Professional Documents
Culture Documents
en 13445 5
en 13445 5
en 13445 5
134455 非火焰接触压力容器_百度文库
EN 13445-5 非火焰接触压力容器 3 百度一下 帮助
FE162436
全部 DOC PPT TXT PDF XLS
百度文库
首页
专业资料 工程科技
分类
European standard
机械/仪表
教育文库 精品文库 个人认证 机构合作
NF EN 1344
文库VIP 高考2015
EN 13445-5 非火焰接触压力容器
洲
欧 压
力容
器制
(60人评价)
造标
准,
第5
卷
|
,
制造
过程
中
French standard
4230人阅读
的
检测
|
。其
中
512次下载
主
要以
无损
检
|
测
为主
。检
测
举报文档
方
法
主要
包括
常
规
的目
视
检测
,
渗透
检测
,
磁
粉检
测
,
超声
检
测,
射线
检
测。
对
其适
用
范围
检
测试
剂,
整体
检测
流程
,
检测 Classification index:
French standard approved
by decision of the Director General of AFNOR on September 2, 2009 taking effe
October 2, 2009.
Replaces the approved standard NF EN 134455, dated September 2002 and its
A1 dated September 2007, A2 dated November 2005, A3 dated August 2006, A4
March 2007, A5 dated December 2006 and A10 dated November 2008.
Analysis This document defines the requirements for inspection and control of pressure ve
subjected to flame. The six other parts of this document set the scope, terms, de
symbols and units, the requirements for the materials, design and manufacturing
additional requirements for spheroidal graphite cast iron vessels and aluminum v
All parts NF EN 134451 to NF EN 134456 and NF EN 134458 are intended to
the essential requirements of European Directive 97/23/EC "Pressure Equipmen
Modifications With respect to the replaced documents, revision into a new edition (see Annex Y
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 1/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
Modifications
Corrections
© AFNOR 2009 AFNOR 2009 1
Saga intranet pour : BUREAU VERITAS
NF EN 134455 V1:2009 —2—
National foreword
Version 1 of the new 2009 edition of standard NF EN 13445 replaces the 2002 edition by incorporating
amendments and corrected pages having been subject to versions 2 to 36, without any further technical
modification.
Amendments to this new edition will be adopted in the future. They will be published in a separate form before
being incorporated into the next version that is expected to be published annually.
At the French level, AFNOR will provide these various documents in the form of versions, amendments and c
rections identified as follows:
Document type Identification
Version : Full text of the standard, freestanding NF EN 13445-5 V1
NF EN 13445-5 V2
…
Amendment : identification of modifications and/or technical additions to NF EN 13445-5/A1
the text of the current version
…
Correction : corrected pages to replace the corresponding pages of NF EN 13445-5/AC1
version N to produce version N+1 …
For example, NF EN 13445-5/AC1 gives pages that have been corrected
in Version 1 to produce Version 2
The current version, the pages corrected with respect to the previous version, the amendments adopted at a
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 2/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
later than the current version will be available simultaneously at the AFNOR sites. Any previous document wil
obtained from AFNOR at the address: norminfo@afnor.org.
