Professional Documents
Culture Documents
Supported Coding Options: Acoustic Pedestrian Protection
Supported Coding Options: Acoustic Pedestrian Protection
BMW 3 Series, M3
Enable/disable the checkbox in the settings in the iDrive system to turn the
acoustic pedestrian protection on or off.
Values:
Active
Not active
Requirements:
Acoustical confirmation
Acoustical lock/unlock confirmation
Values:
Active
Not active
Requirements:
Values:
Active
Not active
Requirements:
Values:
Short
Normal
Long
Very long
Requirements:
Values:
Low
Normal
High
Requirements:
Values:
Low
Normal
High
Very high
Requirements:
Values:
Level 1
Level 2
Level 3
Level 4
Requirements:
Values:
60 km/h
70 km/h
80 km/h
90 km/h
100 km/h
110 km/h
Requirements:
Values:
50 km/h
60 km/h
70 km/h
80 km/h
Requirements:
Deactivate the Active Sound Design. Use a backup to revert this coding
once it has been applied.
Values:
Deactivated
Requirements:
Air conditioning
Air circulation setting memory
Values:
Active
Not active
Requirements:
Values:
Active
Not active
Requirements:
Values:
Active
Not active
Requirements:
Values:
Active
Not active
Requirements:
Values:
Active
Not active
Requirements:
Alarm system
Alarm sound
Values:
Ambient lighting
Ambient lighting brightness
Values:
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Requirements:
Values:
Active
Not active
Requirements:
Angel Eyes
Angel Eyes brightness
The brightness of the Angel Eyes with low beam or parking lights. Use a
backup to revert this coding once it has been applied. Please note that this
coding has to be carried out for both headlights (left and right) separately.
Values:
100%
Requirements:
The brightness of the Angel Eyes with low beam. Please note that this
coding has to be carried out for both headlights (left and right) separately.
Values:
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Requirements:
Values:
8%
10%
12%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Requirements:
The brightness of the Angel Eyes with parking lights. Please note that this
coding has to be carried out for both headlights (left and right) separately.
Values:
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Requirements:
Values:
8%
10%
12%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Requirements:
“Front Electronic Module” FEM_01 control unit
Audio
Maximum volume at start-up
The maximum volume that is saved when the iDrive system is shut off and
restored automatically on the next start-up.
Values:
10%
20%
25%
30%
40%
50%
Requirements:
Values:
Ringtone 1
Ringtone 2
Ringtone 3
Smartphone ringtone
Requirements:
Values:
BMW i ringtone
BMW ringtone
Mini ringtone
Smartphone ringtone
Requirements:
“Headunit” HU_NBT or “Headunit” HU_NBT_EVO control unit
Shut off iDrive system when driver door is opened
Enable/disable the automatic shut-off of the iDrive system when the driver
door is opened.
Values:
Active
Not active
Requirements:
The warning chime that sounds when a warning is displayed in the car.
Values:
Requirements:
Values:
Active
Not active
Requirements:
Values:
Active
Not active
Requirements:
Set the Auto Start Stop function to off by default when the car is started.
Please note that the Auto Start Stop function is automatically activated
again in ECO PRO driving mode.
Values:
Active
Not active
Requirements:
Battery
Battery type
The type and capacity of the 12 V battery. Please note that this value must
only be modified if the battery in the car has been replaced. After coding,
the battery replacement has to be registered using “BimmerLink”
additionally.
Values:
20 Ah
40 Ah AGM
46 Ah
55 Ah
70 Ah
70 Ah AGM
80 Ah
80 Ah AGM
90 Ah
90 Ah AGM
105 Ah AGM
Requirements:
Values:
10 km/h
20 km/h
30 km/h
50 km/h
Requirements:
Values:
Requirements:
Values:
5 km/h
10 km/h
20 km/h
30 km/h
40 km/h
50 km/h
Requirements:
Values:
Requirements:
Values:
Brake lights
Not active
Requirements:
The type of the Brake Force Display. The Brake Force Display is activated
during hard braking to warn the following traffic. Please note that you have
to set “Brake Force Display lights” to “Brake lights” in the “Rear Electronic
Module” control unit additionally.
