Selects how the AV receiver will pass HDMI signals to the HDMI The AV receiver will “pass through” the sources HDMI signal when output in standby power mode. in standby. On : Passes the selected HDMI input through the AV receiver’s HDMI Last (Default) : Choose this option to “pass through” the last used output when the AV receiver is in standby power mode. HDMI input video source. Off (Default) : No HDMI signals are passed through the AV receiver’s CBL/SAT / DVD / Blu-ray / GAME / AUX / MEDIA PLAYER / CDz : HDMI output in standby power mode. Choose one of these HDMI sources to be passed through when the AV receiver is in standby. 22HDMI Control zz “Pass Through Source” can be set when any of the HDMI connectors is You can link operations with devices connected to HDMI and assigned to “CD” for the input source in the “Input Assign” (vpage 137) compatible with HDMI Control. setting. On : Use HDMI control function. % Off (Default) : Do not use HDMI control function. • “Pass Through Source” can be set when “HDMI Control” is set to “On” or “HDMI Pass Through” is set to “On”. % • Please consult the operating instructions for each connected device to check 22Power Off Control the settings. Links the power standby of this unit to external devices. • Refer to “HDMI control function” (vpage 105) for more information about All (Default) : If power to a connected TV is turned off independently the HDMI control function. of the input source, power to this unit is automatically NOTE set to standby. • If the “HDMI Control” settings have been changed, always reset the power Video : With an input source being selected that is assigned either to connected devices after the change. “HDMI”, “COMP” or “VIDEO” (vpage 138), when you turn the power of the TV off, power to this unit is automatically set to standby. Off : This unit does not link with power to a TV.