be deemed overhead crane shall
to include runways, state where fixing
bridge, motor, track, clips and resilient pads
| MyCESMM2
(MyCESMM2)
2 Tie rod nr
MyCESMM2 |
83
CLASS L: METALWORK
Malaysian Civil Engineering
Standard Method of Measurement ̵ Second Edition
(MyCESMM2)
84 | MyCESMM2
CLASS M
BUILDING WORK
MyCESMM2 | 85
86
ADDITIONAL
CLASS M: BUILDING WORK MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
| MyCESMM2
(MyCESMM2)
MyCESMM2 |
8 Sprayed or brushed m² in area. inclination from the
waterproofing horizontal is 80° - 90°.
87
CLASS M: BUILDING WORK
88
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
3 Waterproofing A8
Item description
for isolated groups
of surfaces shall
identify the work to
| MyCESMM2
(MyCESMM2)
be waterproofed and
its location shall be so
Malaysian Civil Engineering
stated.
4 Sheet lining 1 Butyl rubber M6
membrane 2 Ethylene propylene Isolated groups of
monomer rubber surfaces of different
3 PVC shapes or dimensions
4 Polypropylene shall be measured as
5 Polyethylene separate items.
6 Polyurethane
7 Proprietry system
Standard Method of Measurement ̵ Second Edition
C11
All locks deemed to be
supplied with master
keys and keys.
CLASS M: BUILDING WORK
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
6 Glazing 1 Glass m2 D11 A12
2 Glass in large panes m2 Panels which exceeded Item description for
3 Special glass nr 4 m² shall be classed glazing shall state the
4 Hermetically sealed nr as glass in large panes. materials, their nominal
units thickness, the method
5 Mirrors nr D12 of glazing and the
6 Patent glazing nr The following materials method of securing the
used in glazing shall glass and incidental
be classed as special metal work supporting
glass: patent glazing.
MyCESMM2 |
4 Wash aggregates
angles, fillets, built-up prefabricated panels
5 Spray tiles m2
edge and laying to shall state the size and
6 Prefabricated panel m2
89
CLASS M: BUILDING WORK
| MyCESMM2
(MyCESMM2)
applicable.
A21
C15 Item description for
Items for ceiling finishes access panel in ceiling
shall be deemed to shall state the overall
include any temporary dimensions.
staging required.
C16
Items for suspended
Standard Method of Measurement ̵ Second Edition
C17
Items for ceiling shall
be deemed to include
sloping ceiling.
8 Floor and wall 1 Wall partitions 1 Solid m2 M8 C18 A22
system 2 Full board m2 The length measured Items for wall partitions Item description for
3 Half board with m2 for wall partitions shall shall be deemed to wall partitions shall
fixed glass exclude the length of include fixing, supply state the materials,
4 Cubicle sets nr voids which extend to of fixing components, finishes and finished
the full height of the and drilling or cutting thickness.
partition. of associated work.
A23
C19 Item description for
Items for wall partitions cubicle sets shall state
shall be deemed to the overall dimensions.
include forming holes,
cutting and making
good for services.
2 Raised access floor m2 D13
Item for raised access
floor refers to a false
floor raised from the
ground to serve as
an accessible floor
system for the laying of
flooring services such
as power lines and
cables.
CLASS M: BUILDING WORK
CLASS N
PAINTING WORK
MyCESMM2 | 91
92
ADDITIONAL
CLASS N: PAINTING WORK MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
| MyCESMM2
(MyCESMM2)
in area.
C2 A2
Items for painting shall Item description for
be deemed to include preparation of surfaces
the application of base shall be identified and
primer/sealer required stated where more
before painting the than one type of
subsequent coats. preparation is specified
for the same surface.
Standard Method of Measurement ̵ Second Edition
7 Metal sections m2 M4
8 Pipework m2 The area measured
for painting pipework
shall be the length
multiplied by the girth
of each length of
pipe or lagged pipe
with no deductions or
additions for flanges,
valves, other projecting
fittings and hangers.
MyCESMM2 |
93
CLASS N: PAINTING WORK
Malaysian Civil Engineering
Standard Method of Measurement ̵ Second Edition
(MyCESMM2)
94 | MyCESMM2
CLASS O
PIPEWORK
MyCESMM2 | 95
96
ADDITIONAL
CLASS O: PIPEWORK MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
| MyCESMM2
(MyCESMM2)
5 Depth: 3.0 m - 4.0 m m pipeline. commencing surface to multiple handling, for work involving
6 Depth: 4.0 m - 5.0 m m the inverts of the pipes. disposal of surplus excavation which the
7 Depth: 5.0 m - 6.0 m m M2 excavated material commencing surface is
8 Depth: Length of trench D2 (including unsuitable also the original surface.
Exceeding 6.0 m m excavation shall be Unless otherwise material), upholding
measured through expressly required, the sides of excavation, A3
and include any space nominal width of the allowance for working Item description for
occupied by valves trench shall be the space, backfilling, excavation shall state
(except those in nominal diameter of and removal of dead where more than
chambers) and fittings. the pipe or of the larger services. one pipe is expressly
pipe if laid one above required to be laid in
the other, plus 500 mm. one trench and also
Where pipes are laid identify the pipe runs.
side by side, the nominal
trench width shall be the A4
sum of all the internal Item description for
diameters and spacing trench excavation shall
2 Extra over 1 Rock m3 M3 between the pipes, plus C3 state the pipe diameter
2 Natural hard material m3 Excavation in rock, 500 mm. Items for excavation in and location.
3 Artificial hard m3 natural and artificial roads and pavements
material hard material, and shall be deemed to
4 Unsuitable materials m3 unsuitable materials include road cutting and
5 Roads and m2 shall be measured as the reinstatement.
pavements volume of the respective
item removed within
the limits of trench
excavation.
CLASS O: PIPEWORK
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
1 Excavation 3 Manhole and 1 Earth m3 M4 D3 C4 A5
chamber 2 Rock m3 An isolated volume of Earth shall be deemed Extra over excavation Item description for
3 Natural hard material m3 rock or natural hard to be materials other shall be deemed to roads and pavements
4 Artificial hard m3 material and artificial than topsoil, natural include for breaking up shall state thickness.
material hard material occurring hard material, rock, rock, natural or artificial
5 Unsuitable materials m3 within the trench artificial hard material hard materials when it
6 Roads and m2 excavation shall not be or unsuitable material, occur.
pavements measured separately, unless otherwise stated
unless its volume in the item description.
C5
exceeds 0.25 m³. Items for trench
D4 excavation shall be
M5 Extra over item is deemed to include
Excavation shall be measured as extra reinstatement of original
measured as excavation in and above excavation surface unless covered
earth to stated depth and measured in earlier item. by separate items in this
another item for extra over class.
breaking up rock.
C6
M6 Items for trench
Excavation in roads excavation shall be
and pavements shall deemed to include
be measured vertically excavation for bedding
from the nominal trench if applicable.
width for pipes and up to
the external surfaces for C7
manholes and chambers. Items for trench
excavation shall be
M7 deemed to include
Volume of excavation excavation for trust
for manholes and blocks and anchor
chambers shall be blocks.
measured vertically
between their external
surfaces or extended
base and the limits of
trench excavation.