Values:
Area enlargement
Flashing
Not active
Requirements:
Convenient opening/closing
Convenient closing
Enable/disable the convenient closing. During convenient closing the
windows are closed and the power folding mirrors are folded in. To trigger
convenient closing the lock button on the remote control has to be pressed
and held. Please note that this option does not work for convertibles.
Values:
Active
Not active
Requirements:
The delay for the convenient closing before the windows are closed.
Values:
0.5 seconds
1 second
1.5 seconds
No delay
Requirements:
The delay at which the front windows are closed during convenient closing.
Values:
0.5 seconds
1 second
1.5 seconds
No delay
Requirements:
Values:
0.5 seconds
1 second
1.5 seconds
3.5 seconds
No delay
Requirements:
Values:
Active
Not active
Requirements:
Values:
Active
Not active
Requirements:
Values:
Active
Not active
Requirements:
The delay for the convenient opening before the windows are opened.
Values:
0.5 seconds
1 second
1.5 seconds
2 seconds
2.5 seconds
Requirements:
The delay at which the rear windows are opened during convenient
opening.
Values:
0.5 seconds
1 second
1.5 seconds
No delay
Requirements:
Values:
0.5 seconds
1 second
1.5 seconds
3.5 seconds
No delay
Requirements:
Values:
Active
Not active
Requirements:
Values:
Active
Not active
Requirements:
Values:
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Requirements:
Values:
Active
Active also with parking lights
Not active
Requirements:
Enable/disable the inner part of the tail lights with the daytime running
light.
Values:
Active
Not active
Requirements:
Enable/disable the outer part of the tail lights with the daytime running
light.
Values:
Active
Not active
Requirements:
Values:
Active
Requirements:
Values:
Active
Not active
Requirements:
Values:
Active
Not active
Requirements:
Values:
Active
Not active
Requirements:
“Headunit” HU_CIC or “Headunit” HU_NBT or “Headunit”
HU_NBT_EVO control unit
Start animation
The animation that is displayed when the iDrive system is started. Please
note that the animation is not visible every time you start the car, but only
under certain circumstances.
Values:
ALPINA
BMW 1
BMW 2
BMW i
Christmas
Connected Drive 1
Connected Drive 2
M variant 1
MINI variant 1
Rolls Royce
Requirements:
The animation that is displayed when the iDrive system is started. Please
note that the animation is not visible every time you start the car, but only
under certain circumstances.
Values:
ALPINA
BMW i
Connected Drive
M variant 1
M variant 2
MINI John Cooper Works
MINI variant 1
MINI variant 2
Rolls Royce
Requirements:
Values:
Animation
Welcome screen
Requirements:
The displayed values of the tire pressure control in the iDrive system. Please
note that the car has to be equipped with the required sensors to make this
work.
Values:
Requirements:
Active
Not active
Requirements:
The average speed and consumption is reset after the set time
automatically.
Values:
After 4 hours
After 8 hours
After every ride
Never
Requirements:
Enable/disable the display of the date in the board computer. Please toggle
the displayed information in the board computer with the button in the
turn signal lever until the specific display appears.
Values:
Active
Not active
Requirements:
Values:
Active
Not active
Requirements:
Values:
Active
Not active
Requirements:
“Instrument Cluster” KOMBI L7_BASIS or “Instrument Cluster” KOMBI
L6 BO or “Instrument Cluster” KOMBI_CT_RD1 control unit
Fuel consumption display maximum value
Values:
20 l/100km
30 l/100km
Requirements:
Values:
Not active
135i
140i
235i
240i
340i
50d
550d
Plugin Hybrid Electric Vehicle
X2 M40i
Requirements:
The logo that is displayed in the center of the screen during the start-up of
the instrument cluster.
