WAFU Model TUR 50/63/63A
20'+25" Heavy Duty Lathes
ale an —
STANDARD FEATURES * Modern Heavy-duty construction with double-
walled bed
* Choose from 2 3/4", 3 1/2”, or 5 1/2” spindle '* Unique double V-ways for precise carriage
bore with camlock nose (D1-8", D1-11") movements:
'* 4-way rapid traverse with “Come-Along” -* Reversible leadscrew for “Double” threading life.
tailstock * Heavy duty 2-speed 10 and 15 H.P. main drive.
* Hardened and ground gears and bedways motor (18 H.P. on 63A)
'* Preselectable spindle speed changing * Inch/Metric cross screw dial
POLAMGO
POLISH-AMERICAN MACHINERY CORPORATIONWAFUM 2025" Heavy Duty Lathes
The only choice
for those who know value!
Designed and built to give you
the dependability expected only from
‘much higher priced machines. Every machine is
100% quality control checked to insure long life,
precision production and a minimum of maintenance.
‘The WAFUM is an amazingly versatile machine. Besides being
offered in several bed lengths in 20" or 25" swings with 23/4" or 3 1/2"
spindle bore, itis available in a thru-spindle model with 5 1/2” spindle bore, We
sincerely believe dollar for dollar, the WAFUM Is the most modern, rugged, and quality
plus machine available on the market today. Compare the features and prics, ..we think
you'll agree.
BED
The heavy ribbed double walled bed of the TUR series assures a solid foundation to,
resist the bending and torsional forces created by the cutting process. All four integral
bbedways are induction hardened (to minimum 48 HRC) and precision ground. Bedway
cchutes lead chips into open pans at rear of lathe for easy waste removal. All models are
built with three pedestal supports for amazing rigiaity.
TUR 63A-5 1/2”
Spindle Bore
With the WAFUM 25" Hollow spindle
Lathe, available in 80” or 120" be., it's
Possible to machine parts. that’ are
‘considerably longer than usual. Powered
by aheavy duty 18 H.P. main drive motor
the 63A will accept work up to § 1/2” in
diameter with 18 spindle speeds ranging
from 224-1120 RPM. By extending long
work through the large spindle and
‘machining at only one end, a much more
costly long bed lathe is not required. A
center adapter can be easily used for
Conventional betweer-center operations,
Spindle nose, front and rear is standard
1-11" camiock mounting. The 63A
spindle is supported by two heavy duty
preloaded, precision “TIMKEN”
tapered roller bearings at the
c front and the rear, Front
rear spindle bearings capable of
‘withstanding 20,600/19,500 Lbs of radial
load and 16,800/14,700 Lbs of thrust load
‘at 500 RPM.
Specifications and description of the
TUR series lathes applies regarding the
headstock, feedbox, carriage, bed, tall:
stock, and electrics except for those
shown here and on the last page of this
brochure,
HEADSTOCK TUR 50/63-
23/4” & 3 1/2” Spindle Bore
The WAFUM single casting headstock
provides maximum power for roughing
‘or smoothness for finishing operations.
‘Choose from 20” or 25" swing and 23/4"
(0F3 1/2" spindle bore to fit your specific
Job and budget. The spindle Is hardened
and precision ground with a camiock
nose (D1-8") for the quickest most accu-
rate mounting of chucks.
The mechanical preselector_ makes
spindle speed changing quick and easy.
You simply dial in your next spindle
speed (while still cutting), stop the
spindle and pull clutch lever—as fast as
that you are ready to begin cutting at a
FEEDBOX
This universal goarbox was_ designed
with your operator in mind. The quick-
change box allows selection of 42 feeds
land a comprehensive range of inch,
metric, module or diametral pitch threads
without changing quadrant gears. All
‘gears are shaved, case hardened and
‘ground. The gearbox is automatically
lubricated froma reservoir
new speed. Total shi
six seconds!!!
‘The spindle is supported on two double
row precision SKF roller bearings and
two high-precision thrust bearings. All
(gears are hardened and supported in
anti-friction bearings. Two mechanically
activated multiple disc clutches and an
electric brake provide fast smooth stop-
ping of the spindle,
Heavy-duty 2 speed 10 and 15 H.P. main
drive motor allows you to choose 21
9 time: about
CARRIAGE AND APRON
The carriage must provide guidance of
the tool and absorption of cutting forces
Into the bed. The WAFUM carriage
boasts a full 24" bearing surface thereby
resulting in less wear and more accu:
racy. WAFUMS double V-ways assure
precise carriage movements under every
cutting condition. 4-way rapid traverse
to the carriage and cross slide assures
faster tool positioning, tool retraction
and carriage return. Apron and cross,
feed handwheels automatically disen:
‘gage during traverse. Easy to read dials,
and levers have been redesigned to pro:
vide the ultimate ease in gripping. A
three-position spindle lever at the car
riage and headstock provides smooth
starting or stopping of spindle rotation
(orward or reverse). The rearof the cross
slide has parallel T-slots for mounting a
rear tool post.