M8
The volume of extra
over excavation and
backfilling for pipe laying
in headings, in thrust
boring and pipe jacking
shall be measured by
multiplying together the
internal cross-sectional
area of pipe and the
length of the material
MyCESMM2 |
excavated or backfilled.
Packing in headings
97
CLASS O: PIPEWORK
| MyCESMM2
(MyCESMM2)
or canal width: M10 when the water surface broken through and
exceeding 10 m Below ground is at the higher level of reinstated and the type
4 Fence nr crossings of streams fluctuation. of lining.
5 Sewer or drain nr shall be measured
6 Wall nr only where their width A7
7 Other stated nr exceeds 1 m. Item description
underground for below ground
services M11 crossings shall state the
River, stream, diameter and method of
culvert, and canal excavation.
Standard Method of Measurement ̵ Second Edition
crossings exceeding
10 m in width shall
be measured where
special pipe laying
methods are not used.
3 Backfilling, bedding, 1 Backfilling 1 Sand m3 M12 C9 A8
support and 2 Selected excavated m3 Backfilling of trenches Items for concrete Item description for
protection suitable materials with excavated material shall be deemed to backfilling, bedding,
3 Imported materials m3 shall not be measured. include formwork support and protection
4 Mass concrete m3 and reinforcement as shall state the type and
5 Reinforced concrete m3 M13 applicable. dimensions.
The volume of
backfilling in pipe
trenches shall
be calculated by
multiplying the average
depth by the length of
backfill placed by the
nominal trench width
less volume occupied by
the pipe.
2 Beds 1 Sand m A9
3 Surround 2 Selected excavated m Item description for
4 Haunches suitable materials bedding shall state the
3 Imported materials m pipe nominal diameter.
4 Mass concrete m
5 Reinforced concrete m A10
Item description for
bed, haunches and
surrounds shall state
the depth and material
used.
CLASS O: PIPEWORK
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
3 Backfilling, bedding, 5 Wrapping and m A11
support and lagging Item description for
protection 6 Concrete stools and nr bed, haunches and
thrust blocks surrounding to multiple
7 Other isolated pipe nr pipes shall state the
supports number of pipes and
maximum nominal
distance between the
inside faces of the other
pipe walls.
4 Pipes 1 Sewerage 1 Vitrified clay m M14 C10 A12
2 Water supply 2 Reinforced concrete m Lengths of pipes shall Items for pipes shall Item description for
3 Other pipe works 3 Ductile iron m be measured along their be deemed to include pipes shall state the
4 Unplasticised m centre lines between supply, and laying or shape, joint types,
polyvinyl chloride straight specials, fittings installation. nominal pipe diameter,
5 Stainless steel m or fittings connected to internal and external
6 Polyethylene m manholes and chambers C11 lining or protection
7 Mild steel m for pipes of diameter Items for pipes shall be requirements and
8 Galvanised steel m more than 100 mm. deemed to include all reference given to
wrapping, lining, and applicable Malaysian or
M15 lagging as required. other relevant standard.
Length of pipes
entering sewerage C12 A13
5 Pipes 1 Glass reinforced m manholes and other Items for pipes shall Item description for
plastic chambers shall be be deemed to include pipes in steel shall state
2 Concrete/cement m measured to the inside pipe cutting where the type (mild or carbon
lined surface of the chambers, applicable, unless steel) and the grade.
3 HDPE m except that pipes and otherwise stated.
4 Acrylonitrile m fittings comprising
butadiene styrene backdrops shall be C13
5 Oriented m included in the items for Items for pipes of
unplasticised manholes. diameters less than 100
polyvinyl chloride mm shall be deemed to
include fittings, valves
and joints.
6 Fittings, valves and 1 Straight specials 1 Plain ended nr M16 D6 C14 A14
joints 2 Plain and flange nr Fittings, valves and A straight special is a Items for straight Item description for
ended joints of diameter less length of pipe either specials shall be fittings, valves and
3 Flange ended nr than 100 mm shall not cut to length or made deemed to include joints shall state the
4 Plain ended with nr be measured. to order. cutting. material, nominal
puddle flange diameter, joint type
5 Plain and flange nr M17 D7 and pressure rating.
ended with Straight specials Straight specials
puddle flange shall be measured and joints on pipes A15
6 Flange ended with nr only where they are of different nominal Item description for
puddle flange expressly required diameter shall be straight specials shall
classified according to state the length and
the nominal diameter location of flanges
MyCESMM2 |
of the largest pipe. including puddle
flange.
99
CLASS O: PIPEWORK
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
6 Fittings, valves and 2 Fittings 1 Bends nr M18 A16
joints 3 Fittings special 2 Junction and nr Fittings, valves and Item description for
branches joints comprising fittings and fittings
3 Tapers nr backdrops to manholes special shall state the
4 Bell mouths nr shall be included in the nominal diameter, angle
100 | MyCESMM2
(MyCESMM2)
7 Hydrants nr A17
8 Tapping saddle Item description for
tapers shall state the
principal dimension and
nominal diameter of
the main pipe and the
reduce pipe.
A18
Item description for
Standard Method of Measurement ̵ Second Edition
D10 C17
Quarter turn valve is Items for actuator shall
the valve that required be deemed to include
quarter turn motion valve where expressly
such as butterfly, ball required.
valve etc.
D11
Special valve is a valve
that the operation is
assisted by the special
medium such as air
or pressure or valve
operated by itself.
CLASS O: PIPEWORK
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
6 Fittings, valves 5 Joints 1 Welded collar joints nr M19 D12 C18
and joints 2 Welded slip joints nr Joints shall be Mechanical coupling Items for joints shall
3 Butt welded joints nr measured separately, shall mean normal be deemed to include
4 Mechanical coupling nr unless otherwise mechanical coupling thrust block and supply
joints expressly stated. and stepped mechanical of all jointing materials,
5 Flange adaptor joints nr coupling. bolts, nuts, washers,
6 Expansion joints nr gaskets, making good of
7 Push-on collar joints nr joints both internally and
8 Push-on slip joints nr externally as expressly
required.
C19
Items for welded collar
6 Joints 1 Stepped coupling nr joints and welded slip
2 Universal coupling nr joints shall be deemed
to include welding to
the internal of the pipe
and air testing of joints
as expressly stated.
7 Flow meter/bulk nr A20
meter Item description for
flow meter shall state
the diameter and type.
7 Special pipe laying 1 In heading 1 Jacking pit nr M20 D13 C20 A21
method 2 Thrust boring 2 Receiving pit nr Special pipe laying Pipe made with Items for special Item description for
3 Pipe jacking 3 Pipe sleeve m methods shall be reinforced concrete as pipe laying methods special pipe laying
4 Microtunneling 4 Composite pipe m measured only where the external shell and excluding submarine methods shall identify
5 Utility pipes in pipe m they are expressly pipe from O4** and pipe laying shall be the material and
sleeves required. O5** shall be classed as deemed to include nominal diameter, and
6 Pressure grouting m3 composite pipe. mobilisation and the run of pipes.
5 Controlled 1 Horizontal m demobilisation.
drilling directional drilling A22
2 Impact molling m C21 Item description for
Items for special pipe pipe sleeves and
laying methods shall composite pipe shall
6 Submarine pipe 1 Bathymetric survey m be deemed to include state the type of
laying 2 Sub-sea geophysical m excavation, sheet piles, material, diameter and
survey shoring, and backfilling. the class.
