Professional Documents
Culture Documents
Optoisolation and Optical Sensor Products: Selection Guide
Optoisolation and Optical Sensor Products: Selection Guide
Optoisolation and Optical Sensor Products: Selection Guide
Selection Guide
52 Package Drawings
61 Function vs Application Matrix
Optical Sensors
63 Proximity and Ambient Light Sensors
Avago Technologies offers the
industry’s best isolation technology
along with the industry’s leading
CMR performance
Avago Technologies optocouplers can be used in an array of isolation applications ranging
from power supply and motor control circuits to data communications and digital logic
interface circuits.
The primary purpose of an optocoupler is to provide both electrical insulation and signal
isolation. The popularity of Avago Technologies optocouplers is due to cost effective
innovations in these areas.
Optocouplers eliminate the effects of electrical noise caused by crosstalk, power glitches and
electrical interference. They provide high voltage isolation allowing safe interface between
high and low voltages in electrical circuits. They are also used for shifting logic levels.
Avago Technologies’ key products include optocouplers with phototransistor output,
digital and analog output, high speed and high gain performance, drivers for isolated
gate transistors and intelligent power modules, smart current sensors, solid state relay
(Photo MOSFET) and other application specific devices.
Avago Technologies offers the industry’s best isolation technology along with the industry’s
leading CMR performance of up to 40 kV/µs in a broad line of packages. Products include
the lowest power dissipation with input current as low as 40 µA, high speed digital
optocouplers operating at up to 50 MBd, propagation delays as low as 22 ns, 3.3 V JEDEC
compatible optocouplers. Avago Technologies’ optocouplers are manufactured with high
quality and reliability and have worldwide safety approvals including the highest maximum
insulation voltage (VIORM) at 2262 V (per IEC/EN/DIN EN 60747-5-2/5).
3
Avago Technologies offers a broad range of isolation products
that provide performance features and benefits that are
unmatched in the industry for industrial, computing, consumer,
communication, medical, military and aerospace markets.
Applications for Avago Technologies’ Isolation Products
Industrial Medical • Telephone switching
The widest portfolio of Avago Technologies equipment
optocouplers to meet the offers optocouplers with • Telephone terminal
extensive requirements high linearity and high equipment
of applications in factory resolution for severe • Wireless base station
automation. isolation requirements to: Consumer Electronics
• Automated test equipment • Defibrillators Avago Technologies
• Battery operated vehicle • ECG/EKG offers lower solution costs
• Fieldbus • Endoscopes with highly integrated
• Industrial communications • Magnetic resonance optocouplers for many
• Industrial networking imaging consumer applications,
• Motor control • Patient monitoring such as:
• PLC input/output isolation Computers and Office • Air conditioning
• Power distribution systems Equipment • Alarm systems
• Power generation Avago Technologies’ • Audio and video
• Renewable energy power optocouplers with CMOS equipment
generation compatibility and high • Electronic gaming
• Robotics speed are used to provide • Fitness equipment
• Switching panel interface isolation for: • Induction cookers
• Switching power supplies • Isolated input/output • Plasma displays
• Test and measurement module • Washing machines
equipment • Isolated USB hub Military and Aerospace
Automotive • Printers and plotters Avago Technologies’
Avago Technologies Communications high reliability hermetic
automotive R2Coupler™ are Avago Technologies optocouplers are suitable
AEC-Q100 qualified with provides high speed for military, aerospace
applications in: optocouplers in both single and harsh industrial
• Automotive and shipboard and dual surface-mount applications such as:
system CANBus interface packages which are used in: • Switching power
isolation supplies /UPS
• Automated metering
• Motor inverter drives reading • Motor control
• DC-DC converters/inverters • Digital cross connect • Field bus
for battery chargers • Inverters
• Distributed power
• Battery/inverter voltage architecture • Power distribution
monitoring
• ISDN • Communications
• Status/fault signal
• Modems
feedback isolation
interface • PBX and central office
• Heating, ventilation and • Power line communication
air-conditioning • Power over ethernet
4 Avago, Avago Technologes, the A logo, R2Coupler are trademarks of Avago Technologies in the United States and other countries.
Quick Guide to Direct Upgrades
Noise Isolation
High CMR Offers guaranteed CMR performance up to 40 kV/μs which is Improves system performance, and reliability. More
Common-mode transient rejection or signal isolation of data the highest available in the market. robust systems and better data integrity meet EMI and ESD
through suppression of noise transients. requirements.
Power Consumption
Drive Current, IF Offers the lowest IF (as low as 40 μA) devices in the market Eliminates additional LED drive circuitry. Improves
Low Drive Current, LED drive current. and broadest HCMOS compatibility. system efficiency and reduces power consumption and LED
degradation.
Lower Power Supply Lower the power consumption and meets JEDEC low voltage Up to 50% energy saving.
Lower power supply (3.3V) requirements.
Flexible Supply Voltages Support a combination of two different supply voltages at the Built-in internal level shifter, eliminate the need of extra
(3.3V/5V) input and output. power supply. 3.3V or 5V.
3.3V helps to improve the overall power consumption.
Temperature
Temperature Support up to -55°C to 125°C temperature range. Allow extreme temperature operation.
The DC, speed performance and the reliability information is
ensured at the specific temperature range.
Speed Benefits
Propagation Delay, tp High speed digital optocouplers to meet wide range of Increase switching efficiency and better speed performance.
Describes how quickly a logic signal can propagate through applications with tp as low as 22 ns.
the system.
Upgrade Pulse Width Distortion, PWD The lowest PWD offered by optocoupler is 2 ns. To ensure signal data integrity over long bus line.
PWD is the difference between tPHL and tPHL and often
determines the maximum data rate capability of a
transmission system.
5
Digital Optocouplers
10MBd Family
HCPL-M600/01/11 ACPL-M61L • More than 80% power saving. Drop-in replacement
HCPL-M600/01/11/0L • Low forward current (If) to allow direct
HCPL-0600/01/11/1A/1N/0L ACPL-061L^ drive from microcontroller. Drop-in replacement
• Wider temperature range (-40°C to 105°C).
HCPL-0630/31/3A/3N ACPL-064L • Wider supply voltage (2.7V-5.5V). Drop-in replacement
HCPL-060L • CMOS output to eliminate pull-up resistor.
ACPL-W611/W60L/P611 ACPL-W61L Smaller footprint
HCPL-2601/11/1A/1N
HCPL-260L
HCPL-7601/11
ACPL-K63L ACPL-K64L Smaller footprint
HCPL-2630/31/3A/3N
HCPL-260L
HCPL-4661
HCPL-0600/01/11/1A/1N ACSL-6210/6300/6310/6400/6410/6420 • Multi-channel, bidirectional Smaller footprint
HCPL-M600/01/11 • Wide temperature (-40°C to 100ºC)
HCPL-2601/11/1A/1N • Flexible supply voltages (3.3V/5V)
HCPL-260L/3L
HCPL-0630/31/3A/3N/61
HCPL-2630/31/3A/3N
HCPL-4661
HCPL-7601/11
HCPL-M611 ACPL-M61U • Wide temperature (-40°C to 125ºC) Drop-in replacement
R2Coupler™ • Low LED input drive current IF=10mA
6
Existing Parts Upgrade Parts Upgrade Features Footprint Information
1MBd Family
HCPL-050L/0500/0501 ACPL-M50L • 80% power consumption saving Smaller footprint
• Low forward current (IF > 3mA min)
HCPL-053L/0530/0531 ACPL-054L • High CTR rato >90% min @ IF=3mA Drop-in replacement
6N135, 6N136 ACPL-W50L • Wide temperature range (-40°C to 105°C) Smaller footprint
HCPL-250L/2502/2503 • Wide supply voltage (2.7V to 24V)
• Excellent CMR performance 15kV/µs @ Vcm 1500V
HCPL-253L/22230/2531/2533 ACPL-K54L • Part specific (For ACPL-W50L/K54L) : Smaller footprint
• • Offer higher working insulation voltage
1140Vpeak, isolation voltage, 5000Vrms
7
Existing Parts Upgrade Parts Upgrade Features Footprint Information
8
Existing Parts Upgrade Parts Upgrade Features Footprint Information
9
Optoisolation and Optical Sensor Products
12C Interface
GND2 GND1
10
Optoisolation and Optical Sensor Products
Rx 6 3
0.01µF
5 4
Shield
1 8 8
1 V CC
0.01µF R
Tx 2 7
0.01µF 6
4 A +
3 6 D
0.01µF
4 5 RT
Shield 75ALS176D
3 7
DE B –
ACPL-061L^
ISO 5V
5V 1 8
2 RE
680 GND
2 7 kΩ
0.01µF 5
1 kΩ
3 6 0.01µF 1M
Tx
Enable 4 5
Shield
11
Optoisolation and Optical Sensor Products
V1 2 7 NC
LED1 IO
3 6 VO
GND1 4
Shield
5 GND 2 ACPL-772L-000E 300 mil DIP8 3.3/5 – 25 40 40 6 20 10000 1000 3750/5000 # 630*
V DD1 1 8 VDD2
HCPL-0710 SO8 5 – 12.5 40 40 8 20 10000 1000 3750 567*
V1 2 7 NC HCPL-0720 SO8 5 – 25 40 40 8 20 10000 1000 3750 567*
LED1 IO
3 6 VO
HCPL-0721 SO8 5 – 25 40 40 6 20 10000 1000 3750 567*
GND1 4 5 GND 2
CATHODE 2
3 GND
NC 1
ACPL-M75L
8 VDD ACPL-071L-000E SO8 3.3/5 10 15 40 40 25 30 10000 1000 3750 567*
ANODE 2 7 NC
CATHODE 3 6 VO
NC 4 5 GND
ANODE 1
HCPL-0708
6 VDD
ACPL-W70L-000E Stretched SO6 3.3/5 4 15 55 55 25 40 10000 1000 5000 1140*
NC* 2
ACPL=071L 5 VO
CATHODE 3
4 GND
NC 1
ACPL-W70L
8 VDD HCPL-0708 SO8 5 10 15 60 60 30 40 10000 1000 3750 567*
ANODE 2 7 NC
CATHODE 3 6 VO
NC 4 5 GND
Dual Channel LED Input ACPL-074L-000E SO8 3.3/5 10 15 40 40 25 30 10000 1000 3750 567*
HCPL-0708
ANODE 1 1 ACPL=071L
8 VDD2
7 VO1
CATHODE 1 2
CATHODE 2 3
6 VO2
ANODE 2 4 5 GND
ANODE 1 1
HCPL-0738 8 VDD
ACPL-K73L-000E Stretched SO8 3.3/5 4 15 55 55 25 40 10000 1000 5000 1140*
CATHODE 1 2 ACPL=074L 7 VO1
CATHODE 2 3 6 VO2
ANODE 2 4 5 GND
ANODE1 1
ACPL-K73L 8 VDD2
HCPL-0738 SO8 5 10 15 60 60 30 40 10000 1000 3750 567*
7 VO1
CATHODE1 2
CATHODE2 3
6 VO2
ANODE2 4 5 GND
Notes: * - HCPL-0738
with IEC/EN/DIN EN 60747-5-2/5 Option 060, # - with UL5000VRMS/1 minute Option 020
^ -ACPL=074L
Advanced Information, may subject to changes.
12
Optoisolation and Optical Sensor Products
Description Benefits
These optocouplers have high data rate • Totem pole & tri state output (with enable
capability and low input current require- pin for HCPL-2400) to eliminate output
ments. In analog-to-digital converters, pull-up resistors
designers should isolate the two portions • Certified with reinforced insulation under
of a circuit so that interference generated IEC/EN/DIN EN 60747-5-2/5, approved
Applications by digital switching and clock signals are with Viorm=630Vpeak (option 060)
not coupled to the analog section. The
• Computer-peripheral • DIP8 package (for min. 7mm creepage/
below figure demonstrates the ability of
interface clearance need) with 5kV Viso protection
optocouplers to achieve isolation in a high
• High speed disk drive I/O speed parallel interface data communica- (option 020)
• Isolated bus driver tion application. Optocouplers reduce the • 2-channel for higher integration and
(networking applications) channel distortion and thereby maximize space saving (HCPL-2430)
the reliability of the circuit.
