Professional Documents
Culture Documents
Brochure 2020
Brochure 2020
Brochure 2020
HIGH-Tech Enterprise of China Science and Technology Achievement Award National Key New Product Certificate
of China Instrument and Meter Association
Guangzhou Doppler Electronic Technologies Incorporated Company is a high-tech enterprise engaged in R&D,
manufacturing of ultrasonic instruments & transducers (probes),and is committed to provide high-level solutions to the
nondestructive testing industry. The company's products cover phased array instruments, probes, scanners and
automatic systems, with the capability of customize all kinds of special probes, phased array instruments. A variety of
products meet the advanced international level.
Doppler has built production lines with advanced level and passed the ISO 9001: 2008 quality management system Certificate of National CE Certificate Certificate of Adopting Guangdong Province European EN-12668 ISO9001 Quality Managemet
certification, CE certification and EN12668 standard compliance certification. Doppler is the first enterprise that has Torch Program Project International Standard High Tech Product Standard Compliance System Certification
established advanced probe production line, also has developed the domestic first phased array unit. Product Mark Certificate Certificate
Doppler will continue to focus on industrial non-destructive testing industry, promote advanced technology development
and industry standards establishing, and strive to build a high level, diversified modern enterprise.
Culture Strong Technology
Service to the Community for the Benefit to Human Safety and Health Probe elements optional range: 4 ~ 1024 elements
Vision Elements array mode: Linear, Matrix, Concave, 1.5D Matrix, Annular, Internal focused, etc
Creating a World-Class Ultrasound Brand
With the ability to process piezoelectric single crystal composite materials and transducers
Core Values
Phased array instruments and phased array boards
Love, Integrity, Innovation, Dedication
With all kinds of scanners for flat plate, pipe weld and base metal inspection
Philosophy
Pursuit of Excellence——Constantly Improving, and Try the Best!
A high-level of technical team
Honest and Trustworthy——Be Sincerely, and Keep the Promise! World-class equipments
Solidarity and Cooperation——Integrating Resources and Create a Prosperous Business. Innovative production methods
Complete quality management
Conventional UT Probes
Conventional UT Probe Instruction . . . . . . . . . . . . . . . 34 Immersion Probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
40
44
TOFD Probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
High Temperature Probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Air-Coupling Probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
62
64
66
CONTENTS
Angle Beam Probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Custom and Special Probes . . . . . . . . . . . . . . . . . . . . . . . . 68
TRL Angle Beam Probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Probe Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Delay Line Probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
目录 02
Portable Phased Array Flaw Detector
New Upgrades
Support AutoCAD Import Function!
Detector 32/64PR; 32/128PR Receiver/Pulser Channels for Phased Array
Dual Independent Channels for High-performance TOFD Detection
Embedded Focal Law Calculator, which can perform:
Four Kinds of Scanning Modes: Linear, Sectorial, Depth and Static
Four Kinds of Focal Types: True Depth, Sound Path, Projection, and Focal Plane
Optional Display Mode of A / B / S / C, etc
Calibration is more convenient to implement and can be calibrated for each beam
Multiple Groups for Parallel Scanning, comparable to many instruments working simultaneously
Negative Square Wave Pulse, with Resolution up to 2.5ns, PRF up to 20KHz
10.4" TFT LCD Color Touch Screen, Resolution 800×600 Pixel
Detector 02
PhaScan PhaScan II
II
Parameter
PA Channel Conventional Channel PA Channel Conventional Channel
03 Detector Detector 04
Performance
Portable Phased Array Flaw Detector Parameter PA Module Conventional UT
Receiver / Pulser 32/64 1/2
Range 9900μs 9900μs
Flexscan is the latest PAUT Flaw Detector developed by Doppler. It’s a Continuity of Phascan, Configuration
Velocity 635-15240m/s 635-15240m/s
with excellent performance. With 43% volume and 22% weight reduced, also hardware and Focal Law 1024
Test Mode PE / PC PE / PC / TT / TOFD
software optimized, Flexscan is ideal for on-site inspection. Voltage 50V / 100V/130V 100V / 200V / 400V
Pulse Shape Negative Square Wave Negative Square Wave
16/64PR; 32/64PR Receiver/Pulser Channels for Phased Array Pulse Width 30-500ns 30-500ns
Pulser
Rise Time <8ns <8ns
8.4" TFT LCD Color Touch Screen, easy to operate
PRF 20KHz 20KHz
PA, TOFD and Conventional UT can be performed simultaneously Delay 10μs / 2.5ns 10μs / 2.5ns
Multiple Groups for Parallel Scanning, comparable to many instruments Damping N/A 50Ω/200Ω
Gain 0-80dB 0-110dB
working simultaneously
Bandwidth 0.5-15MHz 0.5-20MHz
Fast Calibration of Velocity, Wedge Delay, Sensitivity, TCG and so on Receiver Input Impendance 200Ω 133Ω
Fast Setting of many kinds of Common Weld Graphs Input Capacitance 80pF 60pF
Delay 10μs / 2.5ns 10μs / 2.5ns
Support AutoCAD Import Function
Type Linear/Sectorial NA
Optional Display Mode of A / B / S / C / TOFD / Offline 3D Scan/Display Display Mode A/B/C/S A/B TOFD
New Upgraded Offline Data Analysis Software, more powerful Unit mm / inch mm / inch
Points 16
TCG Dynamic Range 40dB
Max Gain Slope 40dB/μs
DAC Points 16
Gates A/B/I
Gate Threshold 0-98%
Trig Mode Peak / Edge
Report HTML
Data Storage Storage Devices USB Devices / SD Card
Size 8.4 inch
Display Screen Resolution 800*600pixel
Type TFT LCDTouch Screen
USB 2
Internet 10/100M
I/O Port
Video Output HDMI
Encoder LEMO 16-Pin
Language English / Chinese
DC Supply Voltage 15V DC 4A
Power Supply Battery Type Li-ion Battery
Battery Life 4 Hours
Size 296mm×209mm×89mm
Case
Weight 3.5Kg(Without Battery)
05 Detector Detector 06
Performance
Portable Phased Array Flaw Detector Parameter PA Module Conventional UT
Receiver / Pulser 32/128 2/2
Configuration Range 9900μs 9900μs
Velocity 340-15240m/s 340-15240m/s
Test Mode PE / PC PE / PC / TT / TOFD
New Phased Array Flaw Detector Voltage 50V / 100V 100V / 200V / 400V
with TFM/FMC Pulse Shape Negative Square Wave Negative Square Wave
Novascan is a full-featured phased array inspection tool. In Pulser Pulse Width 30-1000ns/2.5ns 30-1000ns/2.5ns
addition to the phased array function and two-channel TOFD Rise Time <8ns <8ns
detection module, it also supports TFM imaging and FMC data PRF 20KHz 20KHz
acquisition. The number of imaging points is 1024 * 1024, which Delay 0-20μs/2.5ns 0-20μs/2.5ns
greatly improves imaging and shows small defects more clearly. Gain 0-120dB 0-120dB
Receiver Bandwidth 0.5-15MHz 0.5-20MHz
Delay 50μs/0.1μs 50μs/0.1μs
Dual Role Sampling Rate 100MHz 100MHz
The Novascan has a FPGA connection interface, and canbe ADC Resolution 10bit 12bit
used as a phased array board, which can transmit the No. of Focal Laws 512 NA
underlying data to the user, making it easier for users such as Data Collection
True Depth/Sound Path/
research institutes and universities to conduct secondary Focusing Type NA
Projection/Focal Plane
development. Detection FW/HW+/HW-/RF FW/HW+/HW-/RF
Type Linear/Sectorial NA
Scan/Display Display Mode A/B/C/S/3D/TopC A/B(TOFD)/C
Powerful 3D View Function Unit mm mm
Support 3D view, defects are visually displayed in 3D
Points 16
workpieces, defect position and size are intuitive and clear, and
it is more convenient for defect judgement. TCG Dynamic Range 40dB
Max Gain Slope 40dB/μs
Report WORD
Powerful Scanning Simulation Data Storage Storage Devices
Size
USB Devices / SSD (Build-in)
10.4 inch
Function Display Screen
Resolution 1024*768pixel
Equipped with a new scan planning process, it can realize 3D Viewable area 211mm*158mm
focus law simulation, multiple groups of simultaneous simulation, Type IPS Capacitive Touch Screen
etc., and greatly simplified the user setting interface. It can help USB 2
to complete the necessary steps such as process simulation and Internet 2;TOP x86,1000Mb/s;Bottom FPGA,1000Mb/s
calibration in the shortest time. I/O Port WIFE 2.4G/5G Dual band,150Mb/s
Video Output HDMI 1.4b
Encoder LEMO 16-pin
More Application Fields Language English/Chinese
The equipment is equipped with a two-dimensional coded
DC Supply Voltage 15V DC 100W
interface, which can realize high-speed two-dimensional
Power Supply Battery Type Li-ion 11.25V/99.6Wh
scanning; it supports DLA and DMA probes, which can be used
Battery Life 4 Hours
for austenitic stainless steel workpiece. With 32 groups for
Size 360mm×260mm×130mm
simultaneous detection and 8 groups displayed on the same Real-time 3D Imaging Multi-group Simulation Case
Weight 7Kg(With Battery)
screen, it is more suitable for complex detection cases.
