Professional Documents
Culture Documents
How To Make A Powerful Metal Bender 1
How To Make A Powerful Metal Bender 1
by diyfixman
Not just the next project is my most successful project. More than 13 million views on my YouTube channel.
Thousands of people after trying to build this tool and restore my success, but I was the first to think of this
ingenious idea and that's why my video was so successful.
So this is a very simple yet very effective tool! This tool can bend hard irons to precise angles. In order to build the
tool it is first of all important to find a very large bearing as in the picture I attached. There you can see that I put
my hand on a large 25 cm diameter super bearing.
Next, cut 3 pieces of 10mm thick iron plate across the inside diameter of the bearing, then weld the three together
and weld them to the bearing.
At this stage two pieces of a strong steel rod with a diameter of at least 30 mm should be cut. Then the rods
should be welded to the bearing. If my explanation is poor you can always watch the video.
This is how it should be, and again if my explanation is poor you can always watch the video. https://youtu.be/_O6
1sTY67W8
My English is bad, so I recommend anyone who doesn't understand my explanation to watch a video on my
YouTube channel - https://youtu.be/_O61sTY67W8
Thank you very much to all my YouTube followers. Thank you for your great support. You are the ones who
motivate me to make interesting new videos for you. Without you it wouldn't have happened!