• Isolation of higher speed
logic system
• Switching noise
elimination Typical Block Diagram
V CC1 V CC2
V CC END OF
EN CONVERSION
A.D
Converter
(ADC60-08) V CC
STATUS
ANALOG IN SERIAL IN A QA
EN SERIAL IN B
8-BIT
SERIAL OUT
DIGITAL
Shift DATA
Register QH
CLOCK OUT
(74164)
CLOCK IN
CLEAR
DATA
EN GND ACCEPTED
GND CONVERT
BEGIN
CONVERSION
EN
4 NC 5
GND
Dual Channel HCPL-2430 300 mil DIP8 4 60 60 25 35 1000 300 3750 630*
ANODE 1 1 8 VCC
CATHODE 1 2 7 VO1
ANODE 1 1 8 VCC
CATHODE 2 3 6 VO2
CATHODE 1 2 7 VO1
ANODE 2 4 5 GND
CATHODE 2 3 6 VO2
ANODE 2 4 5 GND
13
Optoisolation and Optical Sensor Products
Digital
Logic 3 4
VCC1 ACPL-M61L
R4 RS422
R3
OUTPUT
4 3
Typical Power over Ethernet Power Source Block Diagram
Power over
signal pairs
Rx
Ethernet Switch/Hub
Tx
ACPL-064L
Optocoupler
3.3V
3.3V
RJ-45
SDA_OUT
Hot-Swap Controller
Host Controller
GND2
12C Interface
12C Interface
SDA_IN – +
SDA
48-V
SCL Power
SCL Supply Power over
GND1 spare pairs
14
Optoisolation and Optical Sensor Products
CATHODE 3
Shield
4 GND
ACPL-W611-000E Stretched SO6 5 5 100 100 35 40 10000 1000 5000 1140*
NC 1 8 VCC
6N137 300 mil DIP8 5 5 100 100 35 40 1000 10 3750/5000# 630*
ANODE 2 7 VE HCNW137 400 mil DIP8 5 5 100 100 40 40 5000 1000 5000 1414
CATHODE 3
NC 4
6
5
VO
GND
HCNW2601 400 mil DIP8 5 5 100 100 40 40 10000 1000 5000 1414
Shield
HCNW2611 400 mil DIP8 5 5 100 100 40 40 15000 1000 5000 1414
HCPL-060L SO8 3.3/5 5 90 75 25 40 15000 1000 3750 567*
HCPL-260L 300 mil DIP8 3.3/5 5 90 75 25 40 15000 1000 3750/5000# 630*
ANODE 1 4 V
CC
5 VOUT HCPL-061A SO8 5 3 100 100 45 60 1000 50 3750 567*
CATHODE 3 6 GND
HCPL-061N SO8 5 3 100 100 45 60 1000 1000 3750 567*
HCPL-0600 SO8 5 5 100 100 35 40 5000 1000 3750 567*
HCPL-0601 SO8 5 5 100 100 35 40 15000 1000 3750 567*
HCPL-0611 SO8 5 5 100 100 35 40 15000 1000 3750 567*
ANODE 1 1 8 VCC
CATHODE 1 2 7 V01 HCPL-2601 300 mil DIP8 5 5 100 100 35 40 10000 1000 3750/5000# 630*
CATHODE 2 3 6 V02
HCPL-2611 300 mil DIP8 5 5 100 100 35 40 15000 1000 3750/5000# 630*
ANODE 2 4 5 GND
NC 1 8 VCC HCPL-261N 300 mil DIP8 5 3 100 100 45 60 1000 1000 3750/5000# 630*
ANODE 2 7 VE ACPL-M60L-000E SO5 3.3/5 5 90 75 25 40 15000 1000 3750 567*
CATHODE 3 6 V0
ANODE 1 6 VCC ACPL-M61U-000E SO5 5 5 100 100 35 40 15000 1000 3750 –
NC 4 Shield
5 GND
CA
CATHODE 3
5 VO
4 GND
HCPL-M600 SO5 5 5 100 100 35 40 – – 3750 –
HCPL-M601 SO5 5 5 100 100 35 40 5000 50 3750 –
HCPL-M611 SO5 5 5 100 100 35 40 10000 1000 3750 –
NC 11
ANODE 6 VVCC
10 CC ACNV2601-000E NEW 500 mil DIP10 5 5 100 100 40 40 20000 1500 7500 2262
ANODE 2 95 VVOE
CATHODE 3
CATHODE 3
4 GND
8 V0 ACNV260E-000E NEW 500 mil DIP10 5 5 100 100 40 40 20000 1500 5000 ATEX
NC 4
Shield
7 GND (375V)
NC 5 6 NC
Dual Channel ACPL-K63L-000E Stretched SO8 3.3/5 5 90 75 25 40 15000 1000 5000 1140*
HCPL-063A SO8 5 3 100 100 45 60 1000 50 3750 567*
ANODE1 1 8 VCC
CATHODE1 2 7 V01
HCPL-063L SO8 3.3/5 5 90 75 25 40 15000 1000 3750 567*
CATHODE2 3 6 V02 HCPL-063N SO8 5 3 100 100 45 60 15000 1000 3750 567*
ANODE2 4
Shield
5 GND
HCPL-0630 SO8 5 5 100 100 35 40 5000 1000 3750 567*
HCPL-0631 SO8 5 5 100 100 35 40 10000 1000 3750 567*
HCPL-0661 SO8 5 5 100 100 35 40 15000 1000 3750 567*
HCPL-263A 300 mil DIP8 5 3 100 100 45 60 1000 50 3750/5000# 630*
HCPL-263L 300 mil DIP8 3.3/5 5 90 75 25 40 15000 1000 3750/5000# 630*
HCPL-263N 300 mil DIP8 5 3 100 100 45 60 15000 1000 3750/5000# 630*
HCPL-2630 300 mil DIP8 5 5 100 100 35 40 5000 1000 3750/5000# 630*
HCPL-2631 300 mil DIP8 5 5 100 100 35 40 10000 1000 3750/5000# 630*
HCPL-4661 300 mil DIP8 5 5 100 100 35 40 15000 1000 3750/5000# 630*
Notes: * - with IEC/EN/DIN EN 60747-5-2/5 Option 060, # - with UL 5000VRMS/1 minute Option 020, ^ - Advanced information, may subject to changes.
15
Optoisolation and Optical Sensor Products
NC 1 8 VDD
ANODE 2 7 VE
CATHODE 3 6 VO
ACPL-C61L-000E^ Stretched 3.3/5 2.5 10 100 100 40 40 20000 1000 5000 1230*
NC 4 5 GND
SO8
ACNW261L-000E^ 400 mil 3.3/5 2.5 10 100 100 40 40 20000 1000 5000 1414*
HCPL-0708 DIP8
ACPL=071L ACPL-W61L-000E NEW Stretched 3.3/5 1.6 10 80 80 30 30 20000 1000 5000 1140*
5 VDD SO6
ANODE 1
4 VO
CATHODE 2
3 GND
ACPL-M61L-000E NEW SO5 3.3/5 1.6 10 80 80 30 30 20000 1000 3750 567*
ACPL-M75L
ANODE 1
6 VDD
ACPL-M62L-000E^ SO5 3.3/5 1.6 10 80 80 30 30 20000 1000 3750 567*
5 VO
CATHODE 3
4 GND
7 VO1
CA
CATHODE 1 2
CA
CATHODE 2 3
6 VO2
ANODE 2 4 5 GND ACPL-K64L-000E NEW Stretched 3.3/5 1.6 10 80 80 30 30 20000 1000 5000 1140*
SO8
Notes: * - with IEC/EN/DIN EN 60747-5-2 Option 060, # - with UL 5000V RMS /1 minute Option 020, ^ - Advanced Information, may subject to changes.
16
Optoisolation and Optical Sensor Products
Description Benefits
The circuit shows a CMOS interface circuit • Offers low power consumption
for 8 MBd applications. Over the tempera-
ture range a CMOS CD4050 Hex Buffer
can source about 0.7 mA (minimum), which
is sufficient to drive the HCPL-2300 opto-
Applications coupler. The 20 pF capacitor allows peaking
currents to assist the LED in turning on and
• Computer-peripheral off quickly.
interface
• Digital isolation for These optocouplers utilize a simple interface
A/D, D/A conversion requiring low power consumption.
• High speed, long
distance isolated
line receiver Typical CMOS Interface Block Diagram
• Level shifting
• RS 232C interface CD4050 HCPL-2300 CD4050
5V
V 20 pF 8 0.1 V
DD1 1 K� µF DD2
R
L
V 7
IN V
2 6 O
R
I
3
5
1 2
V R R V
DD1 I L DD1
(V) (K � ) (K � ) (V)
5 5.11 1 5
10 13.3 2.37 10
15 19.6 3.16 15
ANODE 2 7 RL
CATHODE 3 6 VD
HCPL-2300 300 mil DIP8 0.5 0.16 0.2 100 50 3750 630*
4 5 GND
17
Optoisolation and Optical Sensor Products
Description Benefits
The circuit shown in the typical TTL interface • Pull up resistor not required at the
block diagram is an interface between two optocoupler output
TTL gates using an active output (totem • Low power on the optocoupler input
pole) optocoupler, the HCPL-2201. A series circuit
Applications switching circuit drives the optocoupler • Wide operating supply voltages
LED. The active output HCPL-2201 can be up to 20V
• Computer-peripheral directly connected to a TTL gate, and no • Built-in Schmitt Triggers for better signal
interface pull-up resistor is required. The HCPL-2201 integrity and accuracy in a noisy network/
• Ground loop can sink enough current to handle up to circuits.
• High speed line receiver 16 LSTTL or 4 TTL loads.
• Microprocessor Typically, the 5 MBd logic gate optocoupler
system interface is used in the Isolated High-Low Gate Drive
• Pulse transformer interface block diagram as shown below.
replacement
Typical TTL Interface Block Diagram Isolated High-Low Gate Drive Interface Block Diagram
HCPL-2219/2200 Output
V (AC-DC)
V R V CC2
CC1 IN CC2 (+5 V) Transformer
(+5 V) DC Output
TTL/ Data
LSTTL Output Power Output
Data TTL/ DC Bus Switch Rectifier
Input LSTTL 0.1 µF
GND
Totem
Pole
Output
Gate
Recommended R IN = 1.1 K � Gate PWM
Driver Controller
Digital Control
Optocoupler Circuit
18
Optoisolation and Optical Sensor Products
CATHODE 3 6 NC
HCPL-2200 300 mil DIP8 1.6 0.3 0.3 1000 50 3750 630*
NC 4 5 GND
Shield
NC 1 8 V CC HCPL-2202 300 mil DIP8 1.6 0.3 0.3 1000 50 3750 630*
ANODE 2 7 NC
CATHODE 3 6 VO
HCPL-2212 300 mil DIP8 1.6 0.3 0.3 10000 1000 3750 630*
NC 4 5 GND
Shield
Dual Channel HCPL-2231 300 mil DIP8 1.8 0.3 0.3 1000 50 3750 –
ANODE 1 1 8 V CC
CATHODE 1 2 7 V O1
CATHODE 2 3 6 V O2 HCPL-2232 300 mil DIP8 1.8 0.3 0.3 10000 1000 3750 –
ANODE 2 4 5 GND
Shield
5 VO
CATHODE 3 4 GND
Shield
ANODE 1 6 VDD
ACPL-W21L ^ Stretched SO6 1.6 0.25 0.25 25000 1000 5000 1140*
NC 2 5 VO
CATHODE 3 4 GND
Shield
Dual Channel ACPL-024L ^ SO8 1.6 0.25 0.25 25000 1000 3750 560 *
ANODE 1 1 8 VDD
CATHODE 1 2 7 V01
CATHODE 2 3 6 V02
ACPL-K24L ^ Stretched SO8 1.6 0.25 0.25 25000 1000 5000 1140*
ANODE 2 4 5 GND
Shield
ANODE 2 7 VO
CATHODE 3 6
NC 4 5 GND
Shield
Notes: * - with IEC/EN/DIN EN 60747-5-2/5 Option 060, ^ - Advanced Information, may subject to changes.
