Professional Documents
Culture Documents
SSP 109S18 - 2020-10 - WR
SSP 109S18 - 2020-10 - WR
904.03 DEFINITIONS
Ethylene Vinyl Acetate (EVA) Foam means a closed-cell, flexible cellular foam product with a low density,
cross-linked copolymers, and containing ethylene vinyl acetate.
Section 904.04 of OPSS 904 is amended by the addition of the following clause:
A minimum of seven Days prior to installation, a product data sheet for the EVA foam to be used in the work
shall be submitted to the Contract Administrator. The data sheet shall clearly identify that the supplied EVA
foam meets the requirements of this specification.
904.05 MATERIALS
Section 904.05 of OPSS 904 is amended by the addition of the following subsection:
EVA foam shall have a compression-deflection range of 34 to 90 kPa when compressed by 25% of its original
thickness. The material does not require any specific resistance to the action of petroleum base oils.
Adhesive shall be commercial construction grade as recommended by the EVA foam manufacturer and shall
be compatible and appropriate for its intended use.
904.07 CONSTRUCTION
Section 904.07 of OPSS 904 is amended by the addition of the following subsection:
EVA foam shall be installed at locations specified on the Contract Drawings. EVA foam shall be uniformly
attached to all fixed concrete surfaces by means of an adhesive. Adhesive for EVA foam installation shall be
applied to concrete surfaces that are free of dust, dirt, debris, and loose concrete.
When EVA foam thickness specified in the Contract Drawings is greater than thickness commercially
available, multiple layers of EVA foam may be used to meet the specified thickness. Multiple layers of EVA
foam shall be fully bonded to each other using adhesive.
The minimum length of continuous EVA foam shall be the lesser of the element length or 1.2 m.