This document provides parameters for a plastic molding machine including:
- Information about the molded part including the article name, material, supplier, weight, and number of cavities
- Machine settings including cycle time, temperature settings, pressure and flow settings, screw speed, positions and speeds for mold opening/closing and carriage movement, and timer settings for each step of the molding cycle.
This document provides parameters for a plastic molding machine including:
- Information about the molded part including the article name, material, supplier, weight, and number of cavities
- Machine settings including cycle time, temperature settings, pressure and flow settings, screw speed, positions and speeds for mold opening/closing and carriage movement, and timer settings for each step of the molding cycle.
This document provides parameters for a plastic molding machine including:
- Information about the molded part including the article name, material, supplier, weight, and number of cavities
- Machine settings including cycle time, temperature settings, pressure and flow settings, screw speed, positions and speeds for mold opening/closing and carriage movement, and timer settings for each step of the molding cycle.
This document provides parameters for a plastic molding machine including:
- Information about the molded part including the article name, material, supplier, weight, and number of cavities
- Machine settings including cycle time, temperature settings, pressure and flow settings, screw speed, positions and speeds for mold opening/closing and carriage movement, and timer settings for each step of the molding cycle.
Matière : PEHD Poids Net : 26 gr Fournisseur Mat : Nombre d'empreinte : 2 CODE: MP536201400 Temps de Cycle : 22 S Colorant : blanc 8000 Date : 12/01/2022 Moule N°: 138
TEMP TIMER COUNTER
Temperature Timer Setting 1 175 ACTUAL Setting 2 180 T0 Cycle Time 1,7 35 3 195 T1 Close Mold Delay 0 0,25 4 180 T2 Close Mold Camping 0 0,5 5 185 T3 Cutting Delay 0 2 6 185 T4 Cutting Time 0,08 1 7 185 T5 Carriage BWD 0 0 Oil Temp 21 T6 Blow Pin Down Delay 0,4 0,4 T7 Blow Pin Down Time 5 5 PRESSURE FLOW T8 BLOWING DELAY 0,9 0,9 Blow Pin PRE SPE T9 First blow time 15 15 T10 1 1 Blow Pin Up 30 30 T11 5 5 Blow Pin Down 27 27 T12 7 7 Blow Pin Micro-Draw 33 33 T13 0,4 0,4 Die-Head Up/Down 40 28 T14 0,1 0,1 T15 0 0,1 Screw Speed Set Run Set T16 8 8 T17 5 5 T18 1 1,5 MOLD T19 2 2 MOLD OPEN PRE SPE Pos T20 0,5 0,5 1 Fast ----> 100 100 T21 0,8 0,8 2 Slow -----> 40 60 170 T22 0,22 0,22 3 Stop -----> 270 T23 1,5 1,5 4 Mane R --> ** ** *** T24 2 2 MOLD CLOSED PRE SPE Pos T25 2,5 2,5 1 Fast ----> 40 40 T26 3 3 2 Slow -----> 25 30 100 T27 0 0 3 Stop -----> 170 T28 0 0 4 Clamp ----> 50 50 T29 0 0 T30 0 2,5 Carriage FWD PRE SPE Pos T31 9 9 1 Fast ----> 100 100 T32 2 2 2 Slow -----> 40 60 190 T33 0 3 3 End -----> 338 T34 0 0 T35 3 3 Carriage BWD PRE SPE Pos T36 0 0,2 1 Fast ----> 100 100 T37 0 4 2 Slow -----> 40 20 190 T38 4,5 4,5 3 END ------> 15 T39 6 6 T40 0 0 T41 0 0