19
Optoisolation and Optical Sensor Products
transformers R IN = 5 - V F V OL
4 5
IF
• Replace slow
phototransistor isolators -15 V
3
4
1 6 ACPL-W50L-000E Stretched SO6 3.3/5 24 3 53 200 3 1.0 1.0 15000 1000 5000 1140*
2 5
3 4
isolation
ANODE
CATHODE
2
3
V
V
7
6
E
• FIA RS-232C
NC line
4 GND receiver 5
CATHODE 2 3 6 O2 560 Ω
39 Ω X 2 7 2.2 kΩ
ANODE 2 4 5 GND
IF
Y 3 6 VO
39 Ω
1 2 3 6 7 8
Y X Y X Y X Y X Y X Y X 4 5
Device
CATHODE 3 6 VO
Part No. Package VDD IF(on) CTR tPLH tPHL CMR - V/μs@VCM VISO VIORM
NC 4
SHIELD
5 GND
V mA μs μs VRMS V
Min. % % IF Max. Max. CMR VCM Min. peak
Min. Max. mA V/μs (Min.) V
ANODE 1 1 VCC
Single Channel 4N45 300 mil DIP6 5 0.5 200 1000 10 500 50 – – 3750 630
8
CATHODE 1 2 7 VO1
CATHODE
ANODE 21 3 66 VV
B
O2 TRUTH TABLE
(POSITIVE LOGIC)
ANODE 2 4 5 GND LED OUTPUT
SHIELD
CATHODE 2 5 VO
ON 4N46 L 300 mil DIP6 5 0.5 200 1000 10 500 50 – – 3750 630
OFF H
3 4 GND
** JEDEC Registration Data
** JEDEC Registered up to 70°C
NC 1 4N45/4N46 8 VCC
6N138 300 mil DIP8 5 0.5 300 2600 1.6 50 15 1000 10 3750/5000# –
ANODE 2 7 VE
6N139 300 mil DIP8 5 0.5 400 5000 0.5 90 2 1000 10 3750/5000 # 630*
CATHODE 3 6 V
NC 4
1
5
8 VCCO
GND
HCNW138 400 mil DIP8 5 0.5 300 – 1.6 70 11 1000 10 5000 1414
ANODE 2 7 VB
CATHODE 3 6 V
O
HCNW139 400 mil DIP8 5 0.5 400 – 0.5 11 11 1000 10 5000 1414
ANODE 1 1
4 5 GND
8 VCC
HCPL-070A SO8 5 0.04 800 25000 0.04 25 60 1000 10 3750 560*
CATHODE 1 2 7 VO1 HCPL-070L SO8 3.3/5 0.5 400 5000 0.5 90 30 1000 10 3750 560*
CATHODE 2 3
ANODE 2 4
6 VO2
HCPL-0700 SO8 5 0.5 300 2600 1.6 50 15 1000 10 3750 560*
5 GND
HCPL-0701 SO8 5 0.5 400 5000 0.5 10 2 1000 10 3750 560*
ANODE 1 6 VCC HCPL-270L 300 mil DIP8 3.3/5 0.5 400 5000 0.5 90 30 1000 10 3750/5000 # 630*
5 V OUT
CATHODE 2 4 GND HCPL-4701 300 mil DIP8 5 0.04 800 25000 0.04 90 25 1000 10 3750/5000# 630*
ANODE 1 6 VCC HCPL-M700 SO5 5 0.5 300 2600 1.6 35 20 1000 10 3750 –
5 V OUT
CA
CATHODE 2 4 GND
HCPL-M701 SO5 5 0.5 400 3500 0.5 10 2 1000 10 3750 –
Dual Channel HCPL-073A SO8 5 0.04 800 25000 0.04 130 25 1000 10 3750 –
ANODE 1 1 8 V CC
HCPL-073L SO8 3.3/5 0.5 400 5000 0.5 90 30 1000 10 3750 560*
CATHODE 1 2 7 V 01 HCPL-0730 SO8 5 0.5 400 5000 0.5 35 20 1000 10 3750 –
CATHODE 2 3 6 V 02
ANODE 2 4 5 GND
HCPL-0731 SO8 5 0.5 400 5000 0.5 35 20 1000 10 3750 –
HCPL-273L 300 mil DIP8 3.3/5 0.5 400 5000 0.5 90 30 1000 10 3750/5000 # 630*
HCPL-2730 300 mil DIP8 5 0.5 400 5000 0.5 35 20 1000 10 3750/5000# –
HCPL-2731 300 mil DIP8 5 0.5 400 5000 0.5 60 20 1000 10 3750/5000# –
HCPL-4731 300 mil DIP8 5 0.04 800 25000 0.04 90 25 1000 10 3750/5000# –
Notes: * - with IEC/EN/DIN EN 60747-5-2/5 Option 060, # - with UL 5000V RMS/1 minute Option 020
21
Optoisolation and Optical Sensor Products
22
Optoisolation and Optical Sensor Products
Cathode
Devices Devices
Ground
Anode
Vout
Vcc
Tx Rx
Current
VCC Sense
Cathode
Ground
Anode
Vout
Vcc
ACPL-M61T/M71T/M72T Controlled Devices, e.g.
UART Air-Compressor,
essor,
essor
Network Lighting Control, Battery
Controller Management System, etc.
CATHODE 3 4 GND
ACPL-M72T SO5 4000 560 -40 to 125 3.0 to 5.5 4 to 15 1.5 100 100 50 60 25 1000
ACPL-K72T^ SSO8 5000 1140 -40 to 125 3.0 to 5.5 4 to 15 1.5 100 100 50 60 25 1000
Dual Channel LED Input ACPL-K74T^ SSO8 5000 1140 -40 to 125 3.0 to 5.5 4 to 15 1.5 35 35 12 15 15 1000
ANODE 1 1 8 VDD 2
CATHODE 1 2 7 VD 1
ACPL-K75T^ SSO8 5000 1140 -40 to 125 3.0 to 5.5 4 to 15 1.5 100 100 50 60 25 1000
CATHODE 2 3 6 VD2
ANODE 2 4 5 GND
ANODE 1 6 V CC ACPL-M61T SO5 4000 560 -40 to 125 4.5 to 5.5 5 to 15 13 100 100 35 40 15 1000
5 VO
CA
CATHODE 3 SHIELD 4 GND
23
Optoisolation and Optical Sensor Products
6
ACPL-M43T SO5 4000 560 -40 to 125 20 5 to 15 20 45 1 1 0.45 0.5 15 1500
1
ACPL-K43T SSO8 5000 1140 -40 to 125 20 0.8 to 15 24 65 1 1 0.45 0.5 15 1500
5
ACPL-M49T SO6 4000 560 -40 to 125 20 4 to 10 20 58 100 100 0.45 0.5 15 1500
4
ACPL-K49T SSO8 5000 1140 -40 to 125 20 4 to 10 24 58 100 100 0.45 0.5 15 1500
Dual Channel ACPL-K44T SSO8 5000 1140 -40 to 125 20 0.8 to 15 20 65 1 1 0.45 0.5 15 1500
ANODE 1 1 8 V CC
CATHODE 1 2 7 V D1
CATHODE 2 3 6 V D2
ANODE 2 4 5 GND
6
ACPL-M43T SO5 4000 560 -40 to 125 20 5 to 15 20 45 32 1000 15 1500
1
5 ACPL-K43T SSO8 5000 1140 -40 to 125 20 0.8 to 15 24 65 32 1000 15 1500
3
4
ACPL-M49T SO5 4000 560 -40 to 125 20 4 to 10 20 45 32 – 15 1500
ACPL-K49T SSO8 5000 1140 -40 to 125 20 4 to 10 24 58 32 – 15 1500
D
UVLO
11 VC
R
V IN+ LED1 I 10 VOUT
Feedback
2 V
E 14
V IN– 3 R DESAT DESTAT
9, 12
V CC1 4
Shield VEE
LED2
RESET 5
16 VE
6
FAULT Fault
GND1
1
Shield
15 VLED2+
VE VCC2 Rail-to-Rail, ACPL- SO16 5000 1230 -40 to 125 15 to 10 to 16 2.5 – 250 250 – – 30 1500
NC
NC
VCC1
VLED+ Desat, 34JT^ 25
UVLO, Fault
UVLO
UVLO Input
FAULT Driver Output DESAT
Feedback,
VEE1 Driver Over
Current
AN VOUT
CA
SS Control
Miller Control
SS/CLAMP
Miller
Clamp
N/C 1 8 VCC
UVLO ACPL- DIP8 3750 630 -40 to 125 15 to 7 to 16 2.5 5 500 500 300 350 15 1500
312T 30
ANODE 2 7 VO
CATHODE 3 6 VO
N/C 4 5 VEE
24
Optoisolation and Optical Sensor Products
GND1 4 5 GND2
Shield
DC Voltage ACPL-C87AT^ SSO8 5000 1140 -40 to 125 4.5 to 0 to 2 1 1 0.35 20 100 15 1000
Sensing, 5.5
VDD1 1 8 VDD2
VIN 2 7 VOP
Shut-down
SD 3 6 VON ACPL- C87BT^ SSO8 5000 1140 -40 to 125 4.5 to 0 to 2 1 0.5 0.35 20 100 15 1000
Control
GND1 4
Shield
5 GND2
5.5
3
4
ANODE 1 6 V CC ACPL-M46U-000E NEW SO5 -40 to 125 NA 10 44 90 0.4 0.6 450.0 NA 15000 1500 3750 567
5 VO
CA
CATHODE 3 SHIELD 4 GND
ANODE 1 6 VCC ACPL-M61U-000E NEW S05 -40 to 125 NA 5 NA NA 0.1 0.1 35 40 15000 1000 3750 567
5 VO
CA
CATHODE 3 4 GND
N/C 1 8 VCC
ACPL-312U-000E NEW DIP6 -40 to 125 2.5 7 N/A N/A 0.5 0.5 300 350 25000 1500 3750 630
ANODE 2 7 VO
(PDD)
CATHODE 3 6 VO
N/C 4 5 VEE
25
Optoisolation and Optical Sensor Products
Digital Isolator
IN1 2 7 VOE
V
NC 3 6 OUT1
GND1 4 5 GND2
HCPL-9000 Single 300 mil DIP8 100 15 18 3 6 15000 1000 2500
V
VDD1 1 8 VDD2
HCPL-0930 Dual SO8 100 15 18 3 6 15000 1000 2500
Galvanic Isolation
IN1 2 7 OUT1
IN2 3 6 OUT2
GND1 4 5 GND2
HCPL-9030 Dual 300 mil DIP8 100 15 18 3 6 15000 1000 2500
V
VDD1 1 8 VDD2
HCPL-0931 Dual, Bi-Dir SO8 100 15 18 3 6 15000 1000 2500
Galvanic Isolation
IN1 2 7 OUT1
OUT 3
OUT2 6 IN2
GND1 4 5 GND2
HCPL-9031 Dual, Bi-Dir 300 mil DIP8 100 15 18 3 6 15000 1000 2500
VDD1 1
GND1 2
16 VDD2
V
15 GND2
ACML-7400 NEW Quad SO16 Wide Body 100 32 36 2 5 25000 1000 5600
IN 1 3 14 OUT1
Galvanic Isolation
IN 3 5 12 OUT3
IN 4 6 11 OUT4
NC 7
GND1 8 9 GND2
V
VDD1 1
GND1 2
16 VDD2
V
15 GND2
ACML-7420 NEW Quad, 2/2, Bi-dir SO16 Wide Body 100 32 36 2 5 25000 1000 5600
IN 1 3 14 OUT1
Galvanic Isolation
HCPL-091J Quad, 2/2 Bi-dir SO16 Narrow Body 100 15 18 3 6 15000 1000 2500
IN 2 4 13 OUT2
OUT3 5 12 IN 3
OUT4 6 11 IN 4
NC 7
HCPL-901J Quad, 2/2 Bi-dir SO16 Wide Body 100 15 18 3 6 15000 1000 2500
10 NC
GND11 8 9 GND2
G
V
VDD1
GND1 2
1 16 VDD2
V
15 GND2
ACML-7410 NEW Quad, 3/1, Bi-dir SO16 Wide Body 100 32 36 2 5 25000 1000 5600
IN 1 3 14 OUT1
Galvanic Isolation
IN 2 4
IN 3 5
13 OUT2
12 OUT3 HCPL-092J Quad, 3/1 Bi-dir SO16 Narrow Body 100 15 18 3 6 15000 1000 2500
OUT 6
OUT4 11 IN4
NC 7 10 NC
GND1 8 9 GND2
HCPL-902J Quad, 3/1 Bi-dir SO16 Wide Body 100 15 18 3 6 15000 1000 2500
26
Optoisolation and Optical Sensor Products
HV–
Current PWM PWM
Sensor
ACPL-C79B/
C79A/C790 DSP
ACPL-M61L,
2X
27
Optoisolation and Optical Sensor Products
VIN+ 2 + 7 VOUT+
+
–
VIN– 3
GND1 4
– 6 VOUT–
5 GND2
ACPL-C780 ±200mV Inputs, SSO8 -40 to +85 ±3 0.0037 100 4.5 - 5.5 15000 1000 5000 1230*
Shield
Differential Outputs
ACPL-C784 ±200mV Inputs, SSO8 -40 to +85 ±5 0.0037 100 4.5 - 5.5 15000 1000 5000 1230*
Differential Outputs
ACPL-C79B NEW ±200mV Inputs, SSO8 -40 to +105 ±0.5 0.05 200 3 - 5.5 15000 1000 5000 1230
Differential Outputs
ACPL-C79A NEW ±200mV Inputs, SSO8 -40 to +105 ±1 0.05 200 3 - 5.5 15000 1000 5000 1230
Differential Outputs
ACPL-C790 NEW ±200mV Inputs, SSO8 -40 to +105 ±3 0.05 200 3 - 5.5 15000 1000 5000 1230
Differential Outputs
ACPL-790B NEW ±200mV Inputs, DIP8 -40 to +105 ±0.5 0.05 200 3 - 5.5 15000 1000 5000 891
Differential Outputs
ACPL-790A NEW ±200mV Inputs, DIP8 -40 to +105 ±1 0.05 200 3 - 5.5 15000 1000 5000 891
Differential Outputs
ACPL-7900 NEW ±200mV Inputs, DIP8 -40 to +105 ±3 0.05 200 3 - 5.5 15000 1000 5000 891
Differential Outputs
HCPL-7800A ±200mV Inputs, DIP8 -40 to +85 ±1 0.0037 100 4.5 - 5.5 15000 1000 3750 891
Differential Outputs
HCPL-7800 ±200mV Inputs, DIP8 -40 to +85 ±3 0.0037 100 4.5 - 5.5 15000 1000 3750 891
Differential Outputs
HCPL-7840 ±200mV Inputs, DIP8 -40 to +85 ±5 0.0037 100 4.5 - 5.5 15000 1000 3750 891*
Differential Outputs
HCPL-788J ±200mV Inputs, SO16 -40 to +85 ±3 0.06 30 4.5 - 5.5 25000 1000 5000 1230
Onboard Fault Detection
VIN+ 1 16 GND2
VIN– 2 15 VDD2
CH 3 14 UL
FAULT
ULT
CL 4 13 ABSV
ABSVAL
VDD1 5 12 VOUT
ACPL-785J ±200mV Inputs, SO16 -40 to +85 ±5 0.06 30 4.5 - 5.5 25000 1000 5000 1230*
VLED+ 6 11 VREF
VDD1 7 10 VDD2
GND1 8 9 GND2
Onboard Fault Detection
VDD1 1
IDD1 IDD2
8 VDD2
HCPL-7510 ±200mV Inputs, DIP8 -40 to +85 ±3 0.06 100 4.5 - 5.5 15000 1000 3750 891*
VIN+ 2 + + 7 VOUT Single-ended Outputs
VIN– 3 – – 6 VREF
GND1 4
Shield
5 GND2
HCPL-7520 ±200mV Inputs, DIP8 -40 to +85 ±5 0.06 100 4.5 - 5.5 15000 1000 3750 891*
Single-ended Outputs
ACPL-C870^ 0-2V High Impedence SSO8 -40 to +105 ±3 0.04 100 3 .3 15000 1000 5000 1230
VDD1 1
VIN 2
8 VDD2
7 VOP
Inputs, Differential Outputs
SD 3
GND1 4
6 VON
5 GND2
ACPL-C87A^ 0-2V High Impedence SSO8 -40 to +105 ±1 0.04 100 3 .3 15000 1000 5000 1230
Inputs, Differential Outputs
Shield
ACPL-C87B^ 0-2V High Impedence SSO8 -40 to +105 ±0.5 0.04 100 3 .3 15000 1000 5000 1230
Inputs, Differential Outputs
Notes: * - with IEC/EN/DIN EN 60747-5-2/5 Option 060, ^ - Advanced Information.
