Professional Documents
Culture Documents
3245419ha - Pedal Pos XDCR Pilot R - Bcu - WRG
3245419ha - Pedal Pos XDCR Pilot R - Bcu - WRG
3245419ha - Pedal Pos XDCR Pilot R - Bcu - WRG
08/12/19
Message Overview:
Fault Message:
Fault Code:
3245419HA
Associated CAS:
(WARNING)
(CAUTION)
(CAUTION)
(CAUTION)
BRAKE FAULT
(ADVISORY)
Fault Description:
www.learjet.com/fss/cic/Gx/global/global/troubleshooting/caims/32/3245419hafc/index.html 1/3
12/31/21, 9:50 AM 3245419HA - PEDAL POS XDCR PILOT R/BCU/WRG
Right Pilot Pedal Brake Position Transducer has been detected failed by the Brake Control Unit
(BCU).
Possible Causes:
Pilot Right Brake Pedal Transducer (MT58)
Brake Control Unit (BCU) (A71)
Associated Wiring
Troubleshooting Tips:
Advisory Wire/Service Bulletin:
If you replace a brake system component please fill out this questionnaire.
Quick Links:
Operational Test of the Brake System AMM 32-43-00-710-801 [ Global Express ] [ G5000 ] [ Global
XRS ]
Rigging of the Brake System AMM 32-43-00-820-801 [ Global Express ] [ G5000 ] [ Global
XRS ]
Removal of the Brake Control Unit AMM 32-43-01-000-801 [ Global Express ] [ G5000 ] [ Global
XRS ]
Installation of the Brake Control Unit AMM 32-43-01-400-801 [ Global Express ] [ G5000 ] [ Global
XRS ]
Removal of the Brake-Pedal Position AMM 32-43-05-000-801 [ Global Express ] [ G5000 ] [ Global
Transducer XRS ]
Installation of the Brake-Pedal Position AMM 32-43-05-400-801 [ Global Express ] [ G5000 ] [ Global
Transducer XRS ]
Access to System Diagnostics AMM 45-45-00-970-804 [ Global Express ] [ G5000 ] [ Global
XRS ]
Wire Repair - Maintenance Practices - ALL SPM 20-12-10-02 [ Global Express ] [ G5000 ] [ Global XRS ]
www.learjet.com/fss/cic/Gx/global/global/troubleshooting/caims/32/3245419hafc/index.html 2/3
12/31/21, 9:50 AM 3245419HA - PEDAL POS XDCR PILOT R/BCU/WRG
Troubleshooting Recommendations:
1. The Brake Pedal Position Transducer LVDT outputs can be monitored in CAIMS on the BRAKE
CONTROL SYSTEM DATA PAGE 2 to assist troubleshooting.
2. Examine pilot pedal brake position transducer for damage. Replace as required.
4. Perform wiring checks between pilot pedal brake position transducer (MT58P1) and BCU.
A. If wiring checks are not good, repair defective wiring as required and do close out.
B. If wiring checks are good, continue with next step.
7. Replace BCU.
8. Do close out.
www.learjet.com/fss/cic/Gx/global/global/troubleshooting/caims/32/3245419hafc/index.html 3/3