Professional Documents
Culture Documents
TDS Starkfloor 16w
TDS Starkfloor 16w
RECOMMENDED USE
As a primer for damp concrete
As a base coat for any epoxy and polyurethane coating
As satin, semi gloss and gloss top coating
As a cost effective and green material for steel top finish coating
As a cost effective and strong material for coating concrete surfaces
As a multipurpose epoxy coating for wall, ceiling and floor surfaces
COLOURS Many
GLOSS Satin to semi gloss
MIXING RATIO 5:1 by weight of Part A & Part B
PACKAGING Part A : 5 kg Part B : 1 kg
DENSITY 1.2 kg/liter
THINNER Water
COVERAGE 0.1-0.3 kg/m2 (60-200 mm DFT)
POT LIFE 1 hour
DRYING TIME (30ºC) Touch : 5 hours Hard : 12 hours
RECOMMENDED THICKNESS 100 - 200 μm DFT
OVER COATING TIME Min : 12 hours
MIXING METHOD
Stir part A separately then thoroughly mix with part B using medium speed electric
mixer (750 rpm) or using a helical spinner for at least 2 minutes. Do not mix by hand.
Each Part packed already pre-weighed for optimum performance. Never split or
proportion packs.
APPLICATION METHOD
Immediately after mixing, spread the material using a short hair roller or an airless
spray. Could be diluted with water 5-10% after mixing part A & B completed.
FURTHER INFORMATION
Our Sales and Technical Service Department with practical experience built up over
many years especially in flooring and protective coating ready to serve your needs.
Make STARKFLOOR your flooring partner, Contact our hotline number now.