28
Optoisolation and Optical Sensor Products
DD1 1
VIN+ 2
ACPL=796J 16 GND2
15 NC
HCPL-786J Internally Clocked, SO16 -40 to +85 ±2 3 11 4.5 - 5.5 20000 1000 5000 1230
VIN– 3
NC 4
Sigma-
Delta
14 VDD2
13 MCLK
10MHz
Decoder
NC 5 Mod./ 12 NC
Encoder
NC 6 11 MDAT
NC 7 10 NC
GND1 8 9 GND2
Isolation Boundary ACPL-C797 NEW Internally Clocked, SSO8 -40 to +105 ±1 3 12 3 - 5.5 25000 1000 5000 1230
VDD1 1 8 VDD2 10MHz
VIN+ 2 Sigma- 7 MCLK
ACPL-7970 NEW Internally Clocked, DIP8 -40 to +105 ±1 3 12 3 - 5.5 25000 1000 5000 891
Delta Decode
Mod./
VIN– 3 Encoder 6 MDAT
HCPL-7860 Internally Clocked, DIP8 -40 to +85 ±1 (Matching) 3 11 4.5 - 5.5 20000 1000 3750 891
10MHz
HCPL-7560 Internally Clocked, DIP8 -40 to +85 ±5 64 8 4.5 - 5.5 20000 1000 3750 891*
10MHz
CCLK 1
CLAT 2
Config
Interface
16 VDD
15 CHAN
HCPL-0872 Modulator Clock SO16 -40 to +85 Dual, Programmable Digital Filter 4.5 - 5.5¨ NA NA NA NA
CDAT 3
MCLK1 4
Conversion
Interface 14 SCLK
13 SDAT
Input, Programmable with SPI Interface
Conversion Modes
CH1
MDAT1 5 12 CS
MCLK2 6 Threshold 11 THR1
CH1 Detect and
MDAT2 7 10 OVR1
Reset
GND 8 9 RESET
Notes: * - with IEC/EN/DIN EN 60747-5-2/5 Option 060, ^ - Advanced Information, may subject to changes, ¨ - VDD
29
Optoisolation and Optical Sensor Products
Voltage Sensor
ACPL-C79B/C79A/C790
Gate Drive
ACPL-332J
R Gate Drive
ACPL-332J M
S Voltage
T Sensor
Current
Sensor, 3X
Current Sensor
ACPL-C79B/C79A/C790
Micro Controller
30
Optoisolation and Optical Sensor Products
ANODE 2 9 VOUT
CATHODE 3 8 NC
NC 4 7 VEE
NC 5 6 NC
N/C 1 8 VCC
ACNW3410-000E^NEW 400 mil DIP 7 2.0 2.5 <0.50 <0.50 <0.35 30 40000 1500 5000 1414
ANODE 2 7 VOUT
CATHODE 3 6 N/C
N/C 4 5 VEE
ANODE
ACPL-P343-000E NEW Stretched SO6 7 3.0 4.0 0.20 0.20 0.1 30 35000 1500 3750 891*
1 6 VCC
N/C 2 5 VOUT
ACPL-W343-000E NEW Stretched SO6 7 3.0 4.0 0.20 0.20 0.1 30 35000 1500 5000 1140*
ACPL-P341-000E NEW Stretched SO6 7 2.5 3.0 0.20 0.20 0.1 30 35000 1500 3750 891*
CATHODE 4 4 VEE
ACPL-W341-000E NEW Stretched SO6 7 2.5 3.0 0.20 0.20 0.1 30 35000 1500 5000 1140*
ACPL-P340-000E NEW Stretched SO6 7 0.8 1.0 0.20 0.20 0.1 30 35000 1500 3750 891*
ACPL-W340-000E NEW Stretched SO6 7 0.8 1.0 0.20 0.20 0.1 30 35000 1500 5000 1140*
ANODE 1 8 VCC
ACPL-H342-000E NEW Stretched SO8 7 2.0 2.5 0.35 0.25 -0.2 30 40000 1500 3750 891*
NC 2 7 VOUT
CATHODE 3
V CLAMP
6 VCLAMP
ACPL-K342-000E NEW Stretched SO8 7 2.0 2.5 0.35 0.25 -0.2 30 40000 1500 5000 1140*
NC 4 5 VEE
N/C 1 8 VCC ACPL-312U-000E NEW 300 mil DIP 7 2.0 2.5 0.5 0.5 0.35 30 25000 1500 3750 630
ANODE 2 7 VO
CATHODE 3 6 VO
N/C 4 5 VEE
13
ACPL-330J-000E NEW SO16 8 1.0 1.5 0.25 0.25 0.15 30 50000 1500 5000 1230
VCC2
UVLO
6, 7
ANODE
ACPL-331J-000E
11
Driver
5, 8 VOUT
– 1.5A Highly Integrated Gate Drive Optocoupler with Active Miller Clamp, Over-Current Protection and Fault Feedback
CATHODE
LED1 DESAT
14
DESAT
9, 12
VCLAMP
2 10
– Automatic Fault Reset after fixed delay time (for ACPL-330J-000E only)
VCC1
VCLAMP
LED2
3 VE
FAULT 16
ACPL-332J-000E SO16 8 2.0 2.5 0.25 0.25 0.15 30 50000 1500 5000 1230
1, 4 15
NEW
VS
Shield VLED
ACPL-333J-000E
– 2.5A Highly Integrated Gate Drive Optocoupler with Active Miller Clamp, Over-Current Protection and Fault Feedback
– Under Voltage Lock-Out Protection (UVLO) with Hysteresis
– Automatic Fault Reset after fixed delay time (for ACPL-333J-000E only).
1 8 ACPL-H312-000E Stretched SO8 7 2.0 2.5 0.5 0.5 0.35 30 15000 1500 3750 891*
2 7
3 6
ACPL-K312-000E Stretched SO8 7 2.0 2.5 0.5 0.5 0.35 30 15000 1500 5000 1140*
4 5
ANODE 1 6 VCC ACPL-P302-000E Stretched SO6 7 0.2 0.4 0.7 0.7 0.5 30 10000 1000 3750 891*
N.C. 2 5 VO
CATHODE 3 4 VEE
ACPL-P314-000E Stretched SO6 8 0.4 0.6 0.7 0.7 0.5 30 25000 1000 3750 891*
SHIELD
ACPL-W302-000E Stretched SO6 7 0.2 0.4 0.7 0.7 0.5 30 10000 1000 5000 1140*
ACPL-W314-000E Stretched SO6 8 0.4 0.6 0.7 0.7 0.5 30 25000 1000 5000 1140*
N/C 1 8 VCC ACNW3190-000E 400 mil DIP8 10 4.0 5.0 0.5 0.5 0.3 30 15000 1500 5000 1414
ANODE 2 7 VO
CATHODE 3 6 VEE
N/C 4 5 VEE
SHIELD
31
Optoisolation and Optical Sensor Products
ANODE 2 7 N/C ACPL-3130-000E 300 mil DIP8 7 2.0 2.5 0.5 0.5 0.35 30 40000 1500 3750 630*
CATHODE 3 6 VO
ACPL-J313-000E 300 mil DIP8 7 2.0 2.5 0.5 0.5 0.35 30 40000 1500 3750 1230^
N/C 4 5 VEE
Shield
ACPL-T350-000E 300 mil DIP8 7 2.0 2.5 0.5 0.5 0.35 30 15000 1500 3750 630*
HCNW3120 400 mil DIP8 10 2.0 2.5 0.5 0.5 0.3 30 25000 1500 5000 1414
HCPL-J312 300 mil DIP8 7 2.0 2.5 0.5 0.5 0.35 30 25000 1500 3750 1230^
HCPL-J314 300 mil DIP8 8 0.4 0.6 0.7 0.7 0.5 30 25000 1500 3750 891
HCPL-T250 300 mil DIP8 7 0.5 1.5 0.5 0.5 – 30 5000 600 3750 630*
HCPL-T251 300 mil DIP8 8 0.1 0.4 1.0 1.0 – 30 10000 600 3750 –
HCPL-0302 SO8 7 0.2 0.4 0.7 0.7 0.5 30 10000 1000 3750 566*
HCPL-0314 SO8 8 0.4 0.6 0.7 0.7 0.5 30 25000 1000 3750 566*
HCPL-3020 300 mil DIP8 7 0.2 0.4 0.7 0.7 0.5 30 10000 1000 3750 630*
HCPL-3120 300 mil DIP8 7 2.0 2.5 0.5 0.5 0.35 30 25000 1500 3750 630*
HCPL-3140 300 mil DIP8 8 0.4 0.6 0.7 0.7 0.5 30 25000 1000 3750 630*
HCPL-3150 300 mil DIP8 7 0.5 0.6 0.5 0.5 0.35 30 15000 1500 3750 630*
HCPL-3180 300 mil DIP8 10 2.0 2.5 0.2 0.2 0.09 20 10000 1500 3750 630*
HCPL-316J SO16 – 2.0 2.5 0.5 0.5 0.3 30 15000 1500 5000 1230
VIN+ 1 16 VE
VIN– 2 15 VLED2+
VCC1 3 14 DESAT
GND1 4 13 VCC2
RESET
FAULT
5
6
12
11
VC
VOUT
– 2.0 A Highly Integrated Gate Drive Optocoupler with over-current Protection and Fault Feedback
VLED1+ 7 10 VEE – CMOS compatible
VLED1– 8 9 VEE
– Under Voltage Lock-Out Protection (UVLO) with Hysteresis
Dual Channel HCPL-314J SO16 8 0.4 0.6 0.7 0.7 0.5 30 25000 1500 5000 1230
N/C 1 16 VCC
ANODE 2 15 VO
CATHODE 3 14 VEE
Shield
ANODE 6 11 VCC
HCPL-315J SO16 7 0.5 0.6 0.5 0.5 0.35 30 15000 1500 5000 1230
CATHODE 7 10 VO
N/C 8 9 VEE
Shield
Notes: * - with IEC/EN/DIN EN 60747-5-2/5 Option 060, ^ - Advanced Information, may subject to changes.