Values:
50d
135i
140i
235i
240i
340i
AG
M Performance
M2
M3
M4
M4 GTS
Plugin Hybrid Electric Vehicle
Requirements:
The logo that is displayed in the center of the screen during the start-up of
the instrument cluster.
Values:
50d
135i
140i
235i
240i
340i
AG
M Performance
M2
M2 Competition
M2 CS
M3
M4
M4 GTS
Plugin Hybrid Electric Vehicle
X2 M35i
Requirements:
Doors/windows
Horn signal when locking the car with engine running
Enable/disable the horn signal that sounds when locking the car with the
engine running.
Values:
Active
Not active
Requirements:
The car is locked automatically again if it has been unlocked and no door
has been opened within the set time.
Values:
10 seconds
30 seconds
1 minute
2 minutes
5 minutes
10 minutes
Requirements:
Values:
Active
Not active
Requirements:
Values:
Active
Not active
Requirements:
“Front Electronic Module” FEM_01 control unit
Driving mode
SPORT+ driving mode (1 of 2)
Add the SPORT+ driving mode for cars that do not have this option by
factory. Please note that “SPORT+ driving mode (2 of 2)” in the “Instrument
Cluster” control unit has to be enabled additionally. Use a backup to revert
this coding once it has been applied. Do not use this if you car already has
the SPORT+ driving mode!
Values:
Active
Requirements:
Add the SPORT+ driving mode for cars that do not have this option by
factory. Please note that “SPORT+ driving mode (1 of 2)” in the “Integrated
Chassis Management” control unit has to enabled additionally. Use a
backup to revert this coding once it has been applied. Do not use this if
you car already has the SPORT+ driving mode!
Values:
Active
Requirements:
Values:
Active
Not active
Requirements:
The protection area limits the rearward travel of the seat when easy entry is
activated.
Values:
0 mm
10 mm
20 mm
30 mm
40 mm
50 mm
60 mm
70 mm
80 mm
90 mm
100 mm
Requirements:
In order to make it easier to get in the car, the seat is automatically moved
back when unlocked and then returns to its original position when the
ignition is switched on. Please note that the car has to be equipped with
electrically adjustable seats with memory function.
Values:
Active
Requirements:
Values:
10 mm
20 mm
30 mm
40 mm
50 mm
60 mm
70 mm
80 mm
90 mm
100 mm
Requirements:
The remaining range at which the permanent low fuel warning is displayed.
Values:
10 kilometers
10 miles
20 kilometers
20 miles
30 kilometers
30 miles
40 kilometers
50 kilometers
Not active
Requirements:
The remaining range at which the temporary low fuel warning is displayed.
Values:
40 miles
50 kilometers
50 miles
60 kilometers
70 kilometers
80 kilometers
90 kilometers
Not active
Requirements:
HUD
HUD music lists
Values:
Active
Not active
Requirements:
Values:
Active
Not active
Requirements:
Values:
Active
Not active
Requirements:
Values:
Active
Not active
Requirements:
Headlight cleaning
Headlight cleaning blocking time
Values:
1 minute
2 minutes
3 minutes
4 minutes
5 minutes
6 minutes
7 minutes
8 minutes
9 minutes
10 minutes
Requirements:
The pause between the injection pulses of the headlight cleaning system.
Values:
200 ms
400 ms
600 ms
800 ms
1000 ms
1200 ms
1400 ms
1600 ms
1800 ms
2000 ms
Requirements:
Values:
10 km/h
20 km/h
30 km/h
40 km/h
50 km/h
60 km/h
70 km/h
80 km/h
90 km/h
100 km/h
110 km/h
120 km/h
130 km/h
140 km/h
150 km/h
Requirements:
Values:
Active
Not active
Requirements:
1 operation
5 operations
10 operations
Requirements:
Values:
1 time
2 times
3 times
Requirements:
The duration of the water injection pulses of the headlight cleaning system.
