Professional Documents
Culture Documents
TDS Starkfloor P1w
TDS Starkfloor P1w
RECOMMENDED USE
As a primer for concrete
As a primer for any damp surfaces
COLOURS Transparent
GLOSS Full
MIXING RATIO 2:1 by weight of Part A & Part B
PACKAGING Part A : 4 kg Part B : 2 kg
DENSITY 1.08 kg/liter
THINNER Water
COVERAGE 0.1 kg/m2 (50 μm DFT)
POT LIFE 1 hours
DRYING TIME (30ºC) Touch : 3 hours Hard : 6 hours
RECOMMENDED THICKNESS 50 μm DFT
OVER COATING TIME Min : 6 hours
MIXING METHOD
Stir part A separately then thoroughly mix with part B using medium speed electric
mixer (750 rpm) for at least 2 minutes. Do not mix by hand. Each Part packed
already pre-weighed for optimum performance. Never split or proportion packs.
APPLICATION METHOD
Immediately after mixing, spread the material using a brush or short hair roller
ensuring it is worked into all surface irregularities. For porous surface where a
second coat is required, allow the first coat to cure 6 hours and apply the second as
above. Apply STARKFLOOR P1w-CLEAR within its pot life.
HEALTH & SAFETY
FURTHER INFORMATION
Our Sales and Technical Service Department with practical experience built up over
many years especially in flooring and protective coating ready to serve your needs.
Make STARKFLOOR your flooring partner, Contact our hotline number now.