32
Optoisolation and Optical Sensor Products
RIN 1 10
20KΩ
IF
74LS05 2 9
VIN
IO IL
3 8
VOL VOUT
5 - VF
RIN =
IF 4 7
Shield IO (min) = IF • CTR (min)
HV+
VCC
Current Sense
IN_UH
U
MCU and PWM Generator
ACPL-M484/P484/W484, OR
V
ACPL-M483/P483/W483 U V W M
For Phases U, V and W
W
IN_UL
GND
VCC +–
33
Optoisolation and Optical Sensor Products
2
6
5
ACPL-P483-000E NEW Stretched SO6 4 – – – 0.12 0.12 0.10 30000 1000 3750 891*
3
Shield
4
ACPL-W483-000E NEW Stretched SO6 4 – – – 0.12 0.12 0.10 30000 1000 5000 1140*
1 6 ACPL-M484-000E NEW SO5 4 – – – 0.12 0.15 0.13 30000 1000 3750 567*
2 5
3
Shield
4 ACPL-P484-000E NEW Stretched SO6 4 – – – 0.12 0.15 0.13 30000 1000 3750 891*
ACPL-W484-000E NEW Stretched SO6 4 – – – 0.12 0.15 0.13 30000 1000 5000 1140*
1
20Ω
10
ACNV4506-000E NEW 500 mil DIP10 10 44 – 10 0.55 0.40 0.50 30000 1500 7500 2262*
2 9
3 8
4 7
Shield
5 6
NC 1 8 V
ACPL-4800-000E 300 mil DIP8 6 – – – 0.35 0.35 0.25 30000 1000 3750 630*
CC
Anode 2 7 NC
Cathode 3 6 VO
NC 4 5 GND
Shield
1
6 ACPL-M43U-000E SO5 10 32 80 10 1 1 0.9 15000 1000 3750 567*
5
3
4
ANODE 1 6 V CC
ACPL-M46U-000E SO5 10 44 90 10 0.4 0.55 0.45 15000 1000 3750 567*
5 VO
CA
CATHODE 3 SHIELD 4 GND
ANODE 1 6 VCC ACPL-P456-000E Stretched SO6 10 44 >90 10 0.55 0.45 0.45 15000 1500 3750 891*
NC 2 5 VO
CATHODE 3
Shield
4 GND ACPL-W456-000E Stretched SO6 10 44 >90 10 0.55 0.45 0.45 15000 1500 5000 1140*
ANODE 1 6 VCC ACPL-P480-000E Stretched SO6 6 – – – 0.35 0.35 0.25 20000 1000 3750 891*
NC 2 5 VO
3
Shield
4 GND ACPL-W480-000E Stretched SO6 6 – – – 0.35 0.35 0.25 20000 1000 5000 1140
ANODE 1 6 VCC ACPL-P481-000E Stretched SO6 6 – – – 0.35 0.35 0.25 20000 1000 3750 891*
NC 2 5 VO
CATHODE 3
Shield
4 GND ACPL-W481-000E Stretched SO6 6 – – – 0.35 0.35 0.25 20000 1000 5000 1140*
NC 1 8 VCC
ACPL-K453-000E Stretched SO8 16 19 50 16 1.00 1.00 1.00 15000 1500 5000 1140*
ANODE 2 7 NC
CA
CATHODE 3 6 VO
NC 4 5 GND
Shield
ANODE 1 6 VCC
ACPL-P454-000E Stretched SO6 12 26 65 12 1.14 1.00 1.30 15000 1500 3750 891*
NC 2 5 VO
CATHODE 3 4 GND
ACPL-W454-000E Stretched SO6 12 26 65 12 1.14 1.00 1.30 15000 1500 5000 1140*
Shield
Notes: * - with IEC/EN/DIN EN 60747-5-2/5 Option 060, # - with UL 5000VRMS/1 minute Option 020, ^ - Advanced information, may subject to changes.
34
Optoisolation and Optical Sensor Products
ANODE 2 7 NC
HCNW4503 400 mil DIP8 16 19 50 16 1.0 1.0 – 15000 1500 5000 1414
CA
CATHODE 3 6 VO HCNW4504 400 mil DIP8 12 25 65 12 1.4 1.0 1.3 15000 1500 5000 1414
4 5 GND
HCPL-0452 SO8 16 19 50 16 1.0 1.0 – 1000 10 3750 560*
HCPL-0453 SO8 16 19 50 16 1.0 1.0 1.0 15000 1500 3750 560*
HCPL-0454 SO8 12 26 65 12 1.4 1.0 – 15000 1500 3750 560*
HCPL-4502 300 mil DIP8 16 19 50 16 1.0 1.0 – 1000 10 3750/5000# 630*
HCPL-4503 300 mil DIP8 16 19 50 16 1.0 1.0 1.0 15000 1500 3750/5000# 630*
HCPL-4504 300 mil DIP8 12 26 65 12 1.4 1.0 1.3 15000 1500 3750/5000# 630*
HCPL-J454 300 mil DIP8 12 21 65 12 0.7 0.5 1.3 15000 1500 3750 891
NC 1 20 k W
8 V CC HCNW4506 400 mil DIP8 10 44 >90 10 0.55 0.40 – 15000 1500 5000 1414
ANODE 2 7 VL HCPL-0466 SO8 10 44 >90 10 0.55 0.48 0.45 15000 1500 3750 560*
CA
CATHODE 3 6 VO
NC 4 SHIELD
5 GND HCPL-4506 300 mil DIP8 10 44 >90 10 0.55 0.40 0.45 15000 1500 3750/5000# 630*
HCPL-J456 300 mil DIP8 10 44 >90 10 0.55 0.40 0.45 15000 1500 3750 891
ANODE 1 6 V
CC
HCPL-M452 SO5 16 20 50 16 1.0 1.0 – 1000 10 3750 567*
5 VO HCPL-M453 SO5 16 20 50 16 1.0 1.0 1.0 15000 1500 3750 567*
CA
CATHODE 3
Shield
4 GND
HCPL-M454 SO5 12 26 65 12 1.4 1.0 1.3 15000 1500 3750 560*
ANODE 1 6 V CC HCPL-M456 SO5 10 44 >90 10 0.55 0.40 0.45 15000 1500 3750 560*
5 VO
CA
CATHODE 3 SHIELD 4 GND
Dual Channel HCPL-0534 SO8 16 19 50 16 1.0 1.0 – 15000 1500 3750 560*
ANODE 1 1 8 V CC
V 01
HCPL-4534 300 mil DIP8 16 19 50 16 1.0 1.0 – 15000 1500 3750/5000# 630*
CA
CATHODE 1 2 7
CA
CATHODE 2 3 6 V 02
ANODE 2 4 5 GND
Notes: * - with IEC/EN/DIN EN 60747-5-2/5 Option 060, # - with UL 5000VRMS/1 minute Option 020, ^ - Advanced information, may subject to changes.
35
Optoisolation and Optical Sensor Products
Description Benefits
The HCPL-2602/12 have input current • Line termination included – no extra
regulators and integrated high gain photo circuitry required
detectors. The input regulator serves as a
line terminator for line receiver applications.
Applications The higher LED threshold voltage provides
improved immunity to differential noise and
• Isolated line receiver the rejection internally shielded detector
• Computer-peripheral provides better common-mode rejection
interface with no sacrifice in speed.
• Microprocessor system The diagram below illustrates an unbalanced
interface line receiver using the integrated voltage-
• Digital isolation for a/d, clamp input optocoupler, HCPL-2602.
d/a conversion TTL data is converted to a differentia
• Current sensing lsignal viathe differential line driver, and
• Instrument Input/Output transmitted over twisted-pair wire. The
isolation Schottky diode helps to improve the turn-
• Ground loop elimination on and turn-off delays.
• Pulse transformer
replacement
• Power transistor isolation Typical Block Diagram
in motor drives
+5V HABT-5400
1/2 9614 16 1 V CC – 8
1 +5V
l R
5 2
2 7 390 W
6 4 .01
.0
mF
VN 7 3 VO
3 6
BELDEN 8777 15 pF
8 GND
4 5
HCPL-2602/12
IN+ 2 7 VE
HCPL-2612 300 mil DIP8 50 100 100 3500 300 3750
IN– 3 6 VO
CATHODE 4
Shield
5 GND 40 ns max propagation delay skew (part to part)
Line termination circuitry included
36
Optoisolation and Optical Sensor Products
I+ 3 6 VI
I- 4 5 GND
Receiver HCPL-4200 300 mil DIP8 20 (1400) 1.6 1.0 1000 50 3750
I+ 1 8 VCC
CMOS compatible data input for HCPL-4200
I- 2 7 VO
NC 3 6 VE
NC 4 5 GND
37
Optoisolation and Optical Sensor Products
2 DC+ 7 RL
AC Up to
1140 VPEAK
3 DC- VO 6 VOUT HCPL-0370/3700/3760 SCHEMATIC
RX /2 DC + INPUT VCC
4 AC GND 5
2 I CC 8
D1D2
AC Input Configuration 1
AC IO VO
INPUT D3D4
VCC 6
HCPL-0370/3700/3760 4
1 AC V CC 8 3 5
RX /2 DC – INPUT GND
2 DC+ 7 RL
DC Up to
1140 V PEAK RX /2
3 DC- VO 6 V OUT
4 AC GND 5
DC Input Configuration
1 NC 8
Isolation LED
Barrier 2 NC 7
K1 K2
3 6
4 PD1 PD2 5
Device Part No. Package Transfer Gain DC Non-Linearity CTR VISO VIORM
% % VRMS V
Max. Max. % % Min. peak
Min. Max.
HCNR200 400 mil DIP8 +/-15 0.25 0.25 0.75 5000 1414*
LED Cathode 1 LED 8 NC
LED Anode 2
K1 K2
7 NC HCNR201 400 mil DIP8 +/-5 0.05 0.36 0.72 5000 1414*
PD1 Cathode 3 6 PD2 Cathode
PD1 Anode 4 PD1 PD2 5 PD2 Anode -65 ppm/°C gain temperature coefficient
1.5 MHz bandwidth
Notes: * - with IEC/EN/DIN EN 60747-5-2/5 Option 050
39
Optoisolation and Optical Sensor Products
1N4150 500 � 2
D1 R4 = Potentiometer
+51 W Resistor R7
51 � 15 K� R10 GV = VOUT/VIN
100� Q1 – Q4 = 2N3904
1 2 2
ANODE 2 7
HCPL-4562 300 mil DIP8 17 0.25 45 122 3750/5000# 630*
CATHODE 3 6
40
Optoisolation and Optical Sensor Products
Control Circuit
Programmable Logic Controller I/O Units
Error Amplifier
& Comparator I/O Module
General Purpose
Output
Phototransistor
Optocoupler
PLC/PC
Controller
Logic Input
Circuit
41
Optoisolation and Optical Sensor Products
CA
CATHODE 2 3 EMITTER HCPL-181-000E# SO4 50 50 600 5 5 0.2 20 1 4/3 80 1.4 20 3750 1
HCPL-817-000E* 300 mil DIP4 50 50 600 5 5 0.2 20 1 4/3 70 1.4 20 5000 1/2/3
Single Channel-6 pin 4N25-000E 300 mil DIP6 80 20 – 10 10 0.5 50 2 3/3 30 1.5 10 2500 1/2/3
ANODE 1 6 BASE
4N35-000E 300 mil DIP6 60 100 – 10 10 0.3 50 2 3/3 30 1.5 10 3550 1/2/3
CA
CATHODE 2 5 COLLECTOR CNY17-1-000E 300 mil DIP6 60 40 80 10 5 0.3 10 2.5 5/5 70 1.7 60 5000 1/2/3
3 4 EMITTER
CNY17-2-000E 300 mil DIP6 60 63 125 10 5 0.3 10 2.5 5/5 70 1.7 60 5000 1/2/3
CNY17-3-000E 300 mil DIP6 60 100 200 10 5 0.3 10 2.5 5/5 70 1.7 60 5000 1/2/3
CNY17-4-000E 300 mil DIP6 60 160 320 10 5 0.3 10 2.5 5/5 70 1.7 60 5000 1/2/3
Dual Channel-8 pin ACPL-227-500EЖ SO8 50 50 600 5 5 0.4 8 2.4 2/3 80 1.3 20 3000 1
8 7 6 5 (Half pitch)
ACPL-827-000E @ 300 mil DIP8 50 50 600 5 5 0.2 20 1 4/3 70 1.4 20 5000 1/2/3
1 2 3 4
• PinChannel-16
Quad 1, 3 Anode
pin ACPL-247-000E SO16 50 50 600 5 5 0.4 8 2.4 2/3 80 1.3 20 3000 1
16• 15Pin142, 413 12 Cathode
11 10 9 (Half pitch)
• Pin 5, 7 Emitter
• Pin 6, 8 Collector ACPL-847-000E 300 mil 50 50 600 5 5 0.2 20 1 4/3 70 1.4 20 5000 1/2/3
1 2 3 4 5 6 7 8
DIP16
• Pin 1, 3, 5, 7 Anode
• Pin 2, 4, 6, 8 Cathode
• Pin 9,11,13,15 Emitter
Device Part No. Package Absolute CTR VCE(sat) tr/tf BVCEO VF VISO Note
Max. IF μs V VRMS
mA % % IF VCE V IF IC typ Min. V IF Min.