Values:
200 ms
400 ms
600 ms
800 ms
1000 ms
1200 ms
1400 ms
1600 ms
1800 ms
2000 ms
Requirements:
LED conversion
LED conversion Brake Force Display
Activate this function when the lamps for the corresponding lights have
been replaced with LEDs in order to prevent errors in the vehicle from
being displayed and the LEDs from flickering. Use a backup to revert this
coding once it has been applied.
Values:
Active
Requirements:
Activate this function when the lamps for the corresponding lights have
been replaced with LEDs in order to prevent errors in the vehicle from
being displayed and the LEDs from flickering. Use a backup to revert this
coding once it has been applied.
Values:
Active
Requirements:
Activate this function when the lamps for the corresponding lights have
been replaced with LEDs in order to prevent errors in the vehicle from
being displayed and the LEDs from flickering. Use a backup to revert this
coding once it has been applied.
Values:
Active
Requirements:
Activate this function when the lamps for the corresponding lights have
been replaced with LEDs in order to prevent errors in the vehicle from
being displayed and the LEDs from flickering. Use a backup to revert this
coding once it has been applied.
Values:
Active
Requirements:
Activate this function when the lamps for the corresponding lights have
been replaced with LEDs in order to prevent errors in the vehicle from
being displayed and the LEDs from flickering. Use a backup to revert this
coding once it has been applied.
Values:
Active
Requirements:
Activate this function when the lamps for the corresponding lights have
been replaced with LEDs in order to prevent errors in the vehicle from
being displayed and the LEDs from flickering. Use a backup to revert this
coding once it has been applied.
Values:
Active
Requirements:
Activate this function when the lamps for the corresponding lights have
been replaced with LEDs in order to prevent errors in the vehicle from
being displayed and the LEDs from flickering. Use a backup to revert this
coding once it has been applied.
Values:
Active
Requirements:
Values:
Active
Requirements:
Activate this function when the lamps for the corresponding lights have
been replaced with LEDs in order to prevent errors in the vehicle from
being displayed and the LEDs from flickering. Use a backup to revert this
coding once it has been applied.
Values:
Active
Requirements:
Activate this function when the lamps for the corresponding lights have
been replaced with LEDs in order to prevent errors in the vehicle from
being displayed and the LEDs from flickering. Use a backup to revert this
coding once it has been applied.
Values:
Active
Requirements:
Activate this function when the lamps for the corresponding lights have
been replaced with LEDs in order to prevent errors in the vehicle from
being displayed and the LEDs from flickering. Use a backup to revert this
coding once it has been applied.
Values:
Active
Requirements:
Activate this function when the lamps for the corresponding lights have
been replaced with LEDs in order to prevent errors in the vehicle from
being displayed and the LEDs from flickering. Use a backup to revert this
coding once it has been applied.
Values:
Active
Requirements:
Activate this function when the lamps for the corresponding lights have
been replaced with LEDs in order to prevent errors in the vehicle from
being displayed and the LEDs from flickering. Use a backup to revert this
coding once it has been applied.
Values:
Active
Requirements:
Activate this function when the lamps for the corresponding lights have
been replaced with LEDs in order to prevent errors in the vehicle from
being displayed and the LEDs from flickering. Use a backup to revert this
coding once it has been applied.
Values:
Active
Requirements:
Values:
Active
Requirements:
Activate this function when the lamps for the corresponding lights have
been replaced with LEDs in order to prevent errors in the vehicle from
being displayed and the LEDs from flickering. Use a backup to revert this
coding once it has been applied.
Values:
Active
Requirements:
Activate this function when the lamps for the corresponding lights have
been replaced with LEDs in order to prevent errors in the vehicle from
being displayed and the LEDs from flickering. Use a backup to revert this
coding once it has been applied.
Values:
Active
Requirements:
Activate this function when the lamps for the corresponding lights have
been replaced with LEDs in order to prevent errors in the vehicle from
being displayed and the LEDs from flickering. Use a backup to revert this
coding once it has been applied.
