Professional Documents
Culture Documents
Noida - Chauganpur Anganbadi
Noida - Chauganpur Anganbadi
Noida - Chauganpur Anganbadi
1 Excavation of soil in soft and hard soil and getting our the
surplus soil our of anganwadi area Cum 4
2 PCC 1:4:8 in foundation of brick work/drain and ramp filled
mass concrete including ramming and consolidation Cum 0.87
3 Brick work with sub class 'B' brick having curshing strength
75 Kg/ sqcm in boundry wall /ramp and drain Cum 5.38
4 Dismentling of old plaster work and removing debries out of
Sqm 15
premises
5 Plaster work in CM 1:6 . 12mm thick Sqm 52.44
6 Provding and laying of 50mm thick PCC in coping over
Cum 0.18
boudnry wall/drain
7 PCC 1:4:8 in sub base of floor to recived tiles etc, 75mm
Sqm 57.72
thick 4.329
8 Providing and laying 75 mm thick factory made cement
concrete interlocking paver block of M -30 grade made by
block making machine with strong vibratory compaction, of
approved size, design & shape, laid in required colour and
pattern over and including 50mm thick compacted bed of
Sqm 57.72
coarse sand, filling the joints with fine sand etc. all complete
as per the direction of Engineer-in-charge.
11
Painting with one coat of synthetic enamel paint of
approved brand and manufacture to required colour to give Sqm 11.5
an even shade over wood/steel surface
12 Prepatation of old /new plastered surface and applying two
Sqm 110
caots of appex painting over one caot of primer
13 Provding and laying of RCC 1:1 1/2 :3 in kitchen slab Cum 0.2
14 Provding TMT Reinforcement 10mm dia and over in slab Kg 30
15 Shuttering and formwork for mass concrete. Suspended
Sqm 2.4
floors, roofs, landings, balconies and access platform.
16 Steel work welded in built up sections/ framed work
including cutting, hoisting, fixing in position and applying a
priming coat of approved steel primer using structural steel
etc. as required. In gratings, frames, guard bar, ladder, Kg 85.95
railings, brackets,
gates,window grill etc. and similar works.
1
S.N. DESCRIPTION UNIT QTY Rate Amount
2
CHAUGANPUR
DSR 2018
No. QNTY UNIT
DESCRIPTION Rates as / Amount
DSR 2018
ANTI TERMITE TREATMENT
2.35 Diluting and injecting chemical emulsion for POST-
CONSTRUCTIONAL anti-termite treatment (excluding the cost of
chemical emulsion .
2.35.3 Treatment of soil under existing floors using chemical emulsion @
one liter per hole, 300 mm apart including drilling 12 mm diameter
holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse
sand) to match the existing floor :
2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration (will
be supplyed by departmentally) 37 SQM 227.07 8401.59
15.56 Dismantling old plaster at any position or skirting raking out joints
and cleaning the surface for plaster including disposal of rubbish
to the dumping ground within 50 metres lead 120 Sqm 39 4680
Cement Concrete
4.1 Providing and laying in position cement concrete of specified
grade excluding the cost of centering and shuttering - All work up
to plinth level :
4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone
aggregate 40 mm nominal size) 4.02 Cum 5789.6 23291.56
Page 1 of 5
DSR 2018
No. QNTY UNIT
DESCRIPTION Rates as / Amount
DSR 2018
4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1
cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20
mm nominal size) over 75mm thick bed of dry brick ballast 40 mm
nominal size, well rammed and consolidated and grouted with fine
sand, including necessary excavation, levelling & dressing &
finishing the top smooth (Addition concret for making 75mm
making average plinth protection to be added to r.c.c items ,
Reinforcement to be added to steel items)
STEEL REINFORCEMENT
Steel reinforcement for R.C.C. work including straightening,
cutting, bending, placing in position and binding all complete
5.22.6 & Thermo-Mechanically Treated bars of grade Fe-500D or more.
5.22A.6 10 Kg 83.5 835.00
Plaster
CEMENT PLASTER (IN FINE SAND)
13.1 12 mm cement plaster of mix :
13.1.2 1:6 (1 cement: 6 fine sand) 35.00 Sqm 254.25 8898.75
13.2 15 mm cement plaster on the rough side of single or half brick wall
of mix :
13.2.1 1:4 (1 cement: 4 fine sand) 40 Sqm 307.9 12316.00
Waterproofing
22.22A Providing and applying fibre reinforced elastomeric liquid water
proofing membrane with resilient acrylic polymers having Sun
Reflectivity Index (SRI) of 105 on top of concrete roof in three
coats @10.76 litre/ 10 sqm. One coat of self-priming of
elastomeric waterproofing liquid (dilution with water in the ratio of
3:1) and two coats of undiluted elastomeric waterproofing liquid
(dry film thickness of complete application/system not less than
500 microns). The operation shall be carried out after scrapping
and properly cleaning the surface to remove loose particles with
wire brushes, complete in all respect as per the direction of
Engineer-in-Charge
37.2 sqm 415.65 15462.18
11.26 Kota stone slab flooring over 20 mm (average) thick base laid
over and jointed with grey cement slurry mixed with pigment to
match the shade of the slab, including rubbing and polishing
complete with base of cement mortar 1 : 4 (1 cement : 4 coarse
sand)
11.26.1 25 mm thick 38.28 Sqm 1531.85 58639.22
11.27 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and
pillars laid on 12 mm (average) thick cement mortar 1:3 (1
cement: 3 coarse sand) and jointed with grey cement slurry mixed
with pigment to match the shade of the slabs, including rubbing
and polishing complete.
3 Sqm 1810.05 5430.15
Steel Work
10.29 Providing & fixing fly proof wire gauze to windows, clerestory
windows & doors with M.S. Flat 15x3 mm and nuts & bolts
complete.
10.29.1 Galvanised M.S. Wire gauze with 0.63 mm dia wire and
1.4 mm aperture on both sides 4 sqm 709.3 2837.20
PAINT WORK
13.80 Providing and applying white cement based putty of average
thickness 1 mm, of approved brand and manufacturer, over the
plastered wall surface to prepare the surface even and smooth
complete. 150 sqm 80 12000.00
Page 2 of 5
DSR 2018
No. QNTY UNIT
DESCRIPTION Rates as / Amount
DSR 2018
13.47 Finishing walls with Premium Acrylic Smooth exterior paint with
Silicone additives of required shade:
13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm
over and including priming coat of exterior primer applied
@ 2.20 kg/10 sqm) 101 sqm 125 12625.00
Plumbing Work
ELECTRICAL WORK
1.8 Wiring for light point/ fan point/ exhaust fan point/ call bell
point with 1.5 sq.mm FRLS PVC insulated copper conductor
single core cable in surface / recessed medium class PVC
conduit, with piano type switch, phenolic laminated sheet,
suitable size M.S. box and earthing the point with 1.5 sq.mm.
FRLS PVC insulated copper conductor single core cable etc. as
required.
1.14 Wiring for circuit/ submain wiring alongwith earth wire with the
following sizes of FRLS PVC insulated copper conductor, single
core cable in surface/ recessed medium class PVC conduit as
required.
Page 3 of 5