07 Detector Detector 08
Options Parameter Options Parameter
Extended hardware and software can be provided to redevelop Delay 50μs/0.1μs Power Supply DC Supply Voltage 15V/4.2A
Internet 100/1000M Size 350mmx245mmx55mm
Use for all kinds of automatic phased array ultrasonic I/O Port Case
Encoder LEMO 16-pin Weight 3.4Kg
testing system platform
09 Detector Detector 10
Aircraft CFRP Composite Material Aircraft CFRP Composite R Conner Inspection
(Wheel Probe)) (Concave Probe)
PHASED ARRAY
Ultrasonic Inspection Typical Applications
Electron Beam Welding(AutoCAD Geometric) Wind Turbine Bolt Inspection(Cylindrical Guided Wave)
XY dual-axis inspection of
Circumferential weld inspection of oil and gas pipelines aviation aluminum honeycomb panel
11 Detector Detector 12
Anyscan 30
Ultrasonic Flaw Detector
yscan - 30
An
Performance
Instrument Model
Functions A30
Spike Wave √
Square Wave
Weld Graph Illustration √
Series Storage √
RF √
Chinese/English √
Peak holding √
Envelope √
Surface Amend √
Auto Gain √
DAC √
AVG √
13 Detector
PHASED ARRAY Probes Probe Model Illustration:
1 0 L 6 4 - 0 . 6 x 7 - D 3 - U - 11 0 - 2 . 0 - T 1
Frequency Array No. Pitch Elevation Probe Casing Cable Cable Cable Connector
type elements type type jacket capacitance length type
type (/m)
Ordering Instructions
SD 3 - N 55 S - I H C - AOD 203.2
Wedge Model Illustration:
Wedge Mounting Refraction Wave Irrigation Scanner yoke Adjustable Radius Tube
Conventional Ultrasonic Phased Array transducer frequency is 1MHz ~15MHz. Element quantity is from 8 to 128, custom order can be up type method angle type attachment carbide type diamete
points wear pins
to 1024 elements. In this handbook, contains full information of transducers including Linear(L), Matrix(M), Annular(A), Concave(C), Wedge
Integrated and so on. Other type of transducers can be customized according to customers’requirements. Wedges, connectors, connector
switchs and extension cables also can be customized.
Probe Model Illustration Wedge Model Illustration
Frequency 1=1MHz 2.5=2.5MHz 5=5 MHz 7.5=7.5 MHz 10=10 MHz 20=20 Mhz Wedge Type SXX:Casing type matched to the wedge XX
Array Type L(linear) V(convex) C(concave) M (matrix ) A(Annular) S(special) Mounting Method N=Normal L = Lateral
No. Elements 64=64 Elements Refraction Angle 0=0° 45=45° 55=55°
Pitch 0.6=0.6mm Wave Type S=Share Wave L=Longitudal Wave
Linear(L) Internal Focused(S) 1.5D Array(M) 2D Array(M) Convex(V) Concave (C)
Elevation 7=7mm IHC I=Irrigation
Probe Type D3=D3 Series H =Scaner yoke attachment points
Cable Jacket Type P:PVC U:PU ( Required by nuclear industry ) C =Adjustable carbide wear pins
Cable Capacitance 110=110PF 50=50PF Radius Type AOD= Axial outside diameter ( circumferential scan)
Cable Length 2.0=2m COD=Circumferential outside diameter (axial scan)
Connector Type H1:Hypetronics P1:Omni Connector 160PIN D3:DL-96P Tube Diameter 50=50mm
D1:DL-156P D2:DL-260P M2:MOLEX 160PIN
J1:D38999/26FF35SN M1:MOLEX 78PIN
C1:CONEC 78PIN T1:ITT-cannon QLC260P
Annular(A) Annular Sectorial(S) Variable angle(L) Skew(S) Dual linear(S) Dual 1.5(S)
H L
W
H
L D1 D2 B56 B10
L W
W
5L10-0.6*6 5 10 0.6 6 6 13 0.51 10 0.39 23 0.91 5L32-0.5*10 5 32 0.5 16 10 21 0.83 28 1.10 22 0.87 D2
B54
10L10-0.6*5 10 10 0.6 6 5 13 0.51 10 0.39 23 0.91 7.5L32-0.5*10 7.5 32 0.5 16 10 21 0.83 28 1.10 22 0.87
5L8-0.5*5 5 8 0.5 4 5 12 0.47 20.5 0.81 18 0.71 2.5L16-1.0*10 2.5 16 1.0 16 10 21 0.83 33.5 1.32 38.5 1.52
7.5L8-0.5*5 7.5 8 0.5 4 5 12 0.47 20.5 0.81 18 0.71 B20 4L32-0.5*10 4 32 0.5 16 10 21 0.83 33.5 1.32 38.5 1.52
B10
10L16-0.31*5 10 16 0.31 4.96 5 12 0.47 20.5 0.81 18 0.71 7.5L32-0.5*10 7.5 32 0.5 16 10 21 0.83 33.5 1.32 38.5 1.52
5L16-0.31*5 5 16 0.31 4.96 5 11.5 0.45 11.5 0.45 23 0.91 10L16-1.0*10 10 16 1.0 16 10 21 0.83 33.5 1.32 38.5 1.52
B55
10L16-0.31*5 10 16 0.31 4.96 5 11.5 0.45 11.5 0.45 23 0.91 5L16-0.6*10 5 16 0.6 9.6 10 16 0.63 23 0.91 20 0.79
7.5L16-0.6*10 7.5 16 0.6 9.6 10 16 0.63 23 0.91 20 0.79 B56
10L32-0.3*7 10 32 0.3 9.6 7 16 0.63 23 0.91 20 0.79
Welding, Landing Gears Inspection Reduction or Exemption of Mechanical or Manual Controls 2.25L32-1.0*20 2.25 32 1.0 32 20 36 1.42 36 1.42 28 1.10
D6
Transportation: Composites Delamination & Abhesion, Planks Wedge is replaceable when Immersion method applied 2.25L32-0.8*22 2.25 32 0.8 25.6 22 36 1.42 36 1.42 28 1.10
Conventional: Large Area Scanning,Planks, Sticks, Pipelines 5L128-0.75*10 5 128 0.75 96 10 102 4.02 28 1.10 30 1.18 D7
Thickness Measurement 2.25L64-0.75*10 2.25 64 0.75 48 10 57 2.24 29 1.14 35 1.38
B6
5L64-0.8*10 5 64 0.8 51.2 10 57 2.24 29 1.14 35 1.38
5L64-0.6*10 5 64 0.6 38.4 10 44 1.73 28 1.10 34 1.34 B7
7.5L60-1.0*10 7.5 60 1.0 60 10 68 2.68 26.8 1.06 40 1.57 B23
5L64-1.0*10 5 64 1.0 64 10 84 3.31 35.5 1.40 32 1.26 B26
5L32-0.8*12 5 32 0.8 25.6 12 33 1.30 29 1.14 30 1.18 B40
5L64-0.6*10 5 64 0.6 38.4 10 45 1.77 23 0.91 20 0.79
B57
10L64-0.6*7 10 64 0.6 38.4 7 45 1.77 23 0.91 20 0.79
L64
Specifications and Dimensions
Active Casing Dimensions
Frequency Pitch Aperture Elevation Case
Model Elements (mm) Long (L) Width (W) Height (H) Type
(MHz) (mm) (mm)
mm in mm in mm in
B7 B6/B23/B40 B57 D6
2.25L60-1.0*13 2.25 60 1 60 13 68 2.68 26 1.02 20 0.79
L64
5L60-1.0*13 5 60 1 60 13 68 2.68 26 1.02 20 0.79
2.25L16-1.0*10 2.25 16 1 16 10 21 0.83 33.5 1.32 38.5 1.52
B10
5L32-0.5*10 5 32 1 16 10 21 0.83 33.5 1.32 38.5 1.52
Applications
Small Diameter Pipes Inspection
Thin Pipe or Plate Welds Inspection
Friction Stir Welds Inspection
Limited Space Workpiece Inspection
A36(Top) A36(Side) E19 A37.5
Friction Stir Welds Small Diameter GIS Line Conductor
Pipe Welds
Specifications and Dimensions Specifications and Dimensions
Casing Dimensions
Wedge Active Case Active Casing Dimensions
Frequency Pitch Elevation Case
Model Elements Angle Aperture Long (L) Width (W) Height (H) Frequency Pitch Aperture Elevation
(MHz) (mm) (mm) Type Model Elements Long (L) Width (W) Height (H)
(°) (mm) (MHz) (mm) (mm) (mm) Type
mm in mm in mm in
mm in mm in mm in
5L12-0.5*6 5 12 0.5 36 6 6 18 0.71 13 0.51 19.7 0.78
A36(TOP) 4S16-0.5*10 4 16 0.5 8 10 25 0.98 22 0.87 10 0.39
10L12-0.5*6 10 12 0.5 36 6 6 18 0.71 13 0.51 19.7 0.78
5S16-0.5*10 5 16 0.5 8 10 25 0.98 22 0.87 10 0.39
5L12-0.5*6 5 12 0.5 36 6 6 25 0.98 13 0.51 9.7 0.38 D10
A36(SIDE) 7.5S16-0.5*10 7.5 16 0.5 8 10 25 0.98 22 0.87 10 0.39
10L12-0.5*6 10 12 0.5 36 6 6 25 0.98 13 0.51 9.7 0.38
10S16-0.3*10 10 16 0.3 4.8 10 25 0.98 22 0.87 10 0.39
5L10-0.5*5 5 10 0.5 25 5 5 20 0.79 16 0.63 9 0.35 A25
1.5S16-0.5*10 1.5 16 0.5 8 10 22 0.87 25 0.98 14 0.55
5L12-0.5*6 5 12 0.5 40 6 6 25 0.98 15 0.59 9 0.35 A40