Values:
Active
Requirements:
Lighting
Cornering lights activation
Activate the cornering lights. To make this work, the car has to be equipped
with fog lights. Use a backup to revert this coding once it has been applied.
Values:
Active
Requirements:
Deactivate the factory installed cornering lights. Use a backup to revert this
coding once it has been applied.
Values:
Active
Requirements:
Values:
Active
Not active
Requirements:
Deactivation of the fog lights is necessary if the fog lights are removed,
otherwise error messages will be displayed in the vehicle.
Values:
Requirements:
Enable/disable the automatic switch-off of the fog lights when the high
beam is turned on.
Values:
Active
Not active
Requirements:
Values:
Active
Not active
Requirements:
Values:
Active
Not active
Requirements:
Values:
Insensitive
Normal
Sensititve
Very sensitive
Requirements:
Disable the sidemarkers in US cars. Use a backup to revert this coding once
it has been applied. Please note that this coding has to be carried out for
both headlights (left and right) separately.
Values:
Deactivated
Requirements:
Mirrors
Automatic mirror tilt
Enable/disable the automatic mirror tilt for the right mirror, when the
reverse gear is engaged. Please note that your car has to be equipped with
power folding mirrors. Make sure the button in the door for selecting the
mirror is set to the driver side also.
Values:
Active
Not active
Requirements:
The tilt value of the right mirror, when the reverse gear is engaged.
Values:
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Requirements:
Values:
Active
Not active
Requirements:
The mirrors are folded automatically when the car is locked with the remote
control or Comfort Access and unfolded when the car is unlocked. Please
note that your car has to be equipped with power folding mirrors and that
this option does not work for convertibles. Use a backup to revert this
coding once it has been applied.
Values:
Active
Requirements:
Values:
5 km/h
10 km/h
20 km/h
30 km/h
40 km/h
50 km/h
Requirements:
Values:
5 km/h
10 km/h
20 km/h
30 km/h
40 km/h
50 km/h
Requirements:
Values:
Active
Not active
Requirements:
PDC
Activate PDC when rolling backwards
Enable/disable the automatic activation of the PDC when the car starts
rolling backwards.
Values:
Active
Not active
Requirements:
Values:
Active
Requirements:
Values:
10 m
20 m
30 m
40 m
50 m
100 m
150 m
200 m
250 m
Requirements:
Values:
5 km/h
10 km/h
15 km/h
20 km/h
30 km/h
36 km/h
40 km/h
50 km/h
Requirements:
The speed at which the visual and acoustic PDC warnings are turned off.
Values:
5 km/h
10 km/h
15 km/h
20 km/h
30 km/h
40 km/h
50 km/h
Requirements:
The driven distance after the rear view camera is turned off automatically.
Values:
10 m
20 m
30 m
40 m
50 m
100 m
150 m
200 m
250 m
Requirements:
The speed at which the rear view camera is turned off automatically.
Values:
5 km/h
10 km/h
15 km/h
20 km/h
30 km/h
36 km/h
40 km/h
50 km/h
Requirements:
Retrofit
HiFi loudspeaker system
Values:
Active
Requirements:
Coding of all relevant functions for retrofitted LCI tail lights. Please note
that the wiring of the tail lights may also have to be adapted. You can find
information on this in the manufacturer's installation instructions.