Min. Max. mA V Max. mA mA Max. mA
Single Channel-4 pin ACPL-214-500Eζ SO4 +/-50 20 400 ±5 5 0.4 ±8 2.4 2/3 80 1.4 ±20 3000 1
(Half pitch)
ANODE
CA
CATHODE 1 4 COLLECTOR
HCPL-354-000E SO4 +/-50 20 400 ±1 5 0.2 ±20 1 4/3 35 1.4 ±20 3750 1
ANODE 2 3 EMITTER
CA
CATHODE
HCPL-354-00AE SO4 +/-50 50 150 ±1 5 0.2 ±20 1 4/3 35 1.4 ±20 3750 1
HCPL-814-000E 300 mil DIP4 +/-50 20 300 ±1 5 0.2 ±20 1 4/3 35 1.4 ±20 5000 1/2/3
HCPL-814-00AE 300 mil DIP4 +/-50 50 150 ±1 5 0.2 ±20 1 4/3 35 1.4 ±20 5000 1/2/3
Dual Channel-8 pin ACPL-224-500E SO8 +/-50 20 400 ±1 5 0.4 ±8 2.4 2/3 80 1.4 ±20 3000 1
8 7 6 5 (Half pitch)
ACPL-824-000E 300 mil DIP8 +/-50 20 300 ±1 5 0.2 ±20 1 4/3 70 1.4 ±20 5000 1/2/3
1 2 3 4
Quad Channel-16 pin ACPL-244-500E SO16 +/-50 20 400 ±1 5 0.4 ±8 2.4 2/3 80 1.4 ±20 3000 1
16 15 14 13 12 11 10 9 (Half pitch)
ACPL-844-000E 300 mil +/-50 20 300 ±1 5 0.2 ±20 1 4/3 70 1.4 ±20 5000 1/2/3
1 2 3 4 5 6 7 8 DIP16
Notes: 1 - IEC/EN/DIN EN 60747-5-2/5 Option 060 available, 2 - 0.4” Lead Spacing Option W00 available, 3 - Gull Wing SMD option available
* CTR rank with Option 000E, 00AE, 00BE, 00CE, 00DE and 00LE available, # - CTR rank with option 000E, 00AE, 00BE, 00CE and 00DE available
@ CTR rank with Option 000E, 00BE and 00CE available
§ CTR rank with option 500E, 50AE, 50BE, 50CE and 50DE available,
Ж CTR rank with option 500E, 50BE, 50CE
ζ - CTR rank with option 500E and 50AE available.
42
Optoisolation and Optical Sensor Products
Description Benefits
Avago Technologies’ new ASSR Series are • Superior to traditional electromechanical
high-speed optically isolated MOSFET- relays (EMR)
output solid-state relays that feature per- – Lower power consumption
formance that has been qualified over
a wide industrial temperature range of – Faster switching speed with high
Applications -40°C to +85°C. They are Form A (normally transient immunity
open) single-pole single-throw relays in – Smaller size
• Telecommunications
industry-standard 6-pin and 8-pin dual-in- – Much better reliability
switching
line (DIP) packages, and 4-pin small outline
• Data communications (SO) packages. Their output ratings range • High reinforced insulation in miniature
from 60V to 600V maximum load voltage SO-4 package
• Industrial control
and from 40mA to 2.5A continuous output • Qualified performance over
• Medical system - 40°C to +85°C
current. Their transient immunity of more
• Security system than 1kV/µs and excellent noise rejection • Expanding portfolio to address diversified
• Automatic test equipment between input-output as well as between market
open terminals on the output will eliminate
• Data acquisition system – Low R(oN ) for less insertion loss
undesirable transient effects. Reinforced
• Measuring instruments insulation of 3.75kV with fast switching – Low c(OFF) for better isolation
• EMR/reed relay speed makes them suitable for a wide range performance
replacement of industrial, consumer and automotive – High current capability with low R(oN)
applications.
Compared to electromechanical relays, the General Purpose
ASSR Series offer distinct advantages, in- The ASSR-14xx, ASSR-32xx and ASSR-41xx
cluding the elimination of contact bounce, are designed for a wide variety of indus-
and problems due to shock, vibration, or trial and consumer electronics applica-
mounting position. They have no wear out tions which includes telecommunications
mechanism limiting the number of op- switching, data communications, automatic
erations, and require no minimum contact metering, medical system, security system,
“wetting” current. They are also free from battery monitor, digital home appliances,
magnetic fields, do not generate electrical set top boxes, etc.
noise, and are not sensitive to electromag-
netic interference.
ASSR-1218
Sensor / Detector
ASSR-xx20
Controller / Processor
(Motion, Smoke, Light, etc.)
Drive Circuit
Sensor / Detector
Receiver / Alarm
43
Optoisolation and Optical Sensor Products
Transducer B
Output
Transducer C
Controller / Processor
Digital Logic Controller
ASSR-x01C
ASSR-xx10
Transducer N
Application Block Diagram
Input
Instrumentation
Amplifier
(Differential Input)
ACPL-214 ASSR-x02C
44
Optoisolation and Optical Sensor Products
Device Part No. Function Package Channel VISO VO(OFF) IO IO(OFF) C(OFF) R(ON) TON TOFF
& Output kV V A nA pF Ω ms ms
Type Min. Min. Max. Max. Max. Max. Max. Max.
Opto-isolation
ASSR-1218-003E STD SO4 1 Form A 3.75 60 0.2 1000 – 10 5.0 5.0
1 4 ASSR-1410-003E GP SO4 1 Form A 3.75 60 0.6 100 – 1 0.5 0.2
ASSR-1510-003E HC SO4 1 Form A 3.75 60 1.0 100 – 0.5 1 0.2
Turnoff
Circuit
ASSR-301C-003E Low CxR SO4 1 Form A 3.75 250 0.05 10 15 50 0.5 0.2
2 3
ASSR-1611-001E HC 300mil DIP6 1 Form A 3.75 60 2.5 100 – 0.1 3.0 0.5
3 4
ASSR-302C-002E Low CxR 300mil DIP8 2 Form A 3.75 250 0.05 10 15 50 0.5 0.2
Turn-off
Circuit
4 5
ASSR-322R-002E Low CxR 300mil DIP8 2 Form A 3.75 250 0.2 1 60 8.5 0.5 0.2
ASSR-3220-002E GP 300mil DIP8 2 Form A 3.75 250 0.2 100 – 10 1 0.2
ASSR-402C-002E Low CxR 300mil DIP8 2 Form A 3.75 400 0.04 10 15 100 0.5 0.2
ASSR-4120-002E GP 300mil DIP8 2 Form A 3.75 400 0.12 100 – 25 0.5 0.2
ASSR-4128-002E STD 300mil DIP8 2 Form A 3.75 400 0.1 1000 – 35 3.0 1.0
Note: GP = General Purpose, Low CxR = Low C(OFF) x R(ON), HC = High Current, STD = Standard
1 8
ASSR-V621-002E GP 300mil DIP8 2 Form A 6.5 15 3750
Turn-off
Circuit
2 7
3 6
Turn-off
Circuit
4 5
Opto-isolation
1 8
ASSR-V622-002E GP 300mil DIP8 2 Form A 6.5 15 3750
Turn-off
Circuit
2 7
3 6
Turn-off
Circuit
4 5
45
Optoisolation and Optical Sensor Products
Description Benefits
The HCPL-0810 / 8100 and ACPL-0820 • Compact integrated solution
are designed for narrow band powerline • Low power consumption
communication (PLC) analog front end • Integrated safety features such as over-
interfacing applications. Compact in size, temperature shutdown
Applications suitable for FCC Part 15 and EN50065-1
• Suitable for FCC Part 15 and EN50065-1
compliant design, this family can interface compliant design
• Automatic meter reading many common PLM transceivers to the
(AMR) powerline, thus simplifying the powerline
• Powerline modem modem (PLM) implementations.
• Home automation/control
• Security and surveillance Typical Power Line Modem Using ACPL-0820
• General purpose isolated
transceiver 5V
R3
• Internet appliances
1 8 L
STATUS Status Vdd 5V
R1 2 7
TXp In1 Out1
Filter Vin R2 3 6 Vout
TXn In2 Out2
4 5
TX-EN Tx-enGnd N
Gain of Amp1 = - R3/R1, Gain of Amp2 = - R4/R2, R1=R2, R3=R4, Overall Differential Output V out = (R3/R1) . V in
46
Optoisolation and Optical Sensor Products
47
Optoisolation and Optical Sensor Products
48
Optoisolation and Optical Sensor Products
VCC
*DLAANODE
SMD number doesVE not include extensions for lead form and finish
CATHODE VOUT
Single- Commercial Class H DLA Class K DLA Package No. of Typical Current Input With- Supply
VCC
Channel
+li
VE1 Part SMD SMD Chan- Data Transfer Current stand Voltage
Base 1
Schematic
VO1
VE2 Number Class H * Class K * 8 16 16 20 nels Rate Ratio Test
-
+li
VO2
GROUND
pin pin pin pad Voltage
Base 2
DIP DIP FP LCCC
4N55 4N55/883B 5962-8767901 HCPL-257K 5962-8767905K • 2 700 KBd 9% min 12-20 mA 1500 Vdc 18V
VCC
ANODE VB HCPL-5500 HCPL-5501 5962-9085401H HCPL-550K 5962-9085401K • 1 700 KBd 9% min 12-20 mA 1500 Vdc 18V
CATHODE VOUT
GROUND
HCPL-5530 HCPL-5531 5962-8767902 HCPL-553K 5962-8767906K • 2 700 KBd 9% min 12-20 mA 1500 Vdc 18V
HCPL-6530 HCPL-6531 5962-8767903 HCPL-653K 5962-8767907K • 2 700 KBd 9% min 12-20 mA 1500 Vdc 18V
HCPL-6550 HCPL-6551 5962-8767904 HCPL-655K 5962-8767908K • 4 700 KBd 9% min 12-20 mA 1500 Vdc 18V
*DLA SMD number doesVCCnot include extensions for lead form and finish
ANODE
CATHODE VOUT
GROUND
Vdd1 Vdd2
Vin+ Vout+
Vin- Vout-
Ground 1 GROUND 2
IO +
IF +
VF-
VCC
ANODE
49CATHODE
GROUND
1 N/C 8 VCC
CATHODE VO
GROUND
ANODE VE
CATHODE VOUT
GROUND
-
+li VCC
VE1
Base 1 VO1
VE2
- VO2
+li
GROUND
AC Input 4
+liD3
ANODE
-
D4
I V E2
VEO VO6
O2
GROUND
ACPL-5700L ACPL-5701L 5962-0822701H ACPL-570KL 5962-0822701K • 1 100 KBd 300% min 0.5-5 mA 1500 Vdc 3.3V
CATHODE
Base 2 VO
DC– Input 3
GROUND
GROUND 5
ACPL-5730L ACPL-5731L 5962-0822702H ACPL-573KL 5962-0822702K • 2 100 KBd 300% min 0.5-5 mA 1500 Vdc 3.3V
*DLA SMD number does
VCC not include extensions for lead form and finish
Vdd1ANODE VVdd2
B
VCC
Vin+
CATHODE VVout+
OUT
ANODE VE
Vin- GROUND
Vout-
CATHODE VOUT
Ground 1 GROUND 2
Hermetically Sealed AC/DC to Logic Interface Optocouplers
GROUND
VCC
Single - ANODE
+li VCCIO + Commercial Class H DLA Class K DLA 8 pin No. Typical Input Output Withstand
VVOUT
Channel Part SMD SMD DIP of Data Threshold Current Test
CATHODE E1
IF +
Base 1 VO1
GROUND
VE2
VF- -
Schematic
+li
Base 2
VO2
GROUND Number Class H * Class K * Channels Rate Current Voltage
DC+ Input 2 VCC8
HCPL-5760 HCPL-5761 5962-8947701 HCPL-576K 5962-8947702K • 1 100 KHz 2.5 mA TH+ 2.6 mA 1500 Vdc
D1 D2 ICC
VCC
1 VCC
ANODE VIOB VO6
ANODE D3 D4
ACCATHODE
Input 4 VOUT
CATHODE
DC– Input 3 GROUND 5
GROUND
GROUND
*DLA SMD
Vdd1
number does
Vdd2
not include extensions for lead form and finish
Vin+ Vout+
Vin- VCCVout-
ANODE1
Ground
1 N/C 8 GROUND
VCC 2
CATHODE VOUT
ANODE 2 7 N/C
GROUND
Single
DC+ Input 2VF-
D1 D2 ICC
VCC8
Commercial Class H DLA Class E DLA Package No. Output Output Maximum Maximum Input Input/
Channel1
D3 D4
IO VO6 Part SMD SMD 8 pin of Withstand On- Load Off-State Current Output
Schematic
AC Input 4
DC– Input 3 GROUND 5 Number Class H * Class E * DIP Channels Voltage Resistance Current Leakage Insulation
VCC
ANODE
CATHODE
HSSR-7110 HSSR- 5962- HSSR-711E 5962- • 1 90 V 1.0 Ohm 0.8 A ac 10 µA 10-20mA 1500 Vdc
Vdd1 Vdd2
Vin+
GROUND
Vout+ 7111 9314001H 9314001E 1.6 A dc
Vin- Vout-
Ground 1 GROUND 2 HSSR- 5962- • 1 90 V 1.0 Ohm 0.8 A ac 10 µA 5-20mA 1500 Vdc
1 N/C 8 VCC
7112 9314002H 1.6 A dc
ANODE 2 7 N/C
*DLACATHODE
SMD3 number does
IO +
6 VO
not include extensions for lead form and finish
IF +
VF- N/C 4 5 VEE
Shield
VCC
ANODE
CATHODE
GROUND
1 N/C 8 VCC
ANODE 2 7 N/C
CATHODE 3 6 VO
N/C 4 5 VEE
Shield
50
VCC
ANODE VB
VCC
CATHODE VOUT
ANODE VVCCE
GROUND
CATHODE
ANODE VOUT
VE
CATHODE GROUND
VO
VCC
-
ANODE
+li V
VCC VCC
CATHODE
Base 1 VOUT VE1
ANODE VE O1
GROUNDVE2
-
CATHODE
+li VO VO2
GROUND
Base 2 GROUND
Vdd1 Vdd2
Single
Vin+
-
Vout+ Commercial Class H DLA Class E DLA Package No. Gain Non- Prop CMR Bandwidth Offset
V
Channel+li
Vin-
BaseANODE
Vout-CCVCC
VE1
VO12
Part SMD SMD 8 pin of Tolerance Linearity Delay V/µs Khz mV
Ground 11 GROUND
Schematic
CATHODE
-
VOUTVE2
VO2
Number Class H * Class E * DIP Channels (Max. %) (Max. %) µs (Max.) (Min.) (typ.) (typ.)