Compensation for wear is provided by
adjustable gibs. The automatic \ubrica
tion within the apron supplies filtered oil
toll moving parts in the apron,
The leadscrew, used only for chasing
threads and leads is “reversible”, there-
fore “doubling” the life of the screw. The
80" and 120" machine are equipped with
travelling rod supports which are auto-
matically picked up and dropped off.
Safety interlocks prevent simultaneous
engagement of the feeds or threading
‘mechanism. Adjustable overload clutches
in the apron and on the feed rod prevent
damage to the machine in carriage
related accidents
different speeds ranging from 18 to 1800
RPM, The motor is mounted near ground
level thus dampening vibration to the
headstock. Pushbution controls and
speed selection levers are conveniently
located at the front of the headstock.
Low control circuiting insures operator
safety.
‘An automatic lubrication system circu:
lates filtered oll from the reservoir below
‘and splash lubricates all gears, shafts
and bearingsTAILSTOCK
The WAFUM talistock can be coupled to the carriage for
rapid movement thereby considerably reducing set-up
times. One lever lock releases the tallstock from carriage
and positively clamps the tallstock to the bed (in one easy
motion).
Tallstock is furnished with dead centers—the 3 1/2" dia
quill Is hardened and lapped, with more than 8" travel
‘graduated in inch and metric. Drill election is either by
spindle retraction or tang slot. Cross adjustment provides
for alignment and taper turning,
ELECTRICS
Conveniently mounted electrical cabinet is built to JLC.
Standards, featuring U.L. approved relays, contactor and
fuses. All necessary safety guards and limit switches are
standard,
‘TUR 50/63/63A SPECIFICATIONS
au
TUR SO
capacity =
Swing over Bed 20"
‘Swing over Carriage a412
Distance between centers, 40", 60", 80", 120°
Bed width im
HEADSTOCK
No.of Pre-select spindle speedsirange 21/18-1800 RPM
Main drive motor 2speeds
230Vi460V'3 phase/6OHz 108 15HP,
Spindle bore 234"
Spindle nose—camlock type Dre"
Spindle nose, internal taper, 80mm
TAILSTOCK s
Length, bearing on ways 13"
Quill diameter 312"
Quill travel (inch/Metric gradation) 8
Spindle, Morse taper 5
Off-set for taper turning = 1"
CARRIAGE
Length, bearing on ways 24"
Bridge, width o
Gross slide travel 12112"
‘Compound rest travel 6"
Rapid travel (1/3 H.P. motor) 2201PM
FEEDS AND THREADS
No. of Feeds 42
Longitudinal feed range (0031 0.121 IPR
Cross feed range (0016 to.060 IPR
No. Metric threads/range 42/1-88mm,
No. Inch threads/range 4211-88 TP
No. modular threads/range 4211-88mm,
No. diametralpitchirange 4211-88
Leadscrew —diameter and pitch 15/8" 114"
WEIGHT (Approx),
Net: Shortest centers 40"-6500 Lbs
25" 25"
TUR 6S TUR 63A
2a12" 26112"
1412" 1412"
60", 80", 120" 80°, 120"
a aw
2018-1800 RPM 19/22.4-1120
2epeeds Dual voltage
108 15HP, 18H.
312" 51/2"
brat Drie
100mm 160mm
13" 13"
312" 312"
8 8
5 5
#1 = 12"
2a" 24"
9" o”
12112" 12412"
6" 6"
2201PM 201PM
a2 42
10031 10.121 IPR 10031 10.121 PR
(0018 to 060 IPR {0018 to .060 IPR
42/1-88mm 4211-88mm
4211-88 TPI 49 112.88 TP
4211-88mm 42/1-88mm,
421-88 221-88
1518" 114" 1518" x 114"
{add 560 Lbs for each additional 20" of bed length)
POLISH-AMERIGAN MACHINERY CORPORATION foi3s225
755 Greenies! Avenue Loganceues
Eh. GroveVilloge 1 50007 eae 02 scars
‘et 3121499:6458 Tolon 25.6119 Bawa