Values:
Active
Requirements:
Values:
Active
Not active
Requirements:
Seat heating
Front backrests temperature level 1
Values:
30 °C
31 °C
32 °C
33 °C
34 °C
35 °C
Requirements:
Values:
36 °C
37 °C
38 °C
39 °C
40 °C
41 °C
Requirements:
Values:
42 °C
43 °C
44 °C
45 °C
46 °C
47 °C
Requirements:
Values:
30 °C
31 °C
32 °C
33 °C
34 °C
Requirements:
Values:
35 °C
36 °C
37 °C
38 °C
39 °C
40 °C
Requirements:
“Front Electronic Module” FEM_01 control unit
Front seats temperature level 3
Values:
41 °C
42 °C
43 °C
44 °C
45 °C
46 °C
Requirements:
Values:
30 °C
31 °C
32 °C
33 °C
34 °C
35 °C
Requirements:
Values:
36 °C
37 °C
38 °C
39 °C
40 °C
41 °C
Requirements:
“Front Electronic Module” FEM_01 control unit
Rear backrests temperature level 3
Values:
42 °C
43 °C
44 °C
45 °C
46 °C
47 °C
Requirements:
Values:
30 °C
31 °C
32 °C
33 °C
34 °C
Requirements:
Values:
35 °C
36 °C
37 °C
38 °C
39 °C
40 °C
Requirements:
“Front Electronic Module” FEM_01 control unit
Rear seats temperature level 3
Values:
41 °C
42 °C
43 °C
44 °C
45 °C
46 °C
Requirements:
Values:
15 minutes
24 hours
Do not save
Unlimited
Requirements:
Seatbelt reminder
Initial seat belt reminder after start
Activate/deactivate the initial acoustic seat belt reminder after the car is
started.
Values:
Active
Not active
Requirements:
“Advanced Crash Safety Module” ACSM_4B or “Advanced Crash
Safety Module” ACSM_4C control unit
Seat belt indicator driver seat
Activate/deactivate the seat belt indicator in the instrument cluster for the
driver seat.
Values:
Active
Not active
Requirements:
Activate/deactivate the seat belt indicator in the instrument cluster for the
passenger seat.
Values:
Active
Not active
Requirements:
Activate/deactivate the seat belt indicator in the instrument cluster for the
rear seats.
Values:
Active
Not active
Requirements:
50 m
100 m
200 m
500 m
Requirements:
Activate/deactivate the acoustic and visual seat belt reminder for the driver
seat.
Values:
Active
Not active
Requirements:
Values:
5 seconds
10 seconds
15 seconds
20 seconds
30 seconds
45 seconds
60 seconds
90 seconds
100 seconds
Requirements:
Values:
Active
Not active
Requirements:
Values:
8 km/h
10 km/h
20 km/h
30 km/h
40 km/h
50 km/h
Requirements:
Values:
15 km/h
No speed limit
Requirements:
Values:
15 km/h
No speed limit
Requirements:
Sport displays
Sport displays
Enable/disable the Sport displays in the iDrive system. Please note that in
some cars the engine control unit does not transmit the required values to
the headunit and in this case the Sport displays will be displayed but
remain functionless.
Values:
Active
Not active
Requirements:
Values:
Orange
Red
Requirements:
Tailgate
Boot lid opening delay
The delay when opening the boot lid with the remote control. This value
can be increased to prevent accidental openings of the boot lid.
Values:
0.5 seconds
1 second
5 seconds
10 seconds
No delay
Requirements:
Values:
Active
Not active
Requirements:
Enable/disable the closing of the tailgate with the button in the interior
without a long press.
Values:
Active
Not active
Requirements:
Values:
Active
Not active
Requirements:
Values:
Active
Not active
Requirements:
Values:
Active
Not active
Requirements:
The tailgate function that is triggered when the button on the remote is
pressed.
Values:
Open
Open and close
Requirements:
The tailgate function that is triggered when the button in the interior is
pulled up.
Values:
Close
Deactivated
Requirements:
The tailgate function that is triggered when the button in the interior is
pushed down.
Values:
Deactivated
Open
Open and close
Requirements:
A warning signal sounds when the tailgate is closed with the remote
control.
Values:
Active
Not active
Requirements:
A warning signal sounds when the tailgate is closed with the button in the
interior.