EXAMPLE Given the adoption of EN 13445-5/A1 in January 2010 and EN 13445-5/A2 in November 2010, the following
documents will be available from AFNOR:
2009 2010
09 10 11 12 01 02 03 04 05 06 07 08 09 10 11 12
NF EN 13445-5 V1 xx xx xx xx xx xx xx xx xx xx xx xx x x x x
NF EN 13445-5/A1 — — — — — xx xx xx xx xx xx xx x x x x
NF EN 13445-5 V2 — — — — — — — — — — — — xx xx xx xx
NF EN 13445-5/AC1 — — — — — — — — — — — — xx xx xx xx
NF EN 13445-5/A2 — — — — — — — — — — — — — — — xx
xx: document available
x: document upon request
—: document not available
Saga intranet pour : BUREAU VERITAS
EUROPEAN STANDARD EN 13445-5
NORME EUROPÉENNE
EUROPÄISCHE NORM July 2009
ICS 23.020.30 Supersedes EN 1344
English Version
Unfired pressure vessels Part 5: Inspection and testing
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 3/65
7/11/2015
Unfired pressure vessels Part 5: Inspection and testing
EN 134455 非火焰接触压力容器_百度文库
Récipients sous pression non soumis à la flamme Partie 5 Unbefeuerte Druckbehälter Teil 5: Inspektio
: inspection et contrôles
This European Standard was approved by CEN on 30 June 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
Standard the status of a national standard without any alteration. Uptodate lists and bibliographical references concerning su
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same s
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, F
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Polan
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
C O M I T É E U R O P É E N D E N O R M A L I S A T I O N
EUR OP ÄIS CHES KOM ITEE FÜR NOR MUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
Saga intranet pour : BUREAU VERITAS
EN 13445-5:2009 (E)
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 4/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
EN 13445-5:2009 (E)
Issue 1 (2009-07)
Contents
Foreword.............................................................................................................................................................
1 Scope.....................................................................................................................................................
2 Normative references...........................................................................................................................
3 Terms and definitions ..........................................................................................................................
4 Performance of inspection and testing.............................................................................................
4.1 General...................................................................................................................................................
4.2
4.3 Inspection..............................................................................................................................................
Non-destructive testing (NDT).............................................................................................................
5 Technical documentation ....................................................................................................................
5.1 General...................................................................................................................................................
5.2 Information to be contained in the technical documentation.........................................................
5.2.1 General description of the pressure vessel......................................................................................
5.2.2 Conceptual design and construction drawings..............................................................................
5.2.3 Descriptions and explanations necessary for an understanding of the drawings and diagram
and the operation of the pressure vessel........................................................................................
5.2.4 Results of design calculations and examinations carried out.......................................................
5.2.5 Test reports.........................................................................................................................................
5.2.6 Technical/manufacturing schedule...................................................................................................
5.3 Design review......................................................................................................................................
5.3.1 General.................................................................................................................................................
5.3.2 Design review......................................................................................................................................
6 Inspection and testing during fabrication........................................................................................
6.1 General.................................................................................................................................................
6.2 Manufacturing procedures and construction drawings.................................................................
6.3 Material traceability............................................................................................................................
6.3.1 General.................................................................................................................................................
6.3.2 Special Conditions - Material marking .............................................................................................
6.4 Preparation for manufacturing processes.......................................................................................
6.4.1 General.................................................................................................................................................
6.4.2 Joint preparation testing....................................................................................................................
6.4.3 Inspection of vessel supports...........................................................................................................
6.4.4 Inspection associated with forming..................................................................................................
6.4.5 Testing of areas subject to significant through thickness tensile stress.....................................
6.5 Welding................................................................................................................................................
6.5.1 General.................................................................................................................................................
6.5.2 Verification of welder and welding operator approval and procedures approval.......................
6.5.3 Inspection of repairs ..........................................................................................................................
6.6 Non-destructive testing of welded joints.........................................................................................
6.6.1 Extent of non-destructive testing......................................................................................................
6.6.2 Determination of extent of non-destructive testing........................................................................
6.6.3 Performing non-destructive testing..................................................................................................
6.6.4 Description and acceptance level assessment of imperfections..................................................
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 5/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
6.6.4 Description and acceptance level assessment of imperfections..................................................
6.6.5 Stage of performance.........................................................................................................................
6.6.6 Procedure for non-destructive retesting..........................................................................................
6.6.7 Non-destructive testing documentation...........................................................................................
6.7 Destructive testing..............................................................................................................................
6.7.1 Extent of destructive testing.............................................................................................................
6.7.2 Schedule for destructive testing.......................................................................................................
6.7.3 Verification of destructive tests........................................................................................................
6.7.4 Records................................................................................................................................................
6.8 Heat-treatment.....................................................................................................................................
2
Saga intranet pour : BUREAU VERITAS
EN 13445-5:
Issue 1 (
7 Subcontracted elements..................................................................................................................