2S16-0.5*10 2 16 0.5 8 10 22 0.87 25 0.98 14 0.55
4L16-0.5*9 4 16 0.5 37.5 8 9 27 1.06 16.5 0.65 22 0.87 D94
A37.5 2.25S16-0.5*10 2.25 16 0.5 8 10 22 0.87 25 0.98 14 0.55
2L8-1.0*9 2 8 1 37.5 8 9 27 1.06 16.5 0.65 22 0.87
2.5S16-0.5*10 2.5 16 0.5 8 10 22 0.87 25 0.98 14 0.55
2L32-0.7*20 2 32 0.7 22.4 31 20 54 2.13 36 1.42 52 2.05 E19(N45S)
4S16-0.5*10 4 16 0.5 8 10 22 0.87 25 0.98 14 0.55
4L32-0.7*10 4 32 0.7 22.4 16 10 55 2.17 26 1.02 76 2.99 E19(N45L)
3.5S32-1.0*32 3.5 32 1 32 32 41 1.61 60 2.36 39 1.54 B73
Tire Parameter
Outer Diameter 70mm / 90mm
Thickness 8~15mm(8mm:5MHz; 15mm: 1 or 2MHz)
Flexible Array Series
Length 70mm / 120mm
Features
Impedance 1.5MRayl
Material Attenuation 0.14dB/mm/MHz Suitable for Uneven Surface, Variable Curvature
Suitable for Narrow Space Inspection
Applications
Complex Curvature Workpiece Inspection
Narrow Space Workpiece Inspection
On-site Inspection
5S64-1.0*10 5 64 1.0 64 10
7.5S32-0.5*10 7.5 32 0.5 16 10
Complicated Workpiece Probe
Applications
R1/5/7/8 R9
For Flat & Curved Combined Surface inspection
Specifications and Dimensions
Casing Dimensions Specifications and Dimensions
Active
Frequency Pitch Radius Elevation Case
Model
(MHz)
Elements
(mm) R
Aperture
(mm)
(mm)
Long (L) Width (W) Height (H)
Type
mm in mm in mm in Casing Dimensions
3.5C128-0.625*13-R32 3.5 128 0.625 R32 80 13 111 4.37 19 0.75 56 2.20 R8 Frequency Pitch
Active
Elevation Case
Model Elements Aperture Long (L) Width (W) Height (H)
(MHz) (mm) (mm) Type
3.5C96-0.6*12-R22.9 3.5 96 0.6 R22.9 57.6 12 95.1 3.74 19 0.75 52 2.05 R7 (mm)
mm in mm in mm in
4C64-1.0*10-R50 4 64 1.0 R50 64 10 124 4.88 18 0.71 60 2.36 R1 5S16-0.5*10 5 16 0.5 8 10 25 0.98 22 0.87 10 0.39 R11
10C64-1.0*10-R29 10 64 1.0 R29 64 10 106 4.17 18 0.71 47 1.85 R5
Wedge
Features
T1: QLC260P P1: Omni Connector 30056 C1: CONEC(TD) J1: D38999
T1(Male)-J1(Female) T1(Male)-D1(Female) T1(Male)-C1(Female)
J1(Probe)-T1(Instrument-Phascan) D1(Probe)-T1(Instrument-Phascan) C1(Probe)-T1(Instrument-Phascan)
Cable Types
We select the best coaxial cable from world famous brands, with excellent performance.
Doppler designed a series of standard probes, customized probes and relevant accessories, in total more than 4000 models. Probes are
Conventional
widely used in aerospace, nuclear power, oil and gas, mechanical manufacturing, shipping industry, railway transportation, medicals and so
on, and used on a variety of projects around the world. With more than 10 years transducer design experiences and keep improving
manufacturing process to ensure high performance and reliability of products. Doppler keep bringing in talents, investing in R&D, testing
and production facilities. From ultrasonic field distribution to transducer stack up design, Doppler keep innovating and progressing to bring
PL - Universal Series
Applications
General inspection environments
Features
With appropriate sensitivity and resolution
Longer duration of wave, typically at 3~5 cycles
Lower bandwidth, typically at 35~50%
Conventional UT Probes 34
PH - Short Pulsing Series Probe Test Report Data Type
CN
Description
Complied to Chinese GB/T 27664.2 Testing Standards
EN Complied to European EN 12668-2 Testing Standards
Applications The probe produced by Doppler are passed through a rigorous
Ideal for precise thickness measurement, near surface testing and certification, with reliable detection equipment and Complied to North America ASTM E-1065 Testing
stable testing environment. Complies with domestic and
AT
Standards
detection environments
international relevant detection standards, with a true reflection of For Twin Crystal Longitudinal Wave Angle Probes, analysis
performance of probes, and ensure consistency of all same probe relationship between Angles, Focal Depth and Focal
Features models; All data characteristics are reappearanceable, and saved LFA Points, Center Frequency, Bandwidth, Sensitivity and
Excellent vertical and horizontal resolutions as archive to make sure data can obtain again in future. relevant important data
Tiny blind spot width of initial pulse
Less Sensitivity than PL and C Series
Shorter duration of wave, typically at 1.5~2 cycles TRL Angle Beam Probe Data Sheet
Information
Higher Bandwidth, typically at 80~110% Piezoelectric ceramics
Probe SN. : HDD026 : 2(8×14)
dimension(mm)
Frequency(MHz) : 2 Housing dimension(mm) : 25×25×30
Beam angle(°) : 45 Connector type : C5×2
Focal distance(mm) : FD10 Macroshape : Flat
Index point&Wedge delay measure Beam angle measure
Block SN. : 708203 Block SN. : 081538
Reflector radius : R25 Reflector hole (mm) : Φ2
Block velocity L/S(m/s) : 5750/3150 Block velocity L/S(m/s) : 5750/3150
Cable length/Type : 1.5m/RG174/U Cable length/Type : 1.5m/RG174/U
Index point(mm) : 10.0 Beam angle β (°) : 45.6
Wedge delay(us) : 8.47
5 7.2 52.2 30
10 13.7 47.2 82
Applications 15 20.4 45.6 90
20 27.3 45 71
High penetration power and high SNR for coarse-grained, 25 33.8 44 52
30 38 43.8 50
fiber-reinforced composite materials 35 42 43 36
40 47 42.6 30
45 52 42 25
50 58 41.5 20
Features
1-3 Piezo-Composite Crystal
Higher Sensitivity to PL and PH Series
Shorter duration of wave, typically at 2~2.5 cycles
Higher Bandwidth, typically at 70~110%
Low acoustic impedance composites enable probes better
matching with low acoustic impedance medium such as water, plastics, etc
LFA
35 Conventional UT Probes Conventional UT Probes 36
CN
CN EN
Features
Wear resistant stainless steel housing
Wear resistant front end protective layer, long service life
Good match acoustic impedance with most metals
3 types of performance to meet the cast majority of testing requirements
Applications
Simple structure of metals
Large plates, bars, forgings, metals and non-metals
Small tanks, pipes, castings, bars
Sandwich and laminated structures
Materials velocity and characteristics
AT Coarse grain or high attenuation materials
Specification
Frequency Diameter Models N5-10P10-H
Features Applications
MHz mm in PL PH C Less coupling effects on uneven surface of workpiece Simple structure of metals
13 0.50 N5-1P13 N5-1P13-H N5-1C13
1 19 0.75 N5-1P19 N5-1P19-H
Replaceable protective files, can extend service life Large plates, bars, forgings, metals and non-metals
/
Membranes can be purchased separately Small tanks, pipes, castings, bars
25 1.00 N5-1P25 N5-1P25-H / N5-10P6-H
6 0.25 N5-2.25P6 N5-2.25P6-H N5-2.25C6 Sandwich and laminated structures
10 0.375 N5-2.25P10 N5-2.25P10-H N5-2.25C10
2.25 13 0.50 N5-2.25P13 N5-2.25P13-H N5-2.25C13 Dimensions
6 0.25 N5-3.5P6 N5-3.5P6-H N5-3.5C6 10 0.375 20.0 0.79 42.5 1.67 24.0 0.94 14.0 0.55 1.5 0.06 Lemo-00/Side Mounting
