Professional Documents
Culture Documents
ST805C PON Power Meter: User Manual
ST805C PON Power Meter: User Manual
ST805C PON Power Meter: User Manual
User Manual
V 1.1
CONTENTS
1. Summary ........................................................................2
2. Main Features .................................................................2
3. Function and Technical specification Function ..............3
4. Configuration ..................................................................6
5. Operation Instruction ......................................................8
5.1 ON/OFF .............................................................8
5.2 Relative value (differential loss) ........................8
5.3 Threshold setup .................................................9
5.4 Time setting .......................................................9
5.5 Auto power off..................................................10
5.6 Record browsing and management ................10
5.7 Battery under voltage ......................................10
6. Maintenance .................................................................10
1
ST805C PON Power Meter
1. Summary
PON Power Meter is specially designed for PON network
construction and maintenance which can be connected
between OLT and ONT. The voice, data, video signal
(1310nm/1490nm/1550nm) online can be measured
synchronously and optical power value can be displayed
with this meter. It has special burst mode measurement
function and you can process accurate burst optical power
measurement to upstream PON signal of 1310nm. You can
process pass/fail analysis conveniently through multiple
users’ adjustable threshold of every wavelength. It adopts
32 digits CPU with low power consumption, so the
functions are more powerful and rapid. More conveniently
measurement for field and equipment site owes to friendly
operation interface. It’s a useful site test tool for the
engineers of PON network and maintenance operators.
2. Main Features
Can test 3 wavelengths’ power of PON system
synchronously: 1490nm, 1550nm, 1310nm
Supply 3 groups of threshold values for operator’s
choice; analyze and display pass/fail status
Relative value(differential loss)
Can save and upload the records to computer
2
ST805C PON Power Meter
Can set the threshold value, upload data, and calibrate
wavelength through management software
32 digits CPU, easy to operate, simple and convenient
Auto power off, auto backlight off, low voltage power off
Function
Can test 3 wavelengths’ power of PON system
synchronously: 1490nm, 1550nm, 1310nm
Can test the burst mode signal of 1310nm
Threshold value setting function
Data storage function
Auto backlight off function
Display the voltage of battery, low voltage power off
Real-time clock display
Technical specifications
3
ST805C PON Power Meter
@1490nm(dB)
Isolation
>40 >40
@1550nm(dB)
Accuracy
Uncertainty(dB) ±0.5
Polarization
Dependent Loss <±0.25
(dB)
Linearity(dB) ±0.1
Through
Insertion <1.5
Loss(dB)
Resolution 0.01dB
Unit dBm/xW
4. Configuration
5
ST805C PON Power Meter
6
ST805C PON Power Meter
USB connector: Communicate with the management
software through USB connector.
Charge connector: Connect with adapter to charge the
meter.
5. Operation Instruction
5.1 ON/OFF
ON: Press "ON" key for about 3 seconds, meter will power
on, main menu will be displayed as figure 1. The meter is
on normal working mode, and then user can process
related measurement. (Note: Press key for 3 seconds is
long press, and press 1 second is short press, similar
hereinafter).
8
ST805C PON Power Meter
"►","◄", and then press "OK" to save or press "OFF" to
exit.
Exit automatically without operation in 10 seconds.
the indicator will be , meter will start alarm and power off,
please charge meter (about 4-6 hours) in time, charge
indicator turns from red to green, it means battery is full
charged.
9
ST805C PON Power Meter
6. Maintenance
1. Keep the sensor’s head face clean, make sure there’s
no dust, no contamination, don’t use unclean and
nonstandard adapters, don’t insert poor polished surface,
or else it will damage the sensor’s head face.
2. Change the adapter carefully, keep the spared adapters
with sealing tight to avoid of touching dirt.
3. Please cover the dust cap timely if meter is unused,
keep the head face clean, don’t expose the sensor in air
for long time, or inaccuracy of measurement will be
caused if sensor touches dirt.
4. Clean the sensor’s head face regularly.
10
ST805C PON Power Meter
Tel: 86-533-3589257
Fax: 86-533-3587522/3589257
Email: export@senter.com.cn
http://en.senter.com.cn/
11