Professional Documents
Culture Documents
Chapter 2: Standard Codes & Loads: Zamil Steel Buildings Design Manual
Chapter 2: Standard Codes & Loads: Zamil Steel Buildings Design Manual
DESIGN MANUAL
PEB DIVISION 2. Standard codes & loads
• The standard design codes that govern the design procedures and calculations pertaining to built-
up sections are as follows:
• The standard procedures for the design of cold-formed sections are based on following code:
3) AISI: American Iron and Steel Institute, Cold Formed Steel Design Manual, 1986 Edition and
1989 addendum.
• For the standard design loads and design practice the design engineer has to refer to the MBMA
manual which is exclusively used for low rise metal buildings.
4) MBMA: Metal Buildings Manufacturers Association, Low Rise Building Systems Manual
1996. The earlier version is of 1986 with 1990 supplement.
The above codes are to be used for the design of buildings by Zamil Steel design engineers unless
otherwise specified in the Contract Information Form (C.I.F).
DM 03.10.00 2-1