10 0.375 N5-3.5P10 N5-3.5P10-H N5-3.5C10 24 0.94 30.0 1.18 59.5 2.34 45.0 1.77 29.0 1.14 1.5 0.06 Lemo-1/Side Mounting
3.5 13 0.50 N5-3.5P13 N5-3.5P13-H /
19 0.75 N5-3.5P19 N5-3.5P19-H / Specification
25 1.00 N5-3.5P25 N5-3.5P25-H / N5-5P6
Frequency Dimensions Model
6 0.25 N5-5P6 N5-5P6-H N5-5C6 MHz mm in PL
10 0.375 N5-5P10 N5-5P10-H N5-5C10
N5-2.25P10 MembranceSpecification
5 10 0.375 PF1-2P10
Specification 2
13 0.50 N5-5P13 N5-5P13-H / Model 24 0.94 PF1-2P24
mm in
19 0.75 N5-5P19 N5-5P19-H / 10 0.375 PF1-4P10
2QT0150 10 0.375 4
6 0.25 N5-7.5P6 N5-7.5P6-H / 24 0.94 PF1-4P24
3SS0058 24 0.94
7.5 10 0.375 N5-7.5P10 N5-7.5P10-H / 10 0.375 PF1-5P10
13 0.50 N5-7.5P13 N5-7.5P13-H / 5 PF1-2P24
24 0.94 PF1-5P24
6 0.25 N5-10P6 N5-10P6-H /
10 10 0.375 N5-10P10 N5-10P10-H /
13 0.50 N5-10P13 N5-10P13-H /
3 0.125 / N5-15P3-H / 3WK0564 PF1-4P10
15
6 0.375 / N5-15P6-H /
3WK0545
20 3 0.125 / N5-20P3-H /
25 3 0.125 / N5-25P3-H /
Dimensions
Specification A B C
mm in mm in mm in mm in
3 0.125 6.5 0.26 7.5 0.3 10 0.4
6 0.25 9 0.35 10.5 0.41 13 0.51
10 0.375 14 0.55 15 0.59 14 0.55
13 0.50 17 0.66 18 0.71 16 0.64
2QT0150
19 0.75 24 0.95 25 0.97 16 0.64 PF1-2P10
3SS0058
25 1.00 29 1.15 30 1.18 16 0.64
Features Applications
No initial pulse dead zone effects Corrosion Monitoring
DA5P8FS3
Less scattering, higher SNR in high attenuation material Residual Wall Measurement
Good coupling on curved and rough surfaces Coating Measurement
Two types of performance probes can meet most of detection needs Near Surface Defects Detection Dimensions
Cracks, Porosities, impurity and Porosity detection of Forgings Specification A B C D E Connector
Direction
“PL” Universal Series: High Attenuation material Detection mm in mm in mm in mm in mm in mm in
Ideal for high sensitivity and penetration applications, less Φ9/2 Φ0.35 20.0 0.79 49.0 1.93 24.5 0.96 12.0 0.47 8.0 0.31
Lemo-00/
resolution and bandwidth required environments Φ11/2 Φ0.43 Side Mounting
20.0 0.79 49.0 1.93 24.5 0.96 17.5 0.69 8.0 0.31
3.5 x 10 0.14 x 0.39
“C ” Composite Series:
High penetration power and high SNR for coarse-grained,
fiber-reinforced composite materials Dimensions
Specification A B C D E Connector
mm in mm in mm in mm in mm in mm in Direction
Φ21/2 Φ0.83
Lemo-00/
6x 20 0.24x 0.79 30.0 1.18 65.3 2.57 44.5 1.75 28.5 1.12 7.5 0.30
Side Mounting
7x 18 0.28x 0.71
Specification
Frequency Diameter Focal Length Models
MHz mm in mm in
PL C
1 Φ21/2 Φ0.83 20 0.79 DA1P21FS20 DA1C21FS20
2 Φ8/2 Φ0.314 6 0.24 DA2P8 FS6 DA2C8FS6
2 Φ11/2 Φ0.43 8 0.31 DA2P11FS8 DA2C11FS8
2 3.5 x 10 0.14 x 0.39 10 0.39 DA2P3.5 x 10FS10 DA2C3.5 x 10FS10 DA4P6X24FS12
2 3.5 x 10 0.14 x 0.39 18 0.71 DA2P3.5 x 10FS18 DA2C3.5 x 10FS18
2 7 x 18 0.28 x 0.71 15 0.59 DA2P7 x 18FS15 DA2C7 x 18FS15
DA4P3.5X10FS18
2 7 x 18 0.28 x 0.71 30 1.18 DA2P7 x 18FS30 DA2C7 x 18FS30
4 Φ8/2 Φ0.314 6 0.24 DA4P8 FS6 DA4C8FS6
4 3.5 x 10 0.14 x 0.39 10 0.39 DA4P3.5 x 10FS10 DA4C3.5 x 10FS10 DA5P9FS10
4 3.5 x 10 0.14 x 0.39 18 0.71 DA4P3.5 x 10FS18 DA4C3.5 x 10FS18
4 6 x 20 0.24 x 0.79 12 0.47 DA4P6 x 20FS12 DA4C6 x 20FS12
4 6 x 20 0.24 x 0.79 25 0.98 DA4P6 x 20FS25 DA4C6 x 20FS25
5 Φ8/2 Φ0.314 3 0.12 DA5P8 FS3 DA5C8FS3
5 Φ9/2 Φ0.35 10 0.39 DA5P9FS10 DA5C9FS10
5 Φ9/2 Φ0.35 25 0.98 DA5P9FS25 DA5C9FS25
10 Φ5/2 Φ0.2 3 0.12 DA10P5 FS3 DA10C5FS3
Microdot/ Microdot/
Φ8/2 0.314 Φ5/2 0.20
Side Mounting Side Mounting Features
Ergonomic design, with durable cast housing
Customizable any theoretical angles of ultrasound
Probe face can be processed into different shapes to ensure good coupling with workpiece:
AID(Axial Inside Diameter) CID(Circumferential Inside Diameter)
AOD(Axial Outside Diameter) COD(Circumferrential Outside Diameter)
North American Standard Three types of performance can meet the most of detection needs
Low height probes, suitable for narrow and limited detection environments “PL ” Universal Series:
Ideal for high sensitivity and penetration applications, less resolution
Applications
Side Mounting with 1.8 meter cable length, cable end with Lemo 01(C9), or BNC(Q9) connectors(optional)
and bandwidth required environments. For Welding Inspection
Pipes, Pressure Vessels, Storage Tanks
“PH ” Short Pulsing Series: Turbine Blades
High damping and bandwidth, high SNR for high attenuation material
detection, good resolution for precise thickness measurements and Wheel Axles, Castings, Forgings
Dimensions Bond Testing
Specification A B C D
near surface detection environments.
Railway Wheels and Tracks
mm in mm in mm in mm in mm in
“C ” Composite Series:
6 0.25 12.0 0.47 16.5 0.65 9.5 0.37 22.0 0.87
High penetration power and high SNR for coarse-grained, fiber-
10 0.375 16.0 0.63 16.5 0.65 12.0 0.47 22.0 0.87
reinforced composite materials.
13 0.50 19.5 0.77 17.0 0.67 15.5 0.61 22.0 0.87
Specification
Models DA3-5P13-1
Frequency Diameter
Cable End with BNC Cable End with Lemo 01
MHz mm in PL C PL C
6 0.25 DA3-2.25P6-B DA3-2.25C6-B DA3-2.25P6-1 DA3-2.25C6-1
2.25 10 0.375 DA3-2.25P10-B DA3-2.25C10-B DA3-2.25P10-1 DA3-2.25C10-1 DA3-2.25C10-1
13 0.50 DA3-2.25P13-B DA3-2.25C13-B DA3-2.25P13-1 DA3-2.25C13-1
6 0.25 DA3-3.5P6-B DA3-3.5C6-B DA3-3.5P6-1 DA3-3.5C6-1
3.5 10 0.375 DA3-3.5P10-B DA3-3.5C10-B DA3-3.5P10-1 DA3-3.5C10-1 DA3-10P6-1
13 0.50 DA3-3.5P13-B DA3-3.5C13-B DA3-3.5P13-1 DA3-3.5C13-1
6 0.25 DA3-5P6-B DA3-5C6-B DA3-5P6-1 DA3-5C6-1
5 10 0.375 DA3-5P10-B DA3-5C10-B DA3-5P10-1 DA3-5C10-1
13 0.50 DA3-5P13-B DA3-5C13-B DA3-5P13-1 DA3-5C13-1
7.5 6 0.250 DA3-7.5P6-B DA3-7.5C6-B DA3-7.5P6-1 DA3-7.5C6-1
10 6 0.25 DA3-10P6-B DA3-10C6-B DA3-10P6-1 DA3-10C6-1
Microdot(L5), Lemo 00(C5), and Lemo 01 (C9) Top Side Mounting Connectors, 4 8x 9 0.31x 0.35 70 30 1.2 A4P8x 9A70 A4C8x 9A70
all models can be customized for Top mounting except size 3*4mm A4P8X9A45 4 8x 9 0.31x 0.35 90 30 1.2 A4P8x 9A90 A4C8x 9A90
4 14 x 14 0.55x 0.55 45 78 3.0 A4P14x 14A45 A4C14x 14A45
4 14 x 14 0.55x 0.55 60 78 3.0 A4P14x 14A60 A4C14x 14A60
Dimensions
4 14 x 14 0.55x 0.55 70 78 3.0 A4P14x 14A70 A4C14x 14A70
Specification A B C
Connector Direction 4 20 x 22 0.79x 0.87 38 184 7.2 A4P20x 22A38 /
mm in mm in mm in mm in
4 20 x 22 0.79x 0.87 45 184 7.2 A4P20x 22A45 /
3x 4 0.12x 0.16 16.0 0.60 7.0 0.30 7.0 0.30 Microdot/Top Mounting
4 20 x 22 0.79x 0.87 60 184 7.2 A4P20x 22A60 /
4 20 x 22 0.79x 0.87 70 184 7.2 A4P20x 22A70 /
Dimensions 5 5x 5 0.2 x 0.2 45 13 0.5 A5P5*5A45 A5C5*5A45
Specification A B C 5 5x 5 0.2 x 0.2 60 13 0.5 A5P5*5A60 A5C5*5A60
Connector Direction
mm in mm in mm in mm in 5 5x 5 0.2 x 0.2 70 13 0.5 A5P5*5A70 A5C5*5A70
5x5 0.2 x 0.2 16.0 0.63 8.0 0.31 11.5 0.45 Microdot/Side Mounting
A6P3X4A70 5 14 x 14 0.55x 0.55 45 100 3.9 A5P14x 14A45 /
