Professional Documents
Culture Documents
3D Printer Best Practices
3D Printer Best Practices
Common Issues
Issue What’s Happening Possible Solutions
First layer not adhering properly/ Plastic is not hot enough Increase chamber temperature
Curling at very beginning Or Increase extruder temperature
Filament is cooling too Add raft
quickly Decrease first layer print speed
Decrease filament cooling fan
speed (first layer)
Extruder oozing hot plastic Extruder is too hot Decrease extruder idle
temperature
Decrease extruder temperature
Layer separation or splitting Poor layer to layer Decrease layer height
adhesion Decrease filament cooling fan
speed
Stringy print Filament is leaking as Increase retraction distance
extruder moves Decrease extruder temperature
Increase extruder travel speed
Excessive bubbles form in PVA/ Filament has excess Replace with new PVA spool if
PVA extruder keeps jamming moisture that turns into a possible
gas bubble when heated Unload and dry out existing PVA
through extruder, spool
causing a jam
https://www.simplify3d.com/support/print-quality-troubleshooting/