3 Mobilisation and sum
demobilisation C22 A23
4 Provision of winch sum Items for sub-sea Item description for
equipment geophysical survey slip lining shall state
5 Trenching m shall be deemed to diameter, the minimum
6 Concrete cladding m include report by a finished internal size,
to pipes geophysicist. type of lining, its
7 Pipes laid by float m thickness or grade.
and sink
8 Pipes laid by bottom m
pull
MyCESMM2 | 101
CLASS O: PIPEWORK
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
7 Special pipe laying 7 Submarine pipe 1 Pipes laid by lay m C23 A24
method laying barge Items for pipe sleeves Item description of
2 Tie in to land pipes sum and composite pipe pipe jacking pit shall
3 Swabbing and m shall be deemed to state pit size and depth
gauging include excavation of 2 m stages.
102 | MyCESMM2
(MyCESMM2)
C29
Testing of gravity
sewer shall be deemed
to include testing by
infiltration as required.
C30
Items for pressure and
leakage testing shall
be deemed to include
provision of all water
required for testing.
C31
Items for flushing
and sterilising shall
be deemed to include
chemicals and provision
of water.
C32
Items for holiday
detector test and
ultrasonic test
shall be deemed to
include provision of
equipment, testing and
maintenance.
MyCESMM2 | 103
CLASS O: PIPEWORK
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
8 Miscellaneous work 4 Temporary diversion 1 Temporary diversion sum C33 A30
of existing utilities Items for temporary Item description for
2 Temporary diversion sum diversion shall be temporary pumping
of sewage flows deemed to include over of sewage flows
coordination with shall state the pipe
104 | MyCESMM2
(MyCESMM2)
authorities, payment
of fees, isolations for
shutdown of flows and
dewatering.
C35
Items for new manhole
shall be deemed to
include breaking away
of existing sewer pipe
as required, and all
pipework and metalwork
within the manhole.
6 Connection to 1 Hot tapping nr C36 A32
existing water mains connection Items for shut down Item description for
2 Line stopping nr connection shall be connection to existing
3 Shut down nr deemed to include water main shall state
connection coordination with the material and sizes of
authorities, payment the existing pipe to be
of fees, isolations for connected.
shutdown of flows, and
dewatering.
7 Pipework ancillaries 1 Marker posts nr C37 A33
2 Ring girder nr Items for marker post, Item description for ring
3 Pipe strap nr ring girder, pipe straps, girder, pipe strap, and
4 Spike guard nr and spike guards shall spike guard shall state
be deemed to include the type of material and
supply and installation, diameter of pipe.
including painting.
8 Water sampling nr C38
station Water sampling station
shall be deemed to
include connection to
CLASS O: PIPEWORK
the mains.
CLASS P
PIPE
REHABILITATION
WORK
MyCESMM2 | 105
ADDITIONAL
CLASS P: PIPE REHABILITATION WORK MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
106 | MyCESMM2
(MyCESMM2)
6 Pipe bursting m
MyCESMM2 | 107
CLASS P: PIPE REHABILITATION WORK
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
1 Rehabilitation of 7 External grouting 1 Number of holes nr A12
existing pipework 2 Injection of grout m3 Item description for
system and materials stated cured in place lining,
in situ jointed pipe
lining, segmental lining
108 | MyCESMM2
(MyCESMM2)
A13
8 Pipework 1 Cured in place lining m
Item description for
2 In situ jointed pipe m
in situ jointed pipe
lining
lining and segmental
Standard Method of Measurement ̵ Second Edition
3 Segmental lining m
lining shall state the
4 Stated proprietary m
offset where the lining
lining
is curved to an offset
5 Gunite coating m2
which exceeds 35 mm
6 Annulus grouting m3
per metre.
A14
Item description for
gunite coating shall
state thickness.
2 Rehabilitation of 1 Abandonment of nr
existing manholes existing manholes
2 Modification/ 1 Identification of nr C9 A15
Alteration of lost manhole Items for abandonment Item description
manholes 2 Raise-up manhole nr of existing manholes for rehabilitation of
3 Replace of manhole nr shall be deemed to existing manholes shall
cover include sealing off state the details of
4 Reinstatement nr the ends of existing work required.
pipework, breaking
down of top of
manhole to flush with
existing ground and
backfilling.
3 Rehabilitation 1 Marker posts nr C10 A16
ancillaries of work 2 Ring girder nr Items for marker post, Item description for
3 Pipe strap nr ring girder, straps, ring girder, pipe strap,
4 Spike guard nr and spike guards shall and spike guard shall
5 Water sampling nr be deemed to include state the type of
station supply and installation, material and diameter
6 Special treatment of sum including painting. pipe.
sludge
CLASS P: PIPE REHABILITATION WORK
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
3 Rehabilitation C11 A17
ancillaries of work Items for water Item description
sampling station shall for rehabilitation
be deemed to include ancillaries work shall
connections to the state detail of the
mains. works.
A18
Item description
for water sampling
station and special
treatment of sludge
shall state details
and descriptions that
can be identified
by reference to the
drawings.
MyCESMM2 | 109
CLASS P: PIPE REHABILITATION WORK
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
4 Desilting A22
Item description for
desilting works for
mechanical equipment
ie tanks, chambers and
110 | MyCESMM2
(MyCESMM2)
5 Interruptions 1 Preparation of hr M6
existing sewer Interruption shall be
2 Stabilisation of hr measured only where
existing sewers a minimum capacity
is expressly required
and for periods of time
during normal working
hours when the flow
Standard Method of Measurement ̵ Second Edition
4 Work on lateral to hr
renovated sewers
5 Work on manhole hr
MyCESMM2 | 111
ADDITIONAL
CLASS Q: DRAINAGE WORK MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
112 | MyCESMM2
(MyCESMM2)
3 Depth: 2.0 m - 2.5 m m measured along the excavation shall be include preparation the commencing
4 Depth: 2.5 m - 3.0 m m centre line of the drain. measured from the of surfaces, multiple surface of each item
5 Depth: 3.0 m - 4.0 m m commencing surface to handling, disposal for work involving
6 Depth: 4.0 m - 5.0 m m M2 the inverts of the drain. of surplus excavated excavation for which the
7 Depth: 5.0 m - 6.0 m m The length of drain material (including commencing surface is
8 Depth: m excavation shall be D2 unsuitable material), also the original surface.
Exceeding 6.0 m measured up to inlet Earth shall be deemed upholding sides of
and outlet structures, to be materials other excavation, allowance A2
and to the sumps. than topsoil, natural for joints, backfilling, Item description for
hard material, rock, and removal of dead excavation shall identify
artificial hard material, services. separately excavation
or unsuitable material, which is expressly
unless otherwise stated required to be carried
in the item description. out by hand.
M6
Volume of excavation
in sumps shall be
measured between
their external surfaces,
or extended base,
until the limits of drain
excavation.
A8
Item description for
cascade drains shall
state the location.