7.1 General...............................................................................................................................................
7.2 Subcontracted welding related activities......................................................................................
7.3 Subcontracted non-destructive testing activities........................................................................
7.3.1 Use of contract NDT personnel at the premises of the vessel manufacturer..........................
7.3.2 Subcontracting of NDT at a subcontractors premises................................................................
8 Miscellaneous tests..........................................................................................................................
9 Calibration.........................................................................................................................................
9.1 General...............................................................................................................................................
9.2 Calibration procedure......................................................................................................................
9.2.1 General...............................................................................................................................................
9.2.2 Calibration.........................................................................................................................................
9.2.3
9.3 Frequency..........................................................................................................................................
Identification .....................................................................................................................................
9.4 Registration.......................................................................................................................................
10 Final assessment..............................................................................................................................
10.1 General...............................................................................................................................................
10.2 Extent of final assessment.............................................................................................................
10.2.1 Visual and dimensional inspection................................................................................................
10.2.2 Review of documentation................................................................................................................
10.2.3 Proof test...........................................................................................................................................
10.2.4 Post pressure test inspection........................................................................................................
10.2.5 Inspection of safety accessories...................................................................................................
11 Marking and declaration of compliance with the standard.........................................................
11.1 General...............................................................................................................................................
11.2 Marking method................................................................................................................................
11.2.1 Direct stamping.................................................................................................................................
11.2.2
11.3 Nameplate..........................................................................................................................................
Marking units ....................................................................................................................................
11.4 Marking contents..............................................................................................................................
11.5 Declaration of compliance with the standard...............................................................................
12 Records..............................................................................................................................................
12.1 Type of records.................................................................................................................................
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 6/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
12.1 Type of records.................................................................................................................................
12.2 Control and access of records.......................................................................................................
12.3 Retention of records.........................................................................................................................
13 Shipping.............................................................................................................................................
Annex A (normative) Inspection and testing of serially produced pressure vessels Model accepta
Annex B (normative) Detailed dimensional requirements for pressure vessels....................................
Annex C (normative) Access and inspection openings, closing mechanisms and special locking
elements............................................................................................................................................
Annex D (informative) Leak Testing............................................................................................................
Annex E (informative) Acoustic emission...................................................................................................
Annex F (normative) Inspection and testing of pressure vessels or parts subject to creep...............
Annex G (normative) Inspection and testing of pressure vessels subject to cyclic loads...................
Annex H (informative) Declaration of compliance with this standard.....................................................
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 7/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 8/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 9/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 10/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 11/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 12/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 13/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 14/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 15/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 16/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 17/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 18/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 19/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 20/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 21/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 22/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 23/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 24/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 25/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 26/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 27/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 28/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 29/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 30/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 31/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 32/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 33/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 34/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 35/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 36/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 37/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 38/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 39/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 40/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 41/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 42/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 43/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 44/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 45/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 46/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 47/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 48/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 49/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 50/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 51/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 52/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 53/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 54/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 55/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 56/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 57/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 58/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 59/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 60/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 61/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 62/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
浏览后50页
阅读已结束,如果下载本文需要使用
0下载券 下载
想免费下载本文? 文档免下载券下载特权
全站付费文档8折起
立即加入VIP
千本精品电子书免费看
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 63/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
今日推荐
毕业论文写作与答辩指导 2015上半年计算机等级考试 笑翻神图
硕士毕业论文范本 《VB语言程序设计》专家预测试题 爆笑图片集锦
计算机专业毕业论文范文 计算机三级软件测试技术基础常见问题集 搞笑图片乐翻
80份文档 毕业论文答辩通用性模板 120份文档 二级java考前押密试题 78份文档 cs3简单制作
您的评论
写点评论支持下文档贡献者~
用户评价
暂无评论
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 64/65
7/11/2015 EN 134455 非火焰接触压力容器_百度文库
©2015 Baidu 使用百度前必读 | 文库协议 | 网站地图
http://wenku.baidu.com/view/6a44cb69a45177232f60a275.html 65/65