+li GROUND
GROUND
IO +
IF + 9755701E
DC+ Input
VF- 2 VVCCCC8
ICC
ANODED1 D2 VB
1
CATHODE IO VVOUT
O6
D3 D4
AC Input 4 GROUND
DC– Input 3 GROUND 5
*DLAANODE
SMD number does
VCC
not include extensions for lead form and finish
CATHODE
Vdd1 Vdd2
VCC
GROUND
Vin+ Vout+
ANODE
Vin- Vout-
1 N/C 8 VCC
Single
ANODE 2 7 N/C
IO + Commercial Class H DLA Class K DLA Package No. Typical Current Input Common Withstand
Channel
DC+ Input 2 3
CATHODEIF +
VF- 4
D1 D2
6 VO VCC8
ICC Part SMD SMD 8 pin of Data Transfer Current Mode @ Test
N/C 5 VEE
Schematic 1 Shield
D3 D4
IO VO6 Number Class H * Class K * DIP Channels Rate Ratio VCM=1000V Voltage
AC Input 4
DC– Input 3 GROUND 5
HCPL-5300 HCPL-5301 5962-9685201H HCPL-530K 5962-9685201K • 1 2MBd 30 % Min. 10-20 mA 10kV/µs 1500 Vdc
VCC
ANODE
Vdd1 Vdd2
CATHODE
Vin+ Vout+
Vin- GROUND
Vout-
Ground 1 GROUND 2
*DLA SMD number does not include extensions for lead form and finish
1 N/C 8 VCC
IO +
ANODE 2 7 N/C
IF +
CATHODE
VF- 3 6 VO
N/C 4 5 VEE
VCC
Single
ANODE Commercial Class H DLA Class K DLA Package No. Peak UVLO+ UVLO- Input Common Withstand
Channel
CATHODE
GROUND
Part SMD SMD 8 pin of Output Current Mode @ Test
Schematic Number Class H * Class K * DIP Channels Current VCM=1000V Voltage
HCPL-5120 HCPL-5121 5962-0420401H • 1 2.0 A 13.5V 9.5V 10-18 10kV/µs 1500 Vdc
ANODE 2
1 N/C 8 VCC
7 N/C
Max. Min. mA
CATHODE 3
N/C 4
6 VO
5 VEE
HCPL-5150 HCPL-5151 5962-0420501H • 1 0.5 A 13.5V 9.5V 10-18 10kVµs 1500 Vdc
Shield
Max. Min. mA
*DLA SMD number does not include extensions for lead form and finish
51
Optoisolation and Optical Sensor Products
6.807 ± 0.127
(0.268 ± 0.005)
6.807 ± 0.127
(0.268 ± 0.005) 1.91
1.905 (0.075) (0.075)
5 6 7 8 0.64 ± 0.025
0.64 ± 0.025 4 5 6
1.590 ± 0.127
(0.063 ± 0.005)
7° 1.590 ± 0.127
45°
0.450 (0.063 ± 0.005)
7° 45°
(0.018)
3.180 ± 0.127 0.450
(0.125 ± 0.005) (0.018)
3.180 ± 0.127
(0.125 ± 0.005)
ACPL-Hxxx ACPL-Pxxx
– Stretched SO8 – Stretched SO6
– 7mm Clearance – 7mm Clearance
– 8mm Creepage – 8mm Creepage
10.7
4 3 2 1 (.421) 10.7
(.421)
3 2 1
0.64 ± 0.025
0.64 ± 0.025
5 6 7 8
7.620 7.620
(0.300) 4 5 6 (0.300)
1.590 ± 0.127
(0.063 ± 0.005)
7°
45°
0.450 7° 45°
(0.018)
3.180 ± 0.127 0.450
(0.125 ± 0.005) (0.018)
3.180 ± 0.127
(0.125 ± 0.005)
52
Optoisolation and Optical Sensor Products
0.5 ± 0.1 Remarks: The notation ‘#’ is used for existing products, while (new) products launched
(0.02)
2.54 ± 0.25 (0.1) Dimensions in millimeters and (inches)
since 15th July 01 will use ‘-’
300 mil 8 pin DIP 300 mil 8 pin DIP Gullwing Option 300 SMD
UL
1 2 3 4 Recognition 1 2 3 4
53
Optoisolation and Optical Sensor Products
300 mil 8 pin DIP (white) 300 mil 8 pin DIP (white) Gullwing Option 300 SMD
Pad Location (for reference only)
9.80 0.25 7.62 0.25 9.80 0.25
(0.386 0.010) (0.300 0.010) (0.380 0.010)
1.016 (0.040)
8 7 6 5 8 7 6 5
Type Number 6.35 0.25
Option Code (0.250 0.010)
XXXXZ Date Code Typ.
6.350 0.25
(0.250 0.010)
YYWW RU
10.9 (0.430)
UL 1 2 3 4
1 2 3 4 Recognition
1.080 0.320 0.65 (0.025) Min. Dimensions in millimeters and (inches). 2.54
(0.043 0.013) "L" = Option 020 (0.100) 0.635 0.25
2.54 0.25 "V" = Option 060 BSC (0.025 0.010)
(0.100 0.010) Option numbers 300 and 500 not marked. Dimensions in millimeters (inches). 12 Nom.
0.635 0.130
Lead coplanarity = 0.10 mm (0.004 inches) (0.025 0.005)
400 mil 8 pin DIP 400 mil 8 pin DIP Gull Wing Option 300 SMD
1 2 3 4 1 2 3 4
1.3 0.9
(0.051) (0.035)
1.55 10.16 (0.400) 1.55
(0.061) Typ. (0.061)
Max. Max. 12.30 0.30
7 Typ. + 0.076 (0.484 0.012)
0.254 - 0.0051
11.00 Max.
5.10 + 0.003) (0.433)
(0.201) Max. (0.010 - 0.002) 4.00 Max.
(0.158)
54
Optoisolation and Optical Sensor Products
SO5 SMD
PAD LOCATION (for reference only)
4.4 0.3
(0.17) (0.01)
3.6 0.1
(0.142 0.004)
0.102 0.102
MXXX ANODE 1 6 VCC 2.5 0.1 (0.004 0.004) 1.3
7.0 0.2 (0.098 0.004) (0.05)
4.4 0.1 XXX
(0.173 0.004) (0.276 0.008) 2.5
5 VOUT 0.15 0.025 (0.10)
(0.006 0.001)
1.27 BSG
CATHODE 3 4 GND (0.050)
0.71 Min.
(0.028) 0.9 0.5
0.4 0.05 (0.04) (0.02)
7.2
(0.016 0.002) (0.28)
Dimensions in millimeters (inches)
Dimensions in millimeters (inches)
8 7 6 5
5.994 ± 0.203 0.189 (4.80)
(0.236 ± 0.008) 0.197 (5.00)
XXX
3.937 ± 0.127
Thermal
YWW Type Number 7.49 (0.295) 7.49 (0.295)
Pad
(0.155 ± 0.005) (Last 3 DIigits) 8 7 6 5
Date Code
1 2 3 4 1.9 (0.075) 1.9 (0.075)
Pin One 0.228 (5.80) 0.150 (3.80)
0.244 (6.20) 0.157 (4.00)
0.406 ± 0.076 0.64 (0.025)
(0.016 ± 0.003) 1.270 BSG 0.64 (0.025)
(0.050)
1 2 3 4
*5.080 ± 0.127 7∞ 0.432
(0.200 ± 0.005) 45∞ X 0.013 (0.33)
(0.017) 0.020 (0.51)
0.010 (0.25) 0.008 (0.19)
3.175 ± 0.127 0.020 (0.50) 0.010 (0.25)
0 ~ 7∞ 0.004 (0.10) x 45°
(0.125 ± 0.005) 0.228 ± 0.025 0.010 (0.25)
1.524 0.054 (1.37)
(0.060) (0.009 ± 0.001) 0.069 (1.75)
0°
8°
*Total package length (inclusive of mold flash) 0.040 (1.016) 0.016 (0.40)
0.203 ± 0.102 0.060 (1.524) 0.050 (1.27)
5.207 ± 0.254 (0.205 ± 0.010) (0.008 ± 0.004)
Dimensions in millimeters (inches).
0.305 Min.
Lead coplanarity = 0.10 mm (0.004 inches) max. Dimensions: inches (millimeters) MIn
(0.012) Max
SO16 SMD (Include ACML series Digital Isolator) SO16 SMD (ACSL-6300/6310/6400/6410/6420)
0.018 0.050
(0.457) (1.270) 0.386 (9.802)
0.394 (9.999)
16 15 14 13 12 11 10 9
0.345 ± 0.010 8 1
All leads
T Number
Type (8.986 ± 0.254) to be coplanar
Date Code ± 0.002
0.228 (5.791)
0.152 (3.861)
316J 0.244 (6.197)
0.295 ± 0.010 0.157 (3.988)
YYWW
(7.493 ± 0.254)
0–8∞ 0.008 ± 0.003
0.025 Min. (0.203 ± 0.076)
Standoff
0.408 ± 0.010 0.013 (0.330)
(10.160 ± 0.254)
0.020 (0.508)
1 2 3 4 5 6 7 8 0.054 (1.372) 0.010 (0.245)
x 45 ß
0.406 ± 0.10 0.068 (1.727) 0.008 (0.191) 0.020 (0.508)
(10.312 ± 0.254) Land Pattern Recommendation 0.010 (0.249)
0.040 (1.016)
0.016 (0.406)
0.060 (1.524) 0.004 (0.102)
0.050 (1.270)
0.010 (0.249)
0.458 (11.63)
0.138 ± 0.005
0.018
(3.505 ± 0.127) Min
(0.457) Dimensions: Inches (millimeters)
Max
0.085 (2.16)
0.025 (0.64)
55
Optoisolation and Optical Sensor Products
7 6 5
0.047 (1.194)