MyCESMM2 | 113
CLASS Q: DRAINAGE WORK
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
3 Subsurface drains 1 Subsoil drain m C5 A9
2 Outlet drain m Items for subsurface Item description for
3 Drainage blanket m2 drains shall be deemed subsurface drains shall
4 Scupper drain m to include geotextiles state the material, type,
5 Slotted drain m fabric, lining and filter size, shape, spacing,
114 | MyCESMM2
(MyCESMM2)
C6
Items for outlet drain A10
shall be deemed to Item description for
include bends, filter drainage blankets shall
fabric, and concrete state the material, type
surround. and thickness.
ground downpipes downpipes shall be as downpipes for shall be deemed to downpipes shall state
measured along their drainage of structures include fixing and the type, diameter and
centre lines, and shall to ground level shall be supply of fixing the materials of the
include the lengths classified as drainage components. components.
occupied by fittings, to structures above
with no allowance for ground.
laps.
D4
Fittings to downpipes
shall include bends,
swan necks, shoes, and
outlet fixed directly to
downpipes.
C11
Items for inlet/outlet
shall be deemed to
include concrete,
reinforcement, formwork,
rib-rabs, river protection
and all associated works.
MyCESMM2 | 115
CLASS Q: DRAINAGE WORK
Malaysian Civil Engineering
Standard Method of Measurement ̵ Second Edition
(MyCESMM2)
116 | MyCESMM2
CLASS R
ROADS AND
PAVINGS
MyCESMM2 | 117
ADDITIONAL
CLASS R: ROADS AND PAVINGS MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
118 | MyCESMM2
(MyCESMM2)
Traffic management and control). course. The areas of shall be classified as include concrete,
Temporary traffic signs and barriers, barricades, and delineators (included in manholes covers and reference to to JKR reinforcement, joints,
Malaysian Civil Engineering
Class C: Traffic management and control). other intrusions into ArahanTeknik (Jalan) formwork to form and
a course shall not be or by other relevant shape and finishes to
Fences and gates (included in Class V: Miscellaneous work).
deducted where the authorities. concrete.
Drainage (included in Class Q: Drainage work). area of the intrusion is
Geotextile and geogrid (included in Class G: Geotechnical work). less than 1 m².
1 Subgrade 1 Earth m2 C2
preparation 2 Hard material m2 The subgrade
Standard Method of Measurement ̵ Second Edition
D3
Laterite material shall
be according to the
gradation limits for
gravel surfacing in the
standard specification
for road works as
expressly stated.
3 Roadbase 1 Removal of flexible m2 D4 C5 A3
surfaces The crushed Items for removal of Item description for
2 Crushed m2 aggregates shall be flexible surface shall roadbase shall state
aggregates classified according to be deemed to include the type, grade and
3 Bituminous mix m2 the gradation limits for scarifying the existing thickness of the
4 Wet mix m2 crushed aggregates roadbase before material.
roadbase in the receiving the new
standard specification roadbase material. A4
5 Stabilised roadbase 1 Lime m2 for road works as Item description
2 Cement m2 expressly stated. for stabilised
roadbase shall state
the proportion of
stabilisation agent.
4 Road shoulder 1 Earth shoulder m2 M2 C6 A5
2 Gravel shoulder The areas of sub- Earth shoulders shall Item description
3 Paved shoulders m2 base, road base and be deemed to include for road shoulders
bituminous pavement verge. shall state the size,
m2 courses for road thickness, type and
shoulder shall be material used.
measured under Class
R2**, R3**, and R5*0.
5 Bituminous 1 Removal of m2 D5 C7 A6
pavement courses flexible surface Item surface dressing Item removal of Item description for
2 Prime coat m2 material shall be in flexible surface of bituminous pavement
3 Tack coat m2 accordance with the bituminous pavement courses shall state the
gradation limits for courses shall be type and compacted
bituminous surface deemed to include thickness (where
4 Binder course 1 Asphaltic concrete m2 dressing in the scarifying the existing appropriate)
standard specification exposed surface.
for road works as
expressly stated.
MyCESMM2 | 119
CLASS R: ROADS AND PAVINGS
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
5 Bituminous 5 Wearing course 1 Asphaltic concrete m2 D6 C8 A7
pavement courses 2 Porous asphalt m2 Item bituminous Items for bituminous Item description shall
3 Stone mastic asphalt m2 pavement courses to pavement courses shall state where removal of
4 Gap graded asphalt m2 be read in conjunction be deemed to include flexible surface is to be
5 Polymer modified m2 with JKR Specification cutting of pavement done by milling.
120 | MyCESMM2
(MyCESMM2)
M7
The areas of additional
fabric reinforcement in
laps shall not be
CLASS R: ROADS AND PAVINGS
measured.
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
6 Concrete pavement 3 Carriageway slab m2 C10 A12
4 Other concrete slab m2 Items for carriageway Item description for
slab and other carriageway slab and
concrete slab shall be other concrete slab
deemed to include shall state the grade
trial mix, mixing, and thickness of the
laying, spreading, concrete and type of
formwork, treatment formwork including
at manholes and edge support used.
gullies, compaction,
finishing, curing and
surface texturing. It
also deemed to include
attainment of surface
levels.
5 Joints in concrete 1 Longitudinal joints m M8 D8 C11 A13
pavement 2 Expansion joints m Joints shall be Sleeve joints, Items for joint in Item description for
3 Construction joints m measured at location connectors and the like concrete pavements joints shall state the
4 Warping joints m where they are in bar reinforcement shall be deemed depth of joint.
5 Butt joints m expressly required. shall be classed as to include base
6 Special joints m special joints. preparation, installing A14
7 Transverse joints m dowel bars and tie Item description for
bars, debonding agent, special joints shall
joint sealing material, state the type of joint,
and saw cutting. and type and size of
the reinforcing bar.
6 Pavers 1 Interlocking m2 C12 A15
concrete block Items for pavers shall Item description for
2 Concrete flags m2 be deemed to include pavers shall state type,
3 In situ concrete m2 base preparation, size, thickness and
pavers sand bedding, lay in whether it is precast or
specified interlocking in situ.
pattern, edge segment,
joints and cutting.
7 Kerbs, channels 1 Precast concrete m M9 C13 A16
and edgings kerbs Excavation and filling Items for kerbs, Item description for
2 In situ concrete m for kerbs, channels channels, and edgings kerbs, channels, and
kerbs and edgings shall be shall be deemed to edgings shall state the
3 Concrete edgings m classed as earthworks include beds, backings, type and size.
4 Concrete channels m (Class F). reinforcement, joints
and cutting. A17
Item description for
in situ concrete kerbs,
concrete channels,
and concrete edgings
shall state the use of
slip-form, if expressly
required.
MyCESMM2 | 121
CLASS R: ROADS AND PAVINGS
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
8 Road furniture 1 Signage 1 Non-illuminated nr C14 A18
retro-reflective Post-mounted Item description for
2 Illuminated nr signage shall be signage mounted on
3 Electronic m2 deemed to include gantry shall be so
foundation, support stated.
122 | MyCESMM2
(MyCESMM2)
post, excavation,
preparation of surfaces, A19
Malaysian Civil Engineering
markings 2 Continuous line m Lengths measured The colour of the Item description for
3 Intermittent line m for linear pavement pavement markings, pavement markings
4 Chevron marking m2 markings shall not shall be deemed to be shall state the material
include gaps in white unless otherwise grade, size, and
intermittent line. stated. diagram number taken
from JKR ArahanTeknik
M11 (Jalan) or by other
Area measured for relevant authorities.
chevron marking shall
be the gross area. A21
Item description for
pavement markings
shall state the
shape, type, e.g.
thermosetting plastic,
and colour if required.
A22
Item description
shall sate temporary
pavement markings
and its subsequent
removal.
3 Delineators 1 Chevron nr A23
2 Delineator posts nr Item description for
3 Roadstud nr delineators shall state
the type, size and
colour.
CLASS R: ROADS AND PAVINGS
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
8 Road furniture 4 Traffic barrier 1 New Jersey barrier m M12 C15 A24
2 Wire rope m The length of traffic Items for guardrail Item description for
3 Guardrail m barrier shall be and wire rope shall be traffic barrier shall
4 Guardrail nr measured overall, no deemed to include the state excavation in
end-treatment deduction shall be supply and installation rock, where applicable.
5 Pedestrian barrier m made for the gaps for of corrugated guardrail
6 Concrete barrier nr street lightings poles, beam and wire rope A25
sign and gantries. inclusive of bolts, Item description for
nuts, posts, and other New Jersey barrier
ancillary work. shall state the type and
dimension.
C16
Items for guardrail A26
end-treatment shall be Item description for
deemed to include the New Jersey barrier
supply and installation shall state the use of
inclusive of bolts, slip form, if expressly
nuts, posts and other required.
ancillary work.
A27
Item description of
guardrail shall state the
type and thickness of
beam element, type of
post, and post spacing.
A28
Item description
for guardrail end-
treatment shall state
the type of treatment.
MyCESMM2 | 123
CLASS R: ROADS AND PAVINGS
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
8 Road furniture 5 Miscellaneous 1 Crash cushion nr C17 A29
2 Crash barrier nr Items for crash Item description of
3 Kilometre post nr cushion, crash barrier, crash cushion, crash
4 Hectometre marker nr kilometre post, barrier, kilometre post,
5 Anti-glare screen m hectometre marker, hectometre marker,
124 | MyCESMM2
(MyCESMM2)
MyCESMM2 | 125
ADDITIONAL
CLASS S: TUNNEL WORK MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
126 | MyCESMM2
(MyCESMM2)
acceptance test,
External drainage system (included in Class Q: Drainage work).
assembly and
Malaysian Civil Engineering
Excavation, filling, and turfing for external work (included in Class F: Earthworks). transportation to site
Cut and cover tunnel (included in Class F: Earthwork and Class I: Concrete work). including maintenance
cost.
Temporary wastewater treatment facility (included in Class B: Environmental
protection and enhancement).
Ground investigation (included in Class D: Site investigation work).
Relocation of services (included in Class E: Demolition and site clearance and
Class O: Pipework).
Standard Method of Measurement ̵ Second Edition
MyCESMM2 | 127
CLASS S: TUNNEL WORK
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
2 Plant and 4 Transportation 1 Locomotive and sum C8
equipment system rolling stock Items for locomotive
2 Multi service vehicle set and rolling stock shall
3 Conveyor belt set be deemed to include
system the rail for transport of
128 | MyCESMM2
(MyCESMM2)
C12
Items for excavation
shall be deemed to
include over break and
backfill with concrete,
CLASS S: TUNNEL WORK
A14
Item description for
shotcrete reinforced
with fibres, shall state
the dosages of the
fibres added to the mix.
MyCESMM2 | 129
CLASS S: TUNNEL WORK
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
4 In situ lining 3 Reinforcement 1 Mild steel bar t M5 D2 C16 A16
2 High tensile steel t The mass of steel The nominal diameter Items for reinforcement Item description for bar
bar reinforcement shall be stated in item shall be deemed to reinforcement shall state
3 High tensile steel m2 taken as 0.785 kg/m per description for bar include labour for the size of the bars.
fabric 100mm² of the cross- reinforcement shall cutting, bending, and
130 | MyCESMM2
(MyCESMM2)
special chairs.
M7
The areas of additional
fabric reinforcement
in laps shall not be
measured.
4 Formwork m2 M8 C17
Formwork shall be the Items for formwork
nett surface of in situ shall be deemed to
concrete. include travel steel
form for all inclinations,
alignment and end form
to the construction joint
form for all inclinations,
alignment, and end form
to the construction joint.
C23
Items for annulus
grouting shall be
deemed to include
corrosion protection,
stiffener, fish tails, and
purpose made holes.
6 Tunnel support 1 Steel support 1 Steel rib t M13 C24 A22
The areas of additional Items for the steel Item description for
fabric reinforcement support shall be steel support and
in laps shall not be deemed to include all lagging shall state
measured. necessary accessories the dimensions and
such as tie rod, end nominal mass.
plate, bolts and nuts.
2 Lagging 1 Steel section t A23
2 Steel plate t Item description for
3 High tensile steel m2 permanent tunnel
fabric reinforcement support shall be
measured separately.
MyCESMM2 | 131
CLASS S: TUNNEL WORK
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
6 Tunnel support 3 Bolting 1 Rock dowel nr C25 A24
2 Rock bolt nr Items for bolting shall Item description for
3 Pull out test nr be deemed to include bolting shall state the
all provision as expressly length and diameter.
required.
132 | MyCESMM2
(MyCESMM2)
A27
Standard Method of Measurement ̵ Second Edition
A28
Item description for
canopy tube system shall
state length, diameter
and thickness of tube.
7 Backfill 1 Invert 1 Concrete m3 M15 A29
2 Behind lagging 2 Shotcrete m3 Volume for backfill shall Item description for
3 Other underground 3 Mortar m3 be the nett dimension invert shall state the
space 4 Grout m3 of volume to be filled. principal dimension.
5 Tunnel muck m3 Backfill to over break
shall not be measured.
M16
Item for backfill behind
lagging shall be the
nett volume of gap
between the lagging
and the nett excavation
profile.
8 Tunnel 1 Convergence nr C26 A30
Instrumentation measurement Items for tunnel Item description for tunnel
2 Settlement nr instrumentation shall be instrumentation shall state
deemed to include all the specification detail.
measurement
provision and accessories
3 Stress 1 Strain gauge nr as expressly required.
measurement 2 Pressure cell nr
3 Inclinometer nr
4 Pneumatic nr
piezometer
CLASS S: TUNNEL WORK
CLASS T
RAIL TRACK
MyCESMM2 | 133
ADDITIONAL
CLASS T: RAIL TRACK MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
134 | MyCESMM2
(MyCESMM2)
Geotextile and geogrid (included in Class G: Geotechnical work). components to site. required.
Concrete track foundations (included in Class I: Concrete work).
Malaysian Civil Engineering
3 Sleepers 1 Timber nr A5
2 Concrete nr Item description for
3 Steel nr supplying of sleepers
4 Special type nr shall state the type,
size and identify
the fittings which
are attached by the
supplier.