Values:
Active
Not active
Requirements:
Transmission
Sport Automatic Transmission
Active
Not active
Requirements:
Turn signals
Turn signals flashing on locking
Values:
1 time
2 times
3 times
Off
Requirements:
Values:
1 time
2 times
3 times
Off
Requirements:
US sidemarkers
US sidemarker brightness
Values:
Off
Very low
Low
Medium
Relatively high
High
Very high
Requirements:
Values:
Standing lights
Daytime running light
Requirements:
Values:
Requirements:
Video
Additional video codecs and formats
Activate additional video codecs and formats (Ogg, Xvid and VCD). Use a
backup to revert this coding once it has been applied.
Values:
Active
Requirements:
“Headunit” HU_NBT or “Headunit” HU_NBT_EVO control unit
Video in motion
Activate video in motion. Use a backup to revert this coding once it has
been applied.
Values:
Active
Requirements:
Enable video in motion. Please note the instructions displayed after coding.
Values:
Active
Not active
Requirements:
Enable video playback from USB storage media. Use a backup to revert this
coding once it has been applied.
Values:
Active
Requirements:
Warnings
Camera warning
Disable the warning that is displayed when using one of the cameras. Use a
backup to revert this coding once it has been applied.
Values:
Not active
Requirements:
“Headunit” HU_CIC or “Headunit” HU_NBT or “Headunit”
HU_NBT_EVO control unit
Night vision warning
Disable the warning that is displayed when using the night vision camera.
Use a backup to revert this coding once it has been applied.
Values:
Not active
Requirements:
Disable the warning that is displayed when the iDrive system is started. Use
a backup to revert this coding once it has been applied.
Values:
Not active
Requirements:
Welcome Lights
Welcome Light activation
The position of the light switch at which the Welcome Light is activated.
Values:
Requirements:
Values:
Active
Not active
Requirements:
Values:
5 seconds
10 seconds
15 seconds
20 seconds
30 seconds
45 seconds
60 seconds
Requirements:
The brightness of the Welcome Lights. Please note that this option only
works for cars equipped with halogen or xenon headlights.
Values:
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Requirements:
Values:
Hard on
Not active
Soft on
Requirements:
The cornerning lights are turned on with the Welcome Lights. Please note
that this option only works for cars equipped with halogen or xenon
headlights.
Values:
Hard on
Not active
Soft on
Requirements:
The daytime running light is turned on with the Welcome Lights. Please
note that this option only works for cars equipped with halogen or xenon
headlights.
Values:
Hard on
Not active
Soft on
Requirements:
The design lights are turned on with the Welcome Lights. Please note that
this option only works for cars equipped with halogen or xenon headlights.
Values:
Hard on
Not active
Soft on
Requirements:
The fog lights are turned on with the Welcome Lights. Please note that this
option only works for cars equipped with halogen or xenon headlights.
Values:
Hard on
Not active
Soft on
Requirements:
The front turn signals are turned on with the Welcome Lights. Please note
that this option only works for cars equipped with halogen or xenon
headlights.
Values:
Hard on
Not active
Soft on
Requirements:
The high beam 1 is turned on with the Welcome Lights. Please note that
this option only works for cars equipped with halogen or xenon headlights.
Values:
Hard on
Not active
Soft on
Requirements:
The high beam 2 is turned on with the Welcome Lights. Please note that
this option only works for cars equipped with halogen or xenon headlights.
Values:
Hard on
Not active
Soft on
Requirements:
The low beam is turned on with the Welcome Lights. Please note that this
option only works for cars equipped with halogen or xenon headlights.
Values:
Hard on
Not active
Soft on
Requirements:
The daytime parking lights are turned on with the Welcome Lights. Please
note that this option only works for cars equipped with halogen or xenon
headlights.
Values:
Hard on
Not active
Soft on
Requirements:
Values:
Hard on
Not active
Soft on
Requirements:
Window cleaning
Automatic rear wiper in reverse
Values:
Active
Not active
Requirements:
1 time
2 times
3 times
4 times
5 times
Requirements:
Values:
1 time
2 times
3 times
4 times
5 times
Requirements:
Enable/disable the automatic switch back of the wiper level when the car
becomes stationary.
Values:
Active
Not active
Requirements: