Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

e s | e n | d e | fr | it | p t | n l

PRODUCTS | PROJECTS DOWNLOADS NEWS CONTACT NEWSLETTER BLOG

Emergency lighting International Catalogue

CB Series (230V c.a. / 230V c.a. y 24V c.c.)

The CB series centralised units for emergency lighting in


switched mode or without breaker are designed and built in
accordance with EN 50171. It is a centralised unit with 230
Vac / 24 Vdc output voltages and a maximum power
output of 800 VA, 1250 VA, 2500 VA and 5000 VA.
(Contact Daisalux for information about other outputs).

 Download catalogue of centralised systems for emergency lighting.


 Maximum of 20 output circuits in CB800 and CB1250 units, 40 circuits in Inputs:
CB2500 and 60 circuits in CB5000.  2 auxiliary inputs for remote actions.
 Option of configuring different autonomies for each output circuit.  Communication port for EV-BUS.
 Sealed valve-regulated lead-acid battery (VRLA).  1 x 230 V output for installation of
 High rate battery charge. EV-ALIM bus power source.
 Top-mounted power supply intakes and outlets.

 Control panel for configuration and monitoring of the central battery. Alarms:
 Front-loading mini-USB for PC connection.  5 dry contacts for faults, alarms and

 Ethernet connection with PC for DaisaTest System. central battery status (EN-50171).

 Integration with DaisaTest system for maintenance management (EN-

50172).
 The DBR system can also be installed in ELC-type luminaires.

Connection terminal block Internal operation diagram

CB800/CB1250 outputs

Power supply input

Dry contacts

Wiring diagrams
 Download catalogue of centralised systems for emergency lighting.
Each CB unit output circuit is configured as

"maintained / nonmaintained" and assign this

operating mode to all luminaires without

communication (non-ELC) connected to said

circuits.

If the unit and luminaires are communicated

(ELC), "maintained / nonmaintained" operation


is individually configured in each luminaire and

is independent of the circuit configuration.

The DaisaTest application can monitor and

control an indefinite number of units. No

communication accessory is required.

Reference table

Monitoring unit

Accessories

 Download catalogue of centralised systems for emergency lighting.

You might also like