CLASS T: RAIL TRACK
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
1 Supplying 4 Conductor 1 Mass, not exceeding m C2 A6
rails 20 kg/m Items for supplying Item description for
2 Mass, 20 - 30 kg/m m of conductor rails supplying of conductor
3 Mass, 30 - 40 kg/m m shall be deemed to rails shall state the
4 Mass, 40 - 50 kg/m m include guard boards, type.
5 Mass, exceeding m fixings, bolts, nuts,
50 kg/m screws, washers,
insulating bushes,
cable terminals, rail
insulators, rail supports,
rail expansion joints,
ramps (high/low
speed), covers and
packing.
5 Fittings 1 Chairs nr M4 C3 A7
2 Baseplates nr Fishplates and Items for supplying Item description for
3 Rail fastenings nr rail joints shall be of fittings shall be supplying of fittings
4 Plain fishplates nr measured by number deemed to include shall state the type.
5 Insulated fishplates nr of pairs. fixings, keys, clips,
6 Insulated rail joints nr washers, bolts, nuts,
7 Glued insulated rail nr screws, insulating
joints bushes, spikes, ferrules,
track circuit insulator,
shoulders, pads, shims,
baseplates, inserts and
packing.
6 Turnouts set C4 A8
7 Diamond crossing set Items for supplying of Item description for
turnouts and diamond supplying of turnouts
crossing shall be and diamond crossing
deemed to include shall state the type,
timbers, fittings and type of joint and
check rails. length.
2 Supplying 1 Sundries 1 Buffer stops nr A9
2 Wheel stops nr Item description for
3 Lubricators nr supplying of sundries
4 Switch levers nr shall state the type
5 Rail expansion joints pr
6 Jumper cables nr A10
7 Traction rail bonds nr Item description for
8 Signalling rail bonds nr supplying of buffer
2 Sundries 1 Stray current nr stops shall state their
continuity cables approximate weight.
2 Cross track ducts nr
A11
Item description for
supplying of cross track
ducts shall state their
duct size and length.
MyCESMM2 | 135
CLASS T: RAIL TRACK
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
2 Supplying 3 Rail furniture 1 Kilometers markers nr A12
2 Change of nr Item description
geometry, for supplying of rail
horizontal and furniture shall state the
vertical markers type.
136 | MyCESMM2
(MyCESMM2)
3 Turnout markers nr
4 Track slab markers nr
Malaysian Civil Engineering
5 Conductor rail nr
support marker
6 Fouling point nr
markers
7 Level crossing nr
4 Cable trough 1 In situ m C5 A13
2 Precast m Items for supplying Item description for
of cable trough shall supplying of cable
be deemed to include trough shall state the
Standard Method of Measurement ̵ Second Edition
MyCESMM2 | 137
CLASS T: RAIL TRACK
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
3 Laying 5 Fittings 1 Chairs nr M10 C12 A21
2 Baseplates nr Fishplates and Items for laying Item description for
3 Rail fastenings nr rail joints shall be of fittings shall be laying of fittings shall
4 Plain fishplates nr measured by number deemed to include state the type.
5 Insulated fishplates nr of pairs. fixings, keys, clips,
138 | MyCESMM2
(MyCESMM2)
A26
Item description for
laying of cross track
ducts shall state their
duct size and length.
CLASS T: RAIL TRACK
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
4 Laying 2 Sundries 1 Stray current nr
continuity cables
2 Cross track ducts nr
MyCESMM2 | 139
CLASS T: RAIL TRACK
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
5 Dismantling 1 Flat bottom rails 1 Plain track m M12 C19 A30
2 Turnouts nr The length of Items for dismantling Item description
3 Diamond crossings nr dismantling of shall be deemed to for dismantling of
plain track shall be include taking up, work from which
measured along the lifting, packing and the materials arising
140 | MyCESMM2
(MyCESMM2)
A33
Where extra ballast
is required, item
description for
dismantling shall be
stated.
CLASS T: RAIL TRACK
CLASS U
MECHANICAL AND
ELECTRICAL WORK
MyCESMM2 | 141
ADDITIONAL
CLASS U: MECHANICAL AND ELECTRICAL WORK MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
142 | MyCESMM2
(MyCESMM2)
Valves (included in Class O : Pipework). respective employer’s and install all fittings type of services and
specification. and accessories and reference to the
Malaysian Civil Engineering
2 Conduits 1 Plain m
2 Flexible m
3 Box fittings nr
CLASS U: MECHANICAL AND ELECTRICAL WORK
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
2 Cabled services 3 Final circuit 1 Cable only m C4
2 Cable and conduit m Items for lighting/
3 Lighting/power point nr power point deemed
4 Trunking 1 Plain m to include the cable,
2 Fittings m cable containment,
3 Busbar trunking m and other necessary
accessories.
5 Earthing and 1 Tape m
bonding 2 Fittings nr
6 Accessories 1 Trays m
2 Switches nr
3 Lighting outlets nr
4 Sockets nr
3 Air conditioning 1 Direct expansion 1 Window AC unit nr
and mechanical system air 2 Single Split nr
ventilation conditioning Compressor
3 Multi Split nr
Compressor
4 Fan Coil nr
5 Air Handling Unit nr
2 Precision air 1 Direct expansion nr
conditioning 2 Chilled water nr
3 Centralised system 1 Air side handling unit nr
air conditioning 2 Air side fan coil unit nr
3 Chiller nr
4 Cooling tower nr
5 Water treatment nr
system
4 Fan 1 Propeller nr D4 A4
2 Axial nr Items for fan shall be Item description for fan
3 Forward curved nr categorised as radial/ shall state the rating.
impeller propeller, centrifugal
4 Backward curved nr axial, centrifugal
impeller forward, etc.
5 Radial type impeller nr
6 Airfoil type impeller nr
5 Accessories 1 Insulation m2 C5
2 Filter nr Items for grilles shall
3 Diffuser nr be deemed to include
4 Air grille nr termination box, air
5 Acoustic grille nr dampers (where
6 Variable volume box nr relevant) and with
7 Silencers nr or without acoustic
8 Louvers nr insulation.
6 Dampers 1 Fire damper nr D5
2 Volume control nr Items for fire damper
3 Isolation nr shall be categorised as
electric actuator, fusible
link or pneumatic.
MyCESMM2 | 143
CLASS U: MECHANICAL AND ELECTRICAL WORK
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
4 Fire fighting 1 Portable fire 1 Dry powder nr
extinguisher 2 Carbon dioxide nr
3 Others nr
2 Fire detection and 1 Conventional/ sum A5
alarm system addressable Item description for
144 | MyCESMM2
(MyCESMM2)
C10
Items for landing valve
deemed to include
CLASS U: MECHANICAL AND ELECTRICAL WORK
coupling.
