Professional Documents
Culture Documents
First To Light Lab
First To Light Lab
ELECTRICAL CIRCUITS 1
LAB
First to Light Lab
GROUP 8
MENDOZA, MARK JUSTINE
NATIVIDAD, JEFFREY
YALUNG, AARON JOHN
Electrical Circuits 1 (Laboratory) Activity 2
A complete lab write‐up includes a Title, a Purpose, a Data section, and a Conclusion. The Data section
should include a diagram of the 2‐ or the 3‐bulb circuit and some clearly documented observations. The
observations should be pertinent to the Purpose. The Conclusion should (as always) answer the question
posed in the Purpose of the lab.
Procedure:
The team arrange a circuit with two or three bulbs.
They then turned off the lights in the working area so that they can identify which bulb lights
first easily. They then took a video of the activity in a normal speed and a slow motion. They then open
and close the circuit by disconnecting a wire at one of its ends. They do their best to determine if they
are able to notice a difference in lighting time for the bulb. They repeat the process for several of the
wires in an attempt to identify an answer to the question posed in the Purpose.
Electrical Circuits 1 (Laboratory) Activity 2
Diagram:
Data Section:
Mendoza: it is obvious that they will all light up at the same time using our naked eyes since light
speed is really fast. But when we use slow motion we noticed that there is this difference between the
bulbs. Bulbs near the Terminals always lights first.
Natividad: Base on my observation they just lit up at the same time using our naked eye, but i think if
you use a machine that can slow up to 100x or more we will see if who will light first the a or c bulb.
Which light within a simple electric circuit is the first to light? Is it the light
closest to the positive terminal? ... closest to the negative terminal? ... or do all
lights seem to light at the same time?
Conclusion:
We decided and combine all our observation and data gathered, We would say the bulb always
light at the same time, there is just small difference when the filament of the bulbs heat up faster it will
attract our eyes first. Although which exact bulb will be glowing first would not be seen by human eye.
The same current would be experienced by each. If not, then the relative ratings and mass of the
filaments would determine which got to which temperature first. We would probably need high speed
instrumentation to monitor it
Links:
https://drive.google.com/folderview?id=10ooy92ElAvZeJWEsdp7uN2pISCIRqz_H