0.190 Typ.
(4.826)
0.240 (6.100)
0.240 (6.096) 0.260 (6.600) 0.370 (9.398)
0.260 (6.604)
300 mil 8 pin DIP 300 mil 8 pin Gull Wing Option 300 SMD
0.370 (9.400)1 2
Pad Location (for reference only)
3 4
0.040 (1.016)
0.390 (9.906)
0.228 (5.791)
0.152 (3.861)
0.228 (5.80) 0.150 (3.80) 0.244 (6.197)
0.157 (3.988)
0.244 (6.20) 0.157 (4.00)
0.013 (0.330)
0.020 (0.508)
0.054 (1.372) 0.010 (0.245)
0.189 (4.80) 0.068 (1.727) 0.008 (0.191) x 45 ß
0.020 (0.508)
1 2 3 4 0.013 (0.330) 0.010 (0.249)
0.197 (5.00) 0.020 (0.508)
0.050 (1.270) 0.054 (1.372) 0.010 (0.245)
0 ° – 8 Typ
0.013 (0.33) x 45 ß
0.189 (4.80) 0.060 (1.524) 0.068 (1.727) 0.008 (0.191) 0.020 (0.508)
0.020 8(0.51) 7 6 5
0.010 (0.249)
0.197 (5.00)
0.040 (1.016)
0.050 (1.270) 0.004 (0.102) 0.016 (0.406)
0 ° – 8 Typ
0.060 (1.524)
0.228 (5.80) 0.150 (3.80) 0.010 (0.25) 0.060 (1.524) 0.050 (1.270)
8 7 6 5 0.010 (0.249)
0.244 (6.20) 0.157 (4.00) 0.020 (0.50) 0.008 (0.19) 0.040 (1.016)
x 45 0.010 (0.25) 0.004 (0.102) 0.016 (0.406)
0.060 (1.524)
0.228 (5.80) 0.150 (3.80) 0.010 (0.249) 0.050 (1.270)
0.004 (0.10) Min
0.2440.054
(6.20)(1.37) 0.157 (4.00) Dimensions: Inches (millimeters)
1 2 3 4 0.010 (0.25) Max
0.069 (1.75)
0
0.013 (0.33) 8 Dimensions: Inches (millimeters) Min
0.040
10.020(1.016)
2 3 4 Max
(0.51) 0.016 (0.40)
0.060 (1.524)
0.050 (1.27)
0.013 (0.33)
0.020 (0.51) Min 0.010 (0.25)
Dimensions: Inches (millimeters)
Max 0.020 (0.50)
x 45
0.008 (0.19)
0.010 (0.25)
Widebody SOIC 16 pin
0.010 (0.25)
0.004 (0.10)
0.054 (1.37) 0.020 (0.50) 0.008 (0.19)
0.010 (0.25) 0.397 (10.084)
0.069 (1.75) x 45 0.010 (0.25) 0.413 (10.490)
0 Pin 1 indent
0.004 (0.10)
8 8 1
0.054 (1.37) 0.010 (0.25) 0.397 (10.084)
0.040 (1.016)
0.069 (1.75) 0.016 (0.40) 0.413 (10.490)
0.060 (1.524) 0 Pin 1 indent
0.050 (1.27)
8 0.394 (10.007) 8 1
0.040 (1.016) Min 0.419 (10.643)
Dimensions: Inches (millimeters) 0.016 (0.40) 0.291 (7.391)
0.060 (1.524) Max
Options Available 0.050 (1.27)
0.394 (10.007)
0.419 (10.643)
0.299 (7.595)
0.016
0.375 0.41
2.540 0.100
(0.015) 0.41
(0.10) 2.54
(0.016)
0.369 ± 0.008 0.008 0.079 ± 0.008
4.3 ± 0.2 2.0 ± 0.2 9.4 ± 0.2
(0.169 ± 0.008) 0.20 2 ± 0.2
(0.079 ± 0.009)
0.46
0.20 (0.018)
(0.008)
0.004 ± 0.004 0.018
0.5 0.102 ± 0.102 0.5 Dimensions in millimeters and (inches). 0.020 0.102 ± 0.102 0.46
Dimensions in millimeters and (inches). (0.02) 0.51
(0.004 ± 0.004) (0.02)
Option number 500 and UL recognition not marked
6-Pin DIP Package with Gull Wing Surface Mount Option 300
300DIP
6-Pin milPackage
6 pin DIP 300 mil 6 pin DIP Gull Wing Surface Mount Option 300
7.62 ± 0.25 Land Pattern Recommendation
9.40 (0.370)
9.90 (0.390) (0.300 ± 0.010)
9.65 ± 0.25
(0.380 ± 0.010)
6 5 4 6.35 ± 0.25
Type Number (0.250 ± 0.010)
Date Code
Lead Free A XXXX UL 6.35 ± 0.25
10.9 (0.430)
Recognition (0.250 ± 0.010)
YYWW RU
Pin One Dot 1 2 3
2.0 (0.080)
1.78 (0.070) Max. 1.27 (0.050)
8-Pin DIP Package with Gull Wing Surface Mount Option 300
300 milPackage
8-Pin DIP 8 pin DIP 300 mil 8 pin DIP Gull Wing Surface Mount Option 300
9.65 ± 0.25 7.62 ± 0.25 Land Pattern Recommendation
(0.380 ± 0.010) (0.300 ± 0.010) 9.65 ± 0.25
1.016 (0.040)
(0.380 ± 0.010)
Type Number 8 7 6 5 6.35 ± 0.25
Option Code* (0.250 ± 0.010)
8 7 6 5
UL
1 2 3 4
1 2 3 4 Recognition
57
Optoisolation and Optical Sensor Products
300 mil 4 pin DIP 400 mil 4 pin 0.4” Lead Spacing Option
300 mil 4 pin Lead Bend Option 300 SMD 300 mil 6 pin DIP
400 mil 6 pin 0.4” Lead Spacing Option 300 mil 6 pin Lead Bend Option 300 SMD
7.62 0.3
7.62 0.3 6 5 4 (0.3)
6 5 4 (0.3)
0.35 0.15/-0.10
(0.14)
58
Optoisolation and Optical Sensor Products
• A217V
YYWWA
Date Code Pin One Dot
4.40 ± 0.20
1 2 7.00 +0.2 (0.173 ± 0.008)
Rank Mark -0.7
.75
(0.030)
3.60 ± 0.3 VDE Option Only
W00E = 0.4” Lead Spacing Option (0.005 ± 0.004) 7.00 ± 0.20 (0.008 ± 0.002)
(0.028 ± 0.008)
Remarks: The notation ‘#’ is used for existing products, while (new) products
launched since 15th July 01 will use ‘-’. SO8 SMD (half-pitch)
1.27 ±0.25
0.050 ±0.010
LEAD FREE VDE option only
0.173 ±0.008
4.40 ±0.20
(0.381 ± 0.020) (0.30 ± 0.01) LEAD FREE YYWWA VDE option only
DATE CODE
0.030
8 7 6 5
0.75
YYWW 0.75
6.50 ± 0.50 YYWWA
0.030
Pin One Dot (0.256 ± 0.020)
0.030
0.75
5.20 ±0.30
5.30 ±0.3
0.008 ±0.002
0.20 ±0.05
0.205 ±0.012
0.005 ±0.004
0.208 ±0.012
0.12 ±0.10
1 2 3 4 RANK
0.75
0.079 ±0.008
2.00 ±0.20
0.030
5.20 ±0.30
5.30 ±0.3
0.008 ±0.002
0.20 ±0.05
0.205 ±0.012
0.005 ±0.004
0.208 ±0.012
0.12 ±0.10
0.016 ±0.004
3.50 ± 0.50 7.00 ±0.40
(0.138 ± 0.020) 0.276 ±0.016
0.7 ±0.2
0.40 ±0.10 0.028 ±0.008
0.50 (0.02) Typ 0.016 ±0.004
2.80 ± 0.50 7.00 ±0.40
3.30 ± 0.10
(0.11 ± 0.02) 0.276 ±0.016
(0.130 ± 0.020)
1.27 ±0.25
0.50 ± 0.10 LEAD FREE 0.050 ±0.010 VDE option only
300 mil(0.102.5416
± 0.25pin DIP
(0.02 ± 0.00) SO16 SMD (half-pitch)
DATE CODE
± 0.01) Dimensions in millimeters and (inches).
1.27 ±0.25
19.84 ± 0.50 7.62 ± 0.30 LEAD FREE 0.050 ±0.010 A244V
0.173 ±0.008
(0.30 – 0.39)
Date Code
A 847 A244V
0.173 ±0.008
4.40 ±0.20
1 2 3 4 5 6 7 8 5.30 ±0.3
10.28 ±0.30 0.208 ±0.012
0.75 0.405 ±0.012
0.030 RANK
0.005 ±0.004
0.12 ±0.10
0.079 ±0.008
2.00 ±0.20
0.26 (0.01)
5.30 ±0.3
10.28 ±0.30 0.208 ±0.012
0.405 ±0.012
3.50 ± 0.50 0.7 ±0.2
0.008 ±0.002
0.005 ±0.004
0.016 ±0.004
2.00 ±0.20
7.00 ±0.40
0.50 (0.02) Typ 0.276 ±0.016
2.80 ± 0.50
(0.11 ± 0.02) 3.30 ± 0.50
(0.130 ± 0.020) 0.7 ±0.2
0.008 ±0.002
59
Optoisolation and Optical Sensor Products
0.46 (0.018)
0.64 (0.025) 0.51 (0.020)
0.36 (0.014) (20 plcs) Typ
0.89 (0.035)
9.02 (0.355)
Option 100, Surface Mount Butt Joint, available on 8 and 16 pin DIP’s
0.69 (0.027)
5.23 (0.206) max 8.76 (0.345)
4.32 (0.170)
Note: Dimensions in millimeters (inches). 0.51 (0.020) max
min
1.14 (0.045)
1.40 (0.055)
16 pin DIP Through Hole (2 or 4 Channel) 2.29 (0.090)
2.79 (0.110)
0.51 (0.020)
max
20.06 (0.790)
0.89 (0.035) 20.83 (0.820)
1.65 (0.065) 8.13 (0.320) 4.32 (0.170)
max
0.51 (0.020) max
min
4.45 (0.175) 1.14 (0.045)
max 0.20 (0.008)
1.40 (0.055) 0.33 (0.013)
2.29 (0.090)
2.79 (0.110) 0.51 (0.020)
0.51 (0.020) 0.20 (0.008) 7.36 (0.290)
3.81 (0.150) max
min 7.87 (0.310)
min 0.33 (0.013)
0.51 (0.020)
max 7.36 (0.290) Note: Dimensions in millimeters (inches)
2.29 (0.090) 7.87 (0.310)
2.79 (0.110)
1.40 (0.055)
2.29 (0.090) 1.65 (0.065)
0.51 (0.020) max
2.79 (0.110)
7.36 (0.290)
7.87 (0.310)
Option 600, Surface Mount Short Butt Joint,
0.51 (0.020) max available on 8 and 16 pin DIP’s
Note: Dimensions in millimeters (inches).
0.51 (0.020) min 3.81 (0.150) max 0.51 (0.020) min 3.81 (0.150) max
0.20 (0.008)
0.33 (0.013)
7.36 (0.290) 1.02 (0.040) Typ.
2.29 (0.090) 1.14 (0.045) 7.87 (0.310) 2.29 (0.090)
2.79 (0.110) 1.25 (0.049)
2.79 (0.110)
60
Optoisolation and Optical Sensor Products
2, 6, 16,
Board CPU 8, 16 1, 6, 16 3, 4, 5, 11, 16, 17, (18) 6, 16, (18)
(18)
6, 7, 16,
FFT/Data Logger 17
(18)
Power Distribution System 9, 16 16, 20 8, 16 3, 4, 5, 12, 16, 17, (18) 13, 16 16, 21 17
Process Meter 7, 8, (18) 1, 6, (18) 12, 17, (18) 6, (18) 2, 6, (18) 13 14, 15 21
10, 14,
Servo Driver 9, 16 16, 20 7, 8, 16 6, 16 3, 4, 5, 11, 16, 17, (18) 6, 16, (18) 13, 16 10, 16 17
15, 16
10, 14,
Switching Power Supply 9, 16 16, 20 17 10, 16 17
15, 16
Test & Measurement Equipment 7, 8, (18) 1, 6, (18) 3, 4, 5, 11, 17, (18) 6, (18) 13 21
Thermo Counter/Recorder 8, 16 6, 16 3, 4, 5, 11, 16, 17, (18) 6, 16, (18) 2, 6,16, (18)
Defibrillator 9
Esophagus Photoplethysmography
Medical 6, 7 (18) 6, 7 (18) 10
(PPG)
1. 3.3V Digital Optocoupler Family 6. 10 MBd Logic Gate Optocoupler 12. I solated 20 mA Current Loop Transmitter/Receiver 18. D igital Isolator
2. 1 MBd Transistor Output Optocoupler 7. 20 MBd Logic Gate Optocoupler 13. AC/DC to Logic Interface 19. Powerline Communication Interface
3. 100 kBd Darlington Transistor Output Optocoupler 8. High Speed Digital CMOS Logic Gate Optocoupler 14. H igh Linearity Analog Optocoupler 20. I ntelligent Power Module
4. 5 MBd Logic Gate Optocoupler 9. Integrated Gate Drive Optocoupler 15. Wideband Analog/Video Optocoupler Interface Optocoupler
5. 8 MBd Logic Gate Optocoupler 10. M iniature Analog Isolation Amplifier 16. H ermetic High Performance Optocoupler 21. S olid State Relay (Photo MOSFET)
11. I solated Line Receiver 17. G eneral Purpose Phototransistor Optocoupler 22. A utomotive Optocoupler
61
Optoisolation and Optical Sensor Products
Heater 9, 22 2, 6, 22
Air Conditioning 9 20 17 10 21 17
Fitness Equipment 9 20 13 10 10 17
Plasma Displays 2, 6, 8, 9, 17
Refrigerator 9 20 17 21 17
Washing Machines 9 20 17 21 17
ISDN 1,2,3 7, 8, 17 13 21 17
Military/ 16 16 16 16 16 16 16 16 16 16 16 16 16
Aerospace/Harsh
Industrial
Note: Number in bracket ( ) indicates non-optical isolation product
1. 3.3V Digital Optocoupler Family 6. 10 MBd Logic Gate Optocoupler 12. Isolated 20 mA Current Loop Transmitter/Receiver 18. Digital Isolator
2. 1 MBd Transistor Output Optocoupler 7. 20 MBd Logic Gate Optocoupler 13. AC/DC to Logic Interface 19. Powerline Communication Interface
3. 100 kBd Darlington Transistor Output Optocoupler 8. High Speed Digital CMOS Logic Gate Optocoupler 14. High Linearity Analog Optocoupler 20. I ntelligent Power Module
4. 5 MBd Logic Gate Optocoupler 9. Integrated Gate Drive Optocoupler 15. Wideband Analog/Video Optocoupler Interface Optocoupler
5. 8 MBd Logic Gate Optocoupler 10. Miniature Analog Isolation Amplifier 16. Hermetic High Performance Optocoupler 21. S olid State Relay (Photo MOSFET)
11. Isolated Line Receiver 17. General Purpose Phototransistor Optocoupler 22. A utomotive Optocoupler
62
Optoisolation and Optical Sensor Products
Optical Sensors
63
Your Imagination. Our Innovation
For product information and a complete list of distributors, please For technical support please email a Technical Response Center in
go to our web site: your region:
www.avagotech.com United States: support@avagotech.com
www.avagotech.com/optocouplers Europe: info@promotionteam.de
www.avagotech.com/hermetic-optocouplers
Asia Pacific: pacrim.components@avagotech.com
www.avagotech.com/sensors
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2012 Avago Technologies
AV00-0254EN 06/15/2012