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
5 Piped services 1 Accessories 1 Pressure vessel nr M2 C11 A7
2 Multimedia filter nr Piped services Items for piped Item description for
3 Particle diverter nr measured over all pipe services shall piped services shall
4 First flush device nr fittings, short running be deemed to include state diameter and
5 Basket strainer nr lengths and branches all fittings, jointing, jointing method
6 Oil & grease nr in linear metres. fixing and perforating
Interceptor the pipe or flange. A8
Item description for
2 Pipework 1 Cold water sum M3 C12 purpose made and
plumbing system Item description for Items for storage tank bare piped services
2 Soil and waste sum flexible pipes and shall be deemed to shall be stated.
plumbing system extensible pipes include supporting
3 Sanitary appliances sum (measured as fully frame. A9
and fittings extended) shall be Item description for
4 Recycle water sum stated. pipework in or fixed
plumbing system in ducts, trenches and
5 Rain water sum chases or embedded
harvesting system in in situ concrete or
6 Gas pipe sum screeds shall be stated.
7 Storage tank nr
3 Septic Tank 1 Cast in situ concrete nr C13 A10
2 Pre-fabricated nr Items for septic tanks Item description for
shall be deemed to septic tank shall state
include foundation, the capacity in term of
excavation, upholding population.
sides of excavation,
bedding, installation,
backfilling and all other
related work where
expressly required.
6 Electrical services 1 High voltage (33 kV 1 Cables/ sub-main m M4 D8 C14 A11
and above) 2 Compact nr The acoustic system for The electrical services Items for uninterruptible Item description for
incoming services/ sub-station generator room shall be standby equipment electrical power supply electrical services shall
main installation 3 Metering kiosk nr measured separately supplied and installed supplied and installed state the spacing and
4 Final sub-circuits nr under their respective shall be inclusive shall be deemed to voltage.
5 Ducts and nr classes of work. of diesel generator, include of batteries,
2 Medium voltage
manholes alternator, Automatic UPS module, coupling
(1 kV up to 33 kV)
6 Lightning nr Mains Failure (AMF) panels, isolation
main installation
protection/earthing panels and all other transformer and
required accessories. all other required
accessories.
3 Low voltage
(up to 1 kV) M5 D9 C15
main installation Electronic motor starter The electrical services Items for electrical
shall be measured in voltage categorisation services shall be
number inclusive of shall be in accordance deemed to include
enclosure and all other to IEC classification. supporting brackets,
required accessories covers, tap-off/feeder
where expressly stated. units, fire barriers,
earthing conductors,
MyCESMM2 | 145
CLASS U: MECHANICAL AND ELECTRICAL WORK
cable termination.
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
6 Electrical services 4 Extra low voltage D10 C16
(below 50 V) All incoming electrical Items for incoming
services and main electrical services shall
installation shall be deemed to include
be described in connection cable ends
146 | MyCESMM2
(MyCESMM2)
C17
Items for electrical
services shall be
deemed to include
ratings, capacity, type,
configuration (1/2 way
switches, single or
gang switches, switch
Standard Method of Measurement ̵ Second Edition
C18
The lightning
protection/ earthing
installation shall
include all the
necessary excavation,
concrete pit, make
good, copper rod/earth
materials to achieve
the desired ohmic
value.
5 System 1 Multi-media set C19
Visual system Items for system shall
2 Perimeter security set be deemed to include
system supporting brackets,
3 Intelligent tunnel set cable termination,
emergency ancillary works and
evacuation system all other required
4 Audio-visual system set accessories.
6 Accesssories 1 Light fittings nr C20
2 Street Lighting nr Items for accessories
3 Traffic Light nr shall be deemed to
include supporting
brackets, covers, cable
termination, ancillary
works and all other
required accessories.
CLASS U: MECHANICAL AND ELECTRICAL WORK
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
6 Electrical services 7 Equipment 1 Generator set nr M6 C21 A12
2 UPS nr The UPS room for wet Items for UPS supplied Item description for
3 Transformers nr battery cell shall be and installed shall be standby equipment
4 Variable Speed nr measured separately deemed to include shall be stated.
Drive/Variable under respective batteries, UPS module,
Frequency Drive classes of work where coupling panels,
5 Soft starter nr expressly required. isolation transformer
6 Switch gear nr and all other required.
7 Standby nr
8 Low Voltage nr
enclosure
7 Communication 1 Telephone system 1 Private Automatic set C22
Branch Exchange Items for
(digital/analogue) communication shall
2 Local area network set be deemed to include
3 Wireless local set supporting brackets,
area networking cable termination,
ancillary works and
all other required
accessories.
2 Supervisory Control set C23
and Data Items for Supervisory
Acquisition System Control and Data
3 Programme Logic sum Acquisition System
Control (SCADA), Programme
4 Telemetry system sum Logic Control (PLC)
5 Close Circuit sum and Close Circuit
Television Television (CCTV) shall
be deemed to include
all accessories.
8 Mechanical work 1 Equipment and 1 Static screen nr D11 C24
appliances 2 Automatic screen nr Static screen is a Items for static screen,
3 Non-static screen nr screen that is fixed or automatic screen
stationary condition. and non-static screen
shall be deemed to
D12 include all design,
Non-static screen endorsement, capacity,
is a screen which material, system,
is designed to be supply, install and
movable manually. make good.
MyCESMM2 | 147
CLASS U: MECHANICAL AND ELECTRICAL WORK
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
8 Mechanical work 1 Equipment and 4 Aeration nr D13 C25 A13
appliances Aeration shall be Items for equipment Item description for
classified as air diffuser, and appliances shall aeration shall state the
mechanical aerator, be deemed to include function.
gravity fall weir and design, all fittings and
148 | MyCESMM2
(MyCESMM2)
D15
Items for aeration type
shall consist of but not
limited to air blower
aerator, surface aerator,
brush aerator, fixed
type surface aerator,
submersible aerator,
paddle aerator, ejector,
diffuser, membrane
aerator and etc.
MyCESMM2 | 149
CLASS U: MECHANICAL AND ELECTRICAL WORK
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
8 Mechanical work 2 Equipment and D22
appliances The chemical and
special treatment
process and system
plant type shall consist
150 | MyCESMM2
(MyCESMM2)
permanganate system,
aluminium system, Poly
Aluminium Chloride
(PAC) system, Powder
Activated Carbon
(powder AC) system,
main polymer system,
sludge polymer system,
chlorination system,
scrubber system,
Standard Method of Measurement ̵ Second Edition
A23
Item description for non
mechanical type sludge
treatment facility and
dewatering system
shall state in detail all
related components
type i.e sludge lagoon,
sludge drying bed etc.
inclusive of all necessary
associated works and
integration with other
system.
CLASS U: MECHANICAL AND ELECTRICAL WORK
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
8 Mechanical work 2 Equipment and 6 Lifting equipment nr D24 C32 A24
appliances The lifting equipment The motorised or Item description for
is a specific system non motorised lifting lifting equipment shall
of hoisting apparatus equipment shall be state the type capacity,
travelling overhead deemed to include function, motorised,
for lifting and hoisting all required design, manual, electric current
other equipment and is drawings, endorsement, requirement for the
designed to carry the supply, deliver, motor, power supply,
specific load. installation, testing, motor and switch
fittings, accessories and controller.
D25 any modification works
The lifting equipment including associated
shall be categorised as works with other
motorised or manual. components.
C33
The installation of
lifting equipment shall
be deemed to include
obtaining the PMA
Certificate from DOSH.
MyCESMM2 | 151
CLASS U: MECHANICAL AND ELECTRICAL WORK
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
8 Mechanical work 3 Equipment and 1 Other equipment nr D26 A28
appliances and accessories Items for other Item description for
equipment and other equipment and
accessories shall accessories shall state
be categorised but the function.