5 14 x 14 0.55x 0.55 60 100 3.9 A5P14x 14A60 /
Dimensions 5 14 x 14 0.55x 0.55 70 100 3.9 A5P14x 14A70 /
Specification A B C 6 3x 4 0.12x 0.16 45 7 0.27 A6P3*4A45 A6C3*4A45
Connector Direction
mm in mm in mm in mm in 6 3x 4 0.12x 0.16 60 7 0.27 A6P3*4A60 A6C3*4A60
8x9 0.31x 0.35 27.0 1.10 16.6 0.65 22.0 0.86 6 3x 4 0.12x 0.16 70 7 0.27 A6P3*4A70 A6C3*4A70
Lemo-00/Side Mounting
14x14 0.55x 0.55 36.0 1.40 21.0 0.80 30.5 1.20
20x22 0.79x 0.87 54.0 2.10 32.0 1.30 44.0 1.70 Lemo-1/Side Mounting
Dimensions
North American Standard
A4P20X22A45 Frequency ax b β(°) Near Field Models Replaceable Delay Lines
MHz mm in Steel mm in PL C
Delay Lines are divided into two types:
1 20 x 22 0.79x 0.87 45 45 1.8 A1P20x 22A45 A1C20x 22A45
standard cutting edge and short cutting edge
1 20 x 22 0.79x 0.87 60 45 1.8 A1P20x 22A60 A1C20x 22A60
1 20 x 22 0.79x 0.87 70 45 1.8 A1P20x 22A70 A1C20x 22A70
Microdot (L5) Top Mounting Connector A3-2.25P13
2 8x 9 0.31x 0.35 38 15 0.6 A2P8x 9A38 A2C8x 9A38
2 8x 9 0.31x 0.35 45 15 0.6 A2P8x 9A45 A2C8x 9A45 Probe Specification
2 8x 9 0.31x 0.35 60 15 0.6 A2P8x 9A60 A2C8x 9A60 Frequency Diameter Models Threads
2 8x 9 0.31x 0.35 70 15 0.6 A2P8x 9A70 A2C8x 9A70 MHz mm in PL PH C in
2 8x 9 0.31x 0.35 90 15 0.6 A2P8x 9A90 A2C8x 9A90 1 13 0.50 A3-1P13 A3-1P13-H A3-1C13 5/8-24
2 14 x 14 0.55x 0.55 45 39 1.5 A2P14x 14A45 A2C14x 14A45 6 0.25 A3-2.25P6 A3-2.25P6-H A3-2.25C6 3/8-32
2 14 x 14 0.55x 0.55 60 39 1.5 A2P14x 14A60 A2C14x 14A60 2.25 10 0.375 A3-2.25P10 A3-2.25P10-H A3-2.25C10 1/2-28
2 14 x 14 0.55x 0.55 70 39 1.5 A2P14x 14A70 A2C14x 14A70 13 0.50 A3-2.25P13 A3-2.25P13-H A3-2.25C13 5/8-24
2 20 x 22 0.79x 0.87 38 92 3.6 A2P20x 22A38 A2C20x 22A38 6 0.25 A3-3.5P6 A3-3.5P6-H A3-3.5C6 3/8-32
2 20 x 22 0.79x 0.87 45 92 3.6 A2P20x 22A45 A2C20x 22A45 3.5 10 0.375 A3-3.5P10 A3-3.5P10-H A3-3.5C10 1/2-28
2 20 x 22 0.79x 0.87 60 92 3.6 A2P20x 22A60 A2C20x 22A60 13 0.50 A3-3.5P13 A3-3.5P13-H A3-3.5C13 5/8-24 A3-5P10
2 20 x 22 0.79x 0.87 70 92 3.6 A2P20x 22A70 A2C20x 22A70 6 0.25 A3-5P6 A3-5P6-H A3-5C6 3/8-32
A5P5X5A70 4 8x 9 0.31x 0.35 38 30 1.2 A4P8x 9A38 A4C8x 9A38 5 10 0.375 A3-5P10 A3-5P10-H A3-5C10 1/2-28
4 8x 9 0.31x 0.35 45 30 1.2 A4P8x 9A45 A4C8x 9A45 13 0.50 A3-5P13 A3-5P13-H / 5/8-24 A3-2.25P6
4 8x 9 0.31x 0.35 60 30 1.2 A4P8x 9A60 A4C8x 9A60 7.5 6 0.25 A3-7.5P6 A3-7.5P6-H / 3/8-32
10mm(0.375in) Standard Delay Line Dimensions 10mm(0.375in) Short Delay Line Dimensions
β(°) A B C Cutting edge Threads Specification β(°) A B C Cutting edge Threads Specification
Dimensions Models Models
Specification Steel mm in mm in mm in mm in in mm in Steel mm in mm in mm in mm in in mm in
A B Connector
mm in mm in mm in Direction Φ10-45° 45 22.6 0.89 14 0.55 11.9 0.47 11 0.43 1/2-28 Φ10-45° 45 22.6 0.89 14 0.55 11.9 0.47 8 0.31 1/2-28
6 0.25 11 0.42 14 0.56 Φ10-60° 60 26.4 1.04 14 0.55 14 0.55 14 0.55 1/2-28 Φ10-60° 60 26.4 1.04 14 0.55 14 0.55 9.5 0.37 1/2-28
10 0.375 10 0.375
Microdot/ Φ10-70° 70 30.2 1.19 14 0.55 14.7 0.58 17 0.67 1/2-28 10.5 0.41 1/2-28
10 0.375 14 0.55 15 0.58 Φ10-70° 70 30.2 1.19 14 0.55 14.7 0.58
Top Mounting
13 0.50 18 0.70 17 0.65 Φ10-90° 90 29.5 1.15 14 0.55 14.7 0.61 - - 1/2-28 Φ10-90° 90 29.5 1.15 14 0.55 14.7 0.61 - - 1/2-28
13mm(0.5in) Standard Delay Line Dimensions 13mm(0.5in) Short Delay Line Dimensions
β(°) A B C Cutting edge Threads Specification β(°) A B C Cutting edge Threads Specification
Models Models
Steel mm in mm in mm in mm in in mm in Steel mm in mm in mm in mm in in mm in
Φ13-45° 45 26.7 1.05 17.8 0.70 14 0.55 13 0.51 5/8-24 Φ13-45° 45 26.7 1.05 17.8 0.70 14 0.55 10 0.39 5/8-24
Φ13-60° 60 31.5 1.24 17.8 0.70 16.3 0.64 16 0.63 5/8-24 Φ13-60° 60 31.5 1.24 17.8 0.70 16.3 0.64 11.5 0.45 5/8-24
13 0.5 13 0.5
Φ13-70° 70 35.8 1.41 17.8 0.70 17.3 0.68 20 0.79 5/8-24 Φ13-70° 70 35.8 1.41 17.8 0.70 17.3 0.68 13 0.51 5/8-24
Φ13-90° 90 35.5 1.39 17.8 0.70 18.5 0.73 - - 5/8-24 Φ13-90° 90 35.5 1.39 17.8 0.70 18.5 0.73 - - 5/8-24
Φ13-60°
Φ6-70°
Φ10-60°
Φ10-45°
Dimensions 1 8x 14 0.31x 0.55 45 10 0.39 25 0.98 DA1P8 x 14LA45 DA1C8x 14LA45
Specification A B C 1 8x 14 0.31x 0.55 60 10 0.39 20 0.79 DA1P8 x 14LA60 DA1C8x 14LA60
mm in mm in mm in mm in Instructions 1 8x 14 0.31x 0.55 70 10 0.39 20 0.79 DA1P8 x 14LA70 DA1C8x 14LA70
1 10 x 18 0.39x 0.71 45 15 0.59 30 1.18 DA1P10x 18LA45 DA1C10x 18LA45
7x 10 0.28x 0.39 25.0 0.98 25.0 0.98 30.0 1.18 C - Composite Series is the default probe
8x 14 0.31x 0.55 25.0 0.98 25.0 0.98 30.0 1.18 1 10 x 18 0.39x 0.71 60 15 0.59 30 1.18 DA1P10x 18LA60 DA1C10x 18LA60
FS means Sound Path, FD means Focal 1 20 x 34 0.79x 1.34 60 25 0.98 75 2.95 DA1P20x 34LA60 DA1C20x 34LA60
Depth, 1 20 x 34 0.79x 1.34 70 25 0.98 70 2.76 DA1P20x 34LA70 DA1C20x 34LA70
2 7x 10 0.28x 0.39 45 10 0.39 25 0.98 DA2P7 x 10LA45 DA2C7x 10LA45
Conversion of FS, FD and β is:
2 7x 10 0.28x 0.39 60 10 0.39 25 0.98 DA2P7 x 10LA60 DA2C7x 10LA60
Cosβ=FD/(FS+0.5D), where D is diameter
Lemo 00(C5) Top Mounting Connectors,
2 7x 10 0.28x 0.39 70 10 0.39 20 0.79 DA2P7 x 10LA70 DA2C7x 10LA70
2 8x 14 0.31x 0.55 45 15 0.59 30 1.18 DA2P8x 14LA45 DA2C8x 14LA45
Side Mounting can be customized
2 8x 14 0.31x 0.55 60 10 0.39 30 1.18 DA2P8x 14LA60 DA2C8x 14LA60
2 8x 14 0.31x 0.55 70 10 0.39 25 0.98 DA2P8x 14LA70 DA2C8x 14LA70
2 10 x 18 0.39x 0.71 45 20 0.79 45 1.77 DA2P10x 18LA45 DA2C10x 18LA45
2 10 x 18 0.39x 0.71 60 15 0.59 40 1.57 DA2P10x 18LA60 DA2C10x 18LA60
Features 2 10 x 18 0.39x 0.71 70 15 0.59 30 1.18 DA2P10x 18LA70 DA2C10x 18LA70
2 15 x 25 0.59x 0.98 45 25 0.98 85 3.35 DA2P15x 25LA45 DA2C15x 25LA45
No initial pulse dead zone effects
2 15 x 25 0.59x 0.98 60 20 0.79 75 2.95 DA2P15x 25LA60 DA2C15x 25LA60
Less scattering, higher SNR in high attenuation material 2 15 x 25 0.59x 0.98 70 20 0.79 70 2.76 DA2P15x 25LA70 DA2C15x 25LA70
Probe face can be processed into different shapes to ensure good coupling with workpiece: 2 20 x 34 0.79x 1.34 45 40 1.57 120 4.72 DA2P20x 34LA45 DA2C20x 34LA45
AID(Axial Inside Diameter), CID(Circumferential Inside Diameter), 2 20 x 34 0.79x 1.34 60 30 1.18 120 4.72 DA2P20x 34LA60 DA2C20x 34LA60
AOD(Axial Outside Diameter), COD(Circumferrential Outside Diameter) 2 20 x 34 0.79x 1.34 70 30 1.18 105 4.13 DA2P20x 34LA70 DA2C20x 34LA70
Two types of performance probes can meet most of detection needs 4 7x 10 0.28x 0.39 45 10 0.39 35 1.38 DA4P7x 10LA45 DA4C7x 10LA45
4 7x 10 0.28x 0.39 60 10 0.39 35 1.38 DA4P7x 10LA60 DA4C7x 10LA60
4 7x 10 0.28x 0.39 70 10 0.39 30 1.18 DA4P7x 10LA70 DA4C7x 10LA70
“PL ” Universal Series: 4 8x 14 0.31x 0.55 45 20 0.79 60 2.36 DA4P8x 14LA45 DA4C8x 14LA45
Ideal for high sensitivity and penetration applications, less resolution and bandwidth required environments 4 8x 14 0.31x 0.55 60 15 0.59 55 2.17 DA4P8x 14LA60 DA4C8x 14LA60
4 8x 14 0.31x 0.55 70 10 0.39 50 1.97 DA4P8x 14LA70 DA4C8x 14LA70
“C ” Composite Series:
4 10 x 18 0.39x 0.71 45 25 0.98 85 3.35 DA4P10x 18LA45 DA4C10x 18LA45
High penetration power and high SNR for coarse-grained,fiber-reinforced composite materials
4 10 x 18 0.39x 0.71 60 20 0.79 70 2.76 DA4P10x 18LA60 DA4C10x 18LA60
4 10 x 18 0.39x 0.71 70 15 0.59 60 2.36 DA4P10x 18LA70 DA4C10x 18LA70
4 15 x 25 0.59x 0.98 45 30 1.18 100 3.94 DA4P15x 25LA45 /
4 15 x 25 0.59x 0.98 60 25 0.98 90 3.54 DA4P15x 25LA60 /
4 15 x 25 0.59x 0.98 70 20 0.79 80 3.15 DA4P15x 25LA70 /
Applications
Direct Flaw Detection
Precise Thickness Measurements
Near Surface Flaw Detection
Surface Detection of Curved Workpiece
Delay Line Probe - Pen Type
Ultra Thin Workpiece Detection Replaceable Delay Lines
Ultra Small Contact area of probe front, suitable for high bending
surface detection, such as turbine blades
3Types Handle Bars: horizontal, 45° and 90°
Replaceable Horizontal Handle Bar
Delay Line can be purchased separately, Model: 1GW2912
Microdot (L5) Tail-end Mounting Connector
Delay Line Probe
DL-20P3-H
Delay Line can be purchased separately Probe Specification
Default Length of Delay Lines: Frequency Diameter Models
Φ3mm(0.125in) Crystal Probe with 5.5mm(0.22in) Length of Delay Line DL-10P6-H MHz mm in PH
DL-15P6-H
Φ5/6/13mm(0.2/0.25/0.5in) Crystal Probe with 12.7(0.5in) Length of Delay Line 15 3 0.125 P-15P3-H (0°)
Microdot (L5) Side Mounting Connector 15 3 0.125 P-15P3-H (45°)
15 3 0.125 P-15P3-H (90°)
DL-10P3-H
Ideal for high sensitivity and penetration applications, less resolution and bandwidth required environments mm in mm in
1 20 0.79 I1-1P20 I1-1P20-H I1-1C20 32 1.26 50 1.97
“PH” Short Pulsing Series: 10 0.39 I1-2P10 I1-2P10-H I1-2C10 18 0.71 25 0.98
2
High damping and bandwidth, high SNR for high attenuation material detection, good resolution for precise thickness measurements 20 0.79 I1-2P20 I1-2P20-H I1-2C20 30 1.18 85 3.35
and near surface detection environments 10 0.39 I1-4P10 I1-4P10-H I1-4C10 22 0.87 45 1.77
4
20 0.79 I1-4P20 I1-4P20-H / 45 1.77 180 7.09
“C” Composite Series: 5 0.20 I1-5P5 I1-5P5-H I1-5C5 11 0.43 20 0.79
5
High penetration power and high SNR for coarse-grained, fiber-reinforced composite materials 10 0.39 I1-5P10 I1-5P10-H I1-5C10 20 0.79 55 2.17
5 0.20 I1-10P5 I1-10P5-H I1-10C5 12 0.47 38 1.50
10
10 0.39 I1-10P10 I1-10P10-H / 15 0.59 110 4.33
Instruction: 15 5 0.20 / I1-15P5-H / 12 0.47 40 1.57
1. Most of immersion probes working between
-10°C(14°F) to 55°C(131°F); For lower Min
Temp may cause sensitivity drop, and for
exceed max temp may cause malfunction of
internal of probe.
2. Due to epoxies as matching layer and with
certain water absorption rate, Immersion time
should control less than 8 hours and working
again after 16 hours, otherwise may cause
glue abate of matching layer of probe; For
frequency ≥10MHz, may easier to be North American Standard - l2
damaged by it's thin matching layer.
Dimensions
Probe Specification A B C
mm in mm in mm in m in
19 0.75 25 1.00 27 1.06 32 1.25
25 1.00 32 1.25 33 1.31 32 1.25
29 1.125 35 1.38 37 1.44 32 1.25
Features
Probe Specification
High damping and Wide Bandwidth performance
Frequency Diameter Models Focal Range
Min Max
High efficiency for welding inspection
MHz mm in PL PH C Quick change structure of probe and delay line
mm in mm in
13 0.50 I5-1P13 I5-1P13-H I5-1C13 16 0.63 20 0.79
IHC for Irrigation, Holes, Carbides of Delay Line
1
19 0.75 I5-1P19 I5-1P19-H I5-1C19 30 1.18 45 1.77 IHS for Irrigation, Holes, Stainless Structure of Delay Line
6 0.25 I5-2.25P6 I5-2.25P6-H I5-2.25C6 10 0.39 12 0.47
2.25 10 0.375 I5-2.25P10 I5-2.25P10-H I5-2.25C10 20 0.79 27 1.06 Probe Dimensions
13 0.50 I5-2.25P13 I5-2.25P13-H I5-2.25C13 25 0.98 45 1.77 Probe Specification A B C
Connector Direction
6 0.25 I5-3.5P16 I5-3.5P6-H I5-3.5C6 20 0.79 38 1.50 Applications mm in mm in mm in mm in
3.5 10 0.375 I5-3.5P10 I5-3.5P10-H I5-3.5C10 20 0.79 38 1.50 3 0.125
12 0.47 18 0.71 6 0.24 Microdot
13 0.50 I5-3.5P13 I5-3.5P13-H I5-3.5C13 22 0.87 65 2.56 Plate Butt Weld Inspections 6 0.25
Top Mounting
6 0.25 I5-5P6 I5-5P6-H I5-5C6 12 0.47 25 0.98 Directional irregular defects 10 0.375 15 0.59 20 0.78 6 0.24
5 10 0.375 I5-5P10 I5-5P10-H I5-5C10 20 0.79 55 2.17 Near surface defects detection
13 0.50 I5-5P13 I5-5P13-H / 22 0.87 100 3.94
6 0.25 / I5-10P6-H / 13 0.51 45 1.77
10 10 0.375 I5-10P10 I5-10P10-H / 15 0.59 100 3.94
13 0.50 I5-10P13 I5-10P13-H / 25 0.98 120 4.72
Dimensions
Probe Specification A B C
mm in mm in mm in m in
6 0.25
13 0.50 19 0.75 24 0.94 19 0.75
19 0.75
Applications
Tf2 Delay Line Dimensions
β(°
) A B C Threads Intermittent contact detection with high temperature
Models
Steel mm in mm in mm in in workpiece (Castings, Forgings etx.,)
TF2-L45-IHC 45 Direct Flaw Detection
TF2-L60-IHC 60 32 1.26 28 1.1 18 0.71 11/16-24 Detection of curved surface of workpiece
TF2-L70-IHC 70
Probe Specification
6mm (0.25in) AH Type Delay Line Dimensions
A B C Threads Probe Specification Diameter
Models Frequency(KHZ) Focus Standard Interface Operating Mode
Models (mm)
mm in mm in mm in in mm in
AB0.25C24NF-T 250 24 NO emission
HT1-Φ6-45° 11.4 0.45 19.1 0.75 9.4 0.37 3/8-32
HT1-Φ6-60° 11.4 0.45 21.3 0.84 11.2 0.44 3/8-32 AB0.25C24NF-R 250 24 NO receive
HT1-Φ6-70° 11.4 0.45 25.4 1.00 12.7 0.50 3/8-32 AB0.42C24NF-T 420 24 NO emission
ZH Type AH Type 6 0.25 BNC
HT2-Φ6-45° 11.4 0.45 19.1 0.75 9.4 0.37 3/8-32 AB0.42C24NF-R 420 24 NO receive
HT2-Φ6-60° 11.4 0.45 21.3 0.84 11.2 0.44 3/8-32 AB1C13NF-T 1000 13 NO emission
ZH Type Delay Line Dimensions HT2-Φ6-70° 11.4 0.45 25.4 1.00 12.7 0.50 3/8-32 AB1C13NF-R 1000 13 NO receive
A B Threads Probe Specification
Models
mm in mm in in mm in 10mm (0.375in) AH Type Delay Line Dimensions
HT1-Φ10-13 15 0.60 13 0.50 1/2-28 A B C Threads Probe Specification
Models
HT1-Φ10-25 15 0.60 25 1.00 1/2-28 10 0.375 mm in mm in mm in in mm in
HT1-Φ10-38 15 0.60 38 1.50 1/2-28 HT1-Φ10-45° 14 0.55 22.6 0.89 11.9 0.47 1/2-28
HT1-Φ13-13 18 0.70 13 0.50 5/8-24 HT1-Φ10-60° 14 0.55 26.4 1.04 14 0.55 1/2-28
HT1-Φ13-25 18 0.70 25 1.00 5/8-24 13 0.5 HT1-Φ10-70° 14 0.55 30.2 1.19 14.7 0.58 1/2-28
10 0.375
HT1-Φ13-38 18 0.70 38 1.50 5/8-24 HT2-Φ10-45° 14 0.55 22.6 0.89 11.9 0.47 1/2-28
HT1-Φ19-13 24 0.95 13 0.50 7/8-20 HT2-Φ10-60° 14 0.55 26.4 1.04 14 0.55 1/2-28
HT1-Φ19-25 24 0.95 25 1.00 7/8-20 19 0.75 HT2-Φ10-70° 14 0.55 30.2 1.19 14.7 0.58 1/2-28
HT1-Φ19-38 24 0.95 38 1.50 7/8-20