152 | MyCESMM2
(MyCESMM2)
D28
Item for non-
rotating equipment
shall include but
not limited to tube
diffuser, universal/
flexible coupling/
adaptor, analyser rack,
laboratory equipments,
headstocks/ spindlers,
portable actuator,tools
and spare parts etc.
MyCESMM2 | 153
CLASS U: MECHANICAL AND ELECTRICAL WORK
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
8 Mechanical work 6 Pumps 1 Positive nr M9 D32 C38 A32
displacement Item for replacement Pumps shall be Items for pumps Item description for
2 Dynamic nr of motor to be stated categorised to type of shall be deemed to motor shall state the
3 Special nr separately when pumps ie dosing pump, include all fittings and type of motors, power
4 Diesel nr expressly required. metering pump, jet accessories and any capacity.
154 | MyCESMM2
(MyCESMM2)
D35
Special pump is
the pumps that is
determined to be used
for special purpose
other than positive
displacement and
dynamic pump.
D36
A motor is a machine
which converts electric
energy into mechanical
energy which
categorised under
synchronous (plain and
super) and induction
(squirrel cage and slip
ring) motors.
CLASS U: MECHANICAL AND ELECTRICAL WORK
CLASS V
MISCELLANEOUS
WORK
MyCESMM2 | 155
ADDITIONAL
CLASS V: MISCELLANEOUS WORK MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
156 | MyCESMM2
(MyCESMM2)
1 Fences 1 Timber m M1 C1 A1
2 Metal m The length of fences Items for fences and Item description for
3 Chain link m shall exclude lengths gates shall be deemed fences and gates
4 Barb/bladed wire m occupied by gates. to include excavation, shall state the types,
5 Composite material m foundation, preparation dimensions and size of
6 Concrete m of surfaces, type of foundations.
7 Precast concrete m finishing, disposal of
panel excavated material, A2
upholding sides of Item description for
Standard Method of Measurement ̵ Second Edition
2 Gates nr C2 A3
Items for fences shall Item description for
be deemed to include fences shall state the
all posts and their types of metal and
foundation. grade of timber used.
C3 A4
Items for chain link shall Item description for
be deemed to include chain link shall state
all posts, raked angle, the size, gauge and
straining wires, barb protective coating of
wires, kerbs where wire mesh.
applicable and their
foundation. A5
Item description for
C4 gates shall state number,
Items for gates shall size of leaf and type of
be deemed to include finishing.
posts and foundations,
hinges, bolts, rollers, A6
lockplates and all Item description for
necessary welding. gate shall state the
mode of operation.
C5
If mode of operation of
gate is automatic, the
items shall be deemed
to include the control
system.
CLASS V: MISCELLANEOUS WORK
ADDITIONAL
FIRST DIVISION SECOND DIVISION THIRD DIVISION UNIT MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
3 Signage for 1 Painting of logos nr C6 A7
buildings and tanks 2 External signage nr Items for internal and Item description for
3 Internal signage nr external signage shall painting of logo shall
be deemed to include state the location,
fixing cost. name of logo, and the
type of paint.
A8
Item description for
external and internal
signage shall state the
type of material, size
and location.
MyCESMM2 | 157
CLASS V: MISCELLANEOUS WORK
Malaysian Civil Engineering
Standard Method of Measurement
(MyCESMM)
158 | MyCESMM2
CLASS W
PROVISIONAL AND
PRIME COST SUM
MyCESMM2 | 159
ADDITIONAL
CLASS W: PROVISIONAL AND PRIME COST SUM MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
DESCRIPTION RULES
160 | MyCESMM2
(MyCESMM2)
sums item shall be cost sum’ is defined sums shall be deemed provisional sums and
followed by an item as a sum provided to include allowances prime cost sums shall
for attendance and for work or services to programme, plan identify the work
percentage for profit. to be executed and price the works included.
by a nominated within the tenderer’s
M2 sub-contractor, a general items.
Where provisional and government or a
prime cost sum form a statutory authority or
separate bills in the bill for materials or goods
of quantities, this item to be obtained from
Standard Method of Measurement ̵ Second Edition
D2
The term ‘provisional
sum’ is defined as a
sum provided for work
or for costs which
cannot entirely be
foreseen, defined or
detailed at the time the
3 Prime cost items 1 Item stated sum tender documents are
2 Attendance sum issued.
3 Profit %
D3
Item stated is the
item identified to
be measured as
provisional sum or
prime cost sum.
CLASS W: PROVISIONAL AND PRIME COST SUM
BIBLIOGRAPHY
MyCESMM2 | 161
Malaysian Civil Engineering
Standard Method of Measurement ̵ Second Edition
(MyCESMM2) BIBLIOGRAPHY
BIBLIOGRAPHY
[1] Civil Engineering Standard Method of Measurement, Fourth Edition, CESMM4 (UK),
Institution of Civil Engineers and the Civil Engineering Contractors Association, 2012
[5] Malaysian Standard Method of Measurement for Civil Engineering Works, CESMM,
Construction Industry Development Board (CIDB), 2003
[6] Malaysian Standard Method of Measurement for Civil Engineering Works, MyCESMM,
Construction Industry Development Board (CIDB), 2011
[7] Malaysian Standard Method of Measurement of Building Works, Second Edition, SMM2,
Instituitionsof Surveyors Malaysia (ISM), 2000
162 | MyCESMM2
ACKNOWLEDGEMENTS
MyCESMM2 | 163
Malaysian Civil Engineering
Standard Method of Measurement ̵ Second Edition
(MyCESMM2) ACKNOWLEDGEMENTS
ACKNOWLEDGEMENTS
Members of Technical Committee on Construction Practices
Ms. Nur Mastura Sahran (Secretary) Construction Industry Development Board Malaysia
Ir. Ahmad Redza Ghulam Rasool Ministry of Urban Wellbeing, Housing and Local Government
Ir. Roslan Mat Sapri Ministry of Urban Wellbeing, Housing and Local Government
Ir. Tiah Oon Ling Real Estate and Housing Developers’ Association Malaysia
Mr. Kamal Pasha Mokhtar Real Estate and Housing Developers’ Association Malaysia
164 | MyCESMM2
ACKNOWLEDGEMENTS
ACKNOWLEDGEMENTS
Members of Working Group on Malaysian Standard Civil Engineering Standard Method of Measurement
Datuk Ir. Abdul Kadir Mohd Din (Chairman) Ranhill Capital Sdn Bhd
Prof. Ir. Dr. Hajjah Siti Hawa Hamzah Board of Engineers Malaysia
Mr. Abdul Rahim Abdul Salam Indah Water Konsortium Sdn Bhd
Mr. Ahmad Hafizullah Amir Ahmad Razali Suruhanjaya Perkhidmatan Air Negara
The work of analysing the comments, suggestions and drafting of this Malaysian Standard was undertaken by Sr Hajjah Sabaria
Datuk Haji Hassan and Sr Jailani Jasmani from JUB Central Sdn Bhd. The committee is indebted to the above mentioned experts
for their invaluable advice and assistance throughout.
MyCESMM2 | 165
© Copyright 2018
All rights reserved. No part of this publication may be reproduced or utilised in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without
permission in writing from the CIDB Malaysia.