HT2-Φ10-13 15 0.60 13 0.50 1/2-28 13mm (0.5in) AH Type Delay Line Dimensions
HT2-Φ10-25 15 0.60 25 1.00 1/2-28 10 0.375 A B C Threads Probe Specification
Models
HT2-Φ10-38 15 0.60 38 1.50 1/2-28 mm in mm in mm in in mm in
HT2-Φ13-13 18 0.70 13 0.50 5/8-24 HT1-Φ13-45° 17.8 0.70 26.7 1.05 14 0.55 5/8-24
HT2-Φ13-25 18 0.70 25 1.00 5/8-24 13 0.5 HT1-Φ13-60° 17.8 0.70 31.5 1.24 16.3 0.64 5/8-24
HT2-Φ13-38 18 0.70 38 1.50 5/8-24 HT1-Φ13-70° 17.8 0.70 35.8 1.41 17.3 0.68 5/8-24
13 0.5
HT2-Φ19-13 24 0.95 13 0.50 7/8-20 HT2-Φ13-45° 17.8 0.70 26.7 1.05 14 0.55 5/8-24
HT2-Φ19-25 24 0.95 25 1.00 7/8-20 19 0.75 HT2-Φ13-60° 17.8 0.70 31.5 1.24 16.3 0.64 5/8-24
HT2-Φ19-38 24 0.95 38 1.50 7/8-20 HT2-Φ13-70° 17.8 0.70 35.8 1.41 17.3 0.68 5/8-24
Side Microdot
(option) (option)
Doppler provides an existing solution for most corrosion application sites, providing a complete set of twin- crystal and single-crystal
DL-15P5-H Delayline/Normal 15 7.9 0.31 0.25-14.5 0.01-0.57 -4 +140 -20 +60 Side Microdot
DL-20P3-H 20 4.8 0.19 0.15-6 0.006-0.24 -4 +140 -20 +60 Side Microdot
thickness measuring probes for thickness measurement of workpiece, work with Accur 1/3/5 different thickness measuring instruments, to P-15P3-H(0°) 15 2.0 0.08 0.5-10 0.02-0.39 -4 +140 -20 +60 Top Microdot
ensure the accuracy of thickness measurement to the greatest extent; besides the measurement of corrosion wall thickness, it can also be P-15P3-H(45°) Pen type/Normal 15 2.0 0.08 0.5-10 0.02-0.39 -4 +140 -20 +60 45° Side Microdot
Single
Crystal P-15P3-H(90°) 15 2.0 0.08 0.5-10 0.02-0.39 -4 +140 -20 +60 Side Microdot 1GC0423 3
used for small diameter pipelines, etc. Measurement and application of tubing, boiler tube wall, penetrating coating, spot weld integrity, MTN506 5 9.0 0.35 3-50 0.12-1.97 -4 +140 -20 +60 Side Microdot
probes with different frequencies, contact sizes and special high temperature applications are available for selection. MTN510 5 14.0 0.55 3-75 0.12-2.95 -4 +140 -20 +60 Side Microdot
MTN513 Standard/Normal 5 17.0 0.67 3-250 0.12-9.84 -4 +140 -20 +60 Side Microdot
MTN106 10 9.0 0.35 3-25 0.12-0.98 -4 +140 -20 +60 Side Microdot
MTN101 10 14.0 0.55 3-50 0.12-1.97 -4 +140 -20 +60 Side Microdot
MT121
MT506 MT105 * Contact for 10 seconds and cool to ambient temperature for reuse.Technical specifications are subject to change without notice.
MT211H MT509
1GC0520 MT509H MT105H MT211
DL-10P6-H
MTN101 MTN106 DL-20P3-H
1GC0478 DL-15P5-H
MTN513 MTN510
P-15P3-H (90°)
MTN506
Custom and Special Probes
P-15P3-H (0°)
1GC0516
From the beginning of Doppler,it has always been our advantage to provide customers with custom and special probes
MT5096 P-15P3-H (45°)
MT102L
MT211L design,and leading the probe technique frontiers.To understand customers'demands and application requests, our
MT105L experienced application engineers, probe design experts work together with our customers, using the best way to provide perfect
application solutions and product designs, to meet & satisfy the demands of challenging ultrasonic market.
1GC0515
MT5096
Standard/Normal 5 11.5 0.45 1.5-50 0.4-2.0 -4 +140 -20 +60 Top Microdot 1GC0516 1
1GC0520
MT211 Standard/Normal 2 16.5 0.65 2-225 0.079-8 -4 +140 -20 +60 Side Lemo-00 1GC0422 1/5
Standard/Normal 1 28.5 1.12 Side Lemo-00 1GC0422 1/5
MT121 8-80 0.31-3.15 -4 +140 -20 +60
MT105H* Standard/High Temp 10 7.5 0.30 1.2-30 0.047-1.18 +32 +932 0 +500 Top Lemo-00 1GC0422 1/5
1GC0478
Twin MT509H* Standard/High Temp 5 11.5 0.45 2-200 0.079-7.87 +32 +932 0 +500 Top Microdot 1GC0514 1
Crystal 1GC0520
MT211H* Standard/High Temp 2 16.5 0.65 3-200 0.12-7.87 +32 +932 0 +500 Top Lemo-00 1GC0422 1/5
Fingertips/Normal/ 1.2-225 0.05-8.6
MT506 Through Coating 5 7.5 0.30 (Through Coating 5~20) (Through Coating 0.2~0.79) -4 +140 -20 +60 Side Microdot 1GC0424 1
Special Immersion Probe Hollow Focusing Probe LW + SW Dual Waveforms Probe DDA301 Thickness Gauge Probe Special Thickness Gauge Probe Special Dual Element Probe For Coarse
Grain Material Detection
Probe Cables
The probe cables can according to customer needs any custom. Unless otherwise specified, the length is generally 1.8 meters.
Blind Spot Short Pulse Probe Surface Wave Probe Guide Wave Probe
FC-01
Scanners PA+TOFD Scanner
Doppler FC-01 Type PA+TOFD welds scanner is suitable for pipe butt
weld inspection with diameter over 6"(150mm) by axial direction, and flat butt
weld inspection. Combine with four probe clamps & one wheel type encoder.
Free collocation of PA probes & TOFD probes by inspection needs.
Parameter
Range Circumferential: Φ6"(150mm)~Flat
Dimensions 426*110*125mm
Encoder Step 48Step/mm
IP Level IP67
Operating Temperature -10℃~50℃
ENC-10
Wheel Encoder
The Doppler ENC-10 wheel encoder is mainly used with single PA probe for pipe and plate welds
inspection. The structure is simple and convenient, it can be directly connected to the wedge, and according
to the detection process, the direction of the probe can be changed, which is capable to perform scan
forward or backward on the left or right of welding.
Scanners 72
MOS-40 Range
Parameter
Circumferential:Φ100mm~Flat
Dual Probes Spiral Welded Pipe Scanner (Axial or Girth Welding Compatible) Dimensions 95*85*65mm
Parameter
MOS-02
Range
Axcial, Girth: OD≥Φ200mm Mouse Type TKY Conner Weld Scanner
Spiral Welded: OD≥Φ500mm
Dimensions 282*243*82mm
Doppler MOS-02 Mouse Type Scanner is designed for recordable inspection of TKY Conner Welds by using Single Phased Array Probe.
IP Level IP64
Features
Operating Temperature -10℃~50℃
Using Mouse Type Ergonomic Design, Smart and Comfort to Operate
Wedge Width Range 22~48mm
Conceal Design of Encoder, more beneficial to prevent data loss of
encoder track-slipping, and extend the lifetime of encoder
MOS-02 includes 4 strong magnetic wheels, combines pressure springs
to make sure tightly closefit between Phased Array probe and workpiece
surface, and make sure sufficient coupling effects
The probe clamping is 90 ° direction adjustable, to perform lateral
scanning and vertical scanning
MOS-01
Mouse Type Girth Weld Scanner
MOS-03
Doppler MOS-01 Mouse Type Scanner is designed for recordable inspection of circumferential above Φ100mm Pipe Girth Welds and Plate
Butt Welds by using Phased Array Probe. Mouse Type PA/TOFD Dual Probes Scanner
Features Doppler MOS-03 Mouse Type Scanner is designed for bilateral simultaneous inspection of Plate Butt Welds by using Dual Phased Array
Uses the imitation mouse ergonomics design, the operation is Probes, or single group of TOFD inspection. Equipped with a Laser Guide, to ensure when traveling along the weld center-line during
convenient and comfortable inspection.
Encoder hidden in the "mouse" can prevent the encoder from Parameter
slipping, resulting in data loss, but also enhance the life of the encoder
"Mouse" is equipped with four strong magnetic wheels and torsion Scope of Application: Plate Butt Welds
spring, which can make the phased array probe and the workpiece Scanner Size: 350*182*43mm
surface closely adhere to ensure the coupling effect Encoder Step: 38 Pulses/mm
It can change the clamping direction of the probe at 90 degrees, Ingress Protection Ratting: Ip67
compatible with "left and right scan" and "front and back scan" Wedge Clamping Width: 32~48mm
73 Scanners Scanners 74
MOS-07 MOS-04
Pipe seat weld scanner Chain Scanner for Large Pipelines
MOS-04 is suitable for circumferential circumferential weld detection of large diameter pipe. The scanner is easy to assemble and operate,
MOS07-DD Automatic and can be quickly disassembled. MOS-04 scanner can clamp two PA + two TOFD probes simultaneously for weld scanning. It is suitable for
circumferential weld scanning of large pipes with diameter ranging from 8"(203mm) - 50"(1270mm).
Suitable for welding seam detection of nozzle at 90°
Including angle coding and position coding dual-axis encoder, can accurately locate
Parameter
the position of probe relative to the weld by sofeware
With the phased array instrument software, the cross-sectional diagram of each Girth Range Φ203mm-Φ1270mm
scanning position can be displayed in real time to assist in the determination of IP Level IP65
defects Storage Temperature -20°C- +60°C
The small magnetic & automatic crawler drives the scanner to scan in the axial Operating Temperature -10°C- +50°C
direction of the branch pipe, controlled by the handle button, and easy to operate
Detection scope: Φ100mm≤Outer Diameter of Branch Pipe≤Φ300mm, Outer
Diameter of Main Pipe≥Φ600mm
MOS07 Manual
Suitable for welding seam detection of nozzle at 90°
Including angle coding and position coding dual-axis encoder, can accurately locate
the position of probe relative to the weld
The chain link number of the scanner can be adjusted according to the outer
diameter of branch pipe
With the computer, the cross-sectional diagram of each scanning position can be
displayed in real time to assist in the determination of defects
Detection scope: Φ100mm≤Outer Diameter of Branch Pipe≤Φ300mm, Outer
Diameter of Main Pipe≥Φ600mm
CRS-25
Chain Scanner
75 Scanners Scanners 76
CRS-7 Tool Free Assembly CRS-15 Narrow Chains with Quick Disassembly
Chain Scanner for Small Pipes Chain Scanner for Small Pipes
Doppler CRS-7 Chain scanner is mainly used to inspect girth welding of pipes OD 0.8"(20mm) to 4.5"(114.3mm),one sided or two Doppler CRS-15 small piping scanner is mainly used to pipe OD 0.8"(20mm) to 4.5"(114.3mm) girth welding PAUT. Single or twin
chains two sided are optional. chains optional, width of each chain is only 34mm,which could be deploied to limited clearance with special probe.
Parameter Parameter
Range Φ0.8"(20mm)~Φ4.5"(114.3mm) Range Φ0.8"(20mm)~Φ4.5"(114.3mm)
Encoder Step 100 Step/mm Encoder Step 100 Step/mm
Width 55mm Width 34mm
Height 12mm Height 17mm
IP Level IP65 IP Level IP65
Operating Temperature -10℃~50℃ Operating Temperature -10℃~50℃
77 Scanners Scanners 78
FC-02 Parameter
Axial: Φ17"(425mm)~Flat
Dimensions 446*182*128mm
PA/TOFD (FC02) Scanner support curvature adjustment, applicable to detection for pipe and plate in direction of circumferential and axial.
Pressure regulator ensures wedge closely attach to work piece for an effective detection. By equipped with reliable brake device, the scanner Encoder Step 48 Step/mm
can firmly stay at any position. By simple operation, most of scanning functions can be achieved manually. Scanner can be assembled with 4 IP Level IP67
probes according to detection requirement (PA / UT), convenient assembly and disassembly. Operating Temperature -10℃~50℃
Plate Butt Weld Pipeline Radial Weld(Outside) Pipeline Radial Weld (Inside)
FC-02+
Features PA+TOFD Scanner
Assembly of 4 probes, probe clamping arms can be disassembled unilateral
manually;
Two horizontal bars can be folded to adjust curvature, manual adjustment
can realize detection from 7 inch pipe to plate in direction of axial;
Two horizontal bars can be rotated, manually adjust a pair of probe clamping
arms can realize detection from 6 inch pipe to plate in direction of
circumference;
Both sides have a brake device, scanner can stay at any position;
Inner water distribution device , save more space;
Space of walking wheel adjustable, freely work on short work piece;
Clamp wedge for different size, strong adaptability.
Parameter Features
Circumferential: Φ6"(150mm)~Flat
Standard Kits Range
Axial: Φ17"(425mm)~Flat
Features: FC-02+ Scanner is based on the model: FC-02, with
extra 1~4 probe clamps, allows to clamp maximum 8 Phased
Dimensions 446*476*139mm
Two brackets (including angle adjusting block, handle and brake device); Array or TOFD probes, which is suitable for multi-groups of
Two foldable horizontal bars with total length of 446mm; Encoder Step 48 Step/mm Phased Array or TOFD inspection requirements.
One encoder with 2.8m cable; IP Level IP67
79 Scanners Scanners 80
FS-04 DSC-08
Corrosion Scanner Multi-function Automated Scanner
7.5S64-1.0*10 flexible phased array probe+water jacket,small pipe corrosion DSC-08 Multi-funtional automatic crawler is suitable for pipes which OD are grater than 6",or plate welding. 64 or 128 element water column
detection, water kackets need to based on pipe OD, water jacket application probes are optional to perform corrosion / basic material inspection. 32 or 16 element probes are optional to perform girth welding two-sided
range OD+/-3mm; inspection. Remote control available to move forward and backward, as well as to control the guide screw to move to left and right(500mm).
Suitable for corrosion detection of small diameter pipe OD40mm~150mm;
The scanner is equipped with encoder, and the magnetic wheel absorbs the
steel pipe with stable coupling and simple operation;
Strong applicability. only need to change water jacket for different pipe diameter,
no need to change probe.
Parameter
Circumferential motion Φ6" (152.4mm)~Flat
jacket application range OD+/-3mm; Maximum load on the vertical plane 6kg
Suitable for corrosion detection of small diameter pipe OD40mm~150mm; Axialmotion Φ1500mm~Flat
The scanner is equipped with encoder, and the magnetic wheel absorbs the
steel pipe with stable coupling and simple operation.
FS-06
Elbow Corrosion Scanner
Applicable pipe diameter range: elbows above
OD102mm;
Scanning device with encoder, C scan imaging
available;
The magnetic wheel is adsorbed on the steel pipe
and the coupling is stable, simple operation;
The flexible probe has strong applicability. It only
needs to replace the water jacket to detect different
pipe diameters, without replacing the probe;
Waterproof registration: IP67
81 Scanners Scanners 82
DSC-06 Application
Corrosion Scanner Weld Detection of Large Tank
Flat plate weld detection
Material or corrosion inspection for large pipe and plate
Base Material Testing
Can use 64 or 128 elements PA probe,water filling as a wedge
Corrosion detection
Wheel encoder to record data
Ultrasound Thickness
Optional magnetic wheel or rubber wheel
Measurement
Probe height adjustable
Encoder IP Level IP 65
StorageTemperature -20°C~ +60°C
OperatingTemperature -10°C~ +50°C
FC-XY02-DD
XY Dual-axis Automated Scanner
GECKO
Doppler XY dual-axis electric sucker automatic scanner can be used for automatic detection of composite plate, aluminium plate and steel
Automated Crawler Scanner plate by ultrasonic phased array; The scanner uses four vacuum suckers,easy to operate, stable and reliable; Two DC motors drive
scanning axis and stepping axis to do two-dimensional scanning, which can set scanning step and scanning area to realize automatic
Specification Features scanning quickly; 64 or 128 element probes can be selected with wedge or water jacket for base metal detection, X/Y dual-axis encoder
can do two-dimensional C-scan imaging;Effective scanning area 800mm*300mm, can customize different effective scanning areas
Real-time acquisition of working environment images Phone WIFI + wired remote controller according to specific inspection needs.
Displacement Reciprocating Accuracy Error <=+/1mm Laser tracking of welds
Speed accuracy erro< 5% Support all orientation movements, with cruise control
When the wall thickness of bare metal magnetic workpiece Multi-probe clamp modes, welds compatible Features
in vertical direction is more than 20 mm, it can carry 20KG Base material & corrosion inspections
Circumferential motion applicable range 800mm-plane, axial Applicable for composite plate, aluminium plate and steel plate;
motion applicable range 500mm-plane 64 or 128 element probes can be selected with wedge or water
Measuring the Thickness of Workpiece (> 5mm) jacket for base metal detection;
Crawler speed range 20mm/s-120mm/s Effective scanning area 800mm*300mm, can customize
Motion speed of power arm is 10 mm/s-130 mm/s different effective scanning areas according to specific
Motion control mode: inspection needs;
Free Motion Model Use vacuum suckers, easy to operate, stable and reliable;
Displacement motion mode Can set scanning step and scanning area to realize automatic
Two-axis scanning mode: raster scanning/sawtooth scanning scanning quickly;
X/Y dual-axis encoder can do two-dimensional C-scan imaging.
83 Scanners Scanners 84