Optional Parts of The Earthmoving

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 111

Optional parts of the earthmoving

Earthmoving.Overseas. Diego.Geng
Excavator Part

Page 2
ZOOMLION Excavator
Rubber Track

The steel tracks of various models can effectively protect the ground and
reduce noise after being equipped with rubber blocks.The number of
rubber blocks used is equal to the number of track shoes,which are fixed
by bolts.
Notice:Not the entire rubber track.Currently,our ZE60E-10 and
ZE75E-10 do not have a rubber track design. ZE55Gu and smaller
models will have rubber tracks as standard equipment.

Page 3
ZOOMLION Excavator
Cab guard net It is divided into
upper and lower
parts with this as
the center, which
need to be
selected at the
same time

The lower guard net is in the shape of a small grid, which is generally used to prevent small "flying objects" from the
ground from damaging the cab glass;
The front guard net and the lower front guard net of the cab are fence-type guard nets (select both), with strong
hardness and large mesh, which are used to prevent some larger objects from damaging the cab, and also protect the
driving member;
The top guard net is used to prevent threats from high altitude, such as falling objects such as rocks and trees;
Page 4
ZOOMLION Excavator
Short Stick

ZE360E Standard Stick,3187mm ZE360E Short Stick,2550mm

By changing the short stick configuration, a greater stick digging force can be obtained (leverage principle).
The above configuration is also applicable to ZE370E;
The standard stick length of ZE215E is 2925mm, and the optional short stick length is 2400mm.

Page 5
ZOOMLION Excavator
Bucket(Take the standard arm ZE360E as an example)

Model:Rock Bucket 1.6m³


Model:Large Bucket 1.72m³
Use:Heavy-duty operation, suitable
Use:Loading and excavating, suitable
for materials with a density ≤2000/m³
for materials with a density ≤1500/m³

Model:Standard Bucket 1.6m³ Model:Large Bucket 1.83m³


Use:Odinary excavating,suitable for Use:loading and excavating,
materials with a density ≤1800/m³ suitable for materials with a density
≤1200/m³

Page 6
ZOOMLION Excavator
Bucket(Take the standard arm ZE215E as a example)

Model:Standard Bucket 1.0m³ Model:Rock Bucket 0.9m³ Model:Large Bucket 1.1m³


Use:Odinary Bucket,suitable for Use:Heavy-duty Operation,suitable Use:Loading and Excavating,suitable
materials with density ≤1500/m³ for materials with density ≤2000/m³ for materials with density ≤1200/m³

Heavy-duty Operation:Digging or loading hard soil,stones,etc;


Odinary Excavating:Digging or loading sand, gravel, clay, etc;
Loading and Excavating:Digging or loading of dry, loose soil, sand, sludge, etc;
Page 7
ZOOMLION Excavator
Widened Track
The middle excavators track are generally a three-tooth
version of the track, generally available in widths of
600mm, 700mm and 800mm:
600mm wide track
Use:Used for stone ground, river bed, ordinary soil
Notice:On gravel and rocky ground, low-speed walking
800mm track 600mm track is required

700mm wide track


Use:For ordinary soil, soft ground
Notice:It cannot be used on gravel and rocky ground. It
can only be walked on flat ground. If it is unavoidable to
cross obstacles, slow down and walk at a low speed.

800mm wide track


Use:For soft ground
Notice:It cannot be used on gravel and rocky ground. It
can only be walked on flat ground. If it is unavoidable to
cross obstacles, slow down and walk at a low speed.

When choosing the width of the track shoe, choose the narrowest track shoe as much as possible according to the required
ground pressure. If the track shoe used is wider than needed, it will increase the load of the track shoe, causing the track shoe to
bend, the chain link is broken, the pin is broken, the track shoe bolt is loosened and various other problems.

Page 8
ZOOMLION Excavator
Turbo prefilter

ZE215E comes standard without turbo prefilter ZE215E optional turbo prefilter standard turbo prefilter for models over 37 tons

Air pre-filters are widely used in places with high dust concentration such as construction sites, mines, and deserts.
It has the following advantages:
1.Filter out more than 92% of dust and impurities in the intake air
2.After installation, the filter cleaning and replacement cycle is extended by 2-8 times
3.Reduce the early wear of the engine and prolong the service life of the generator
4.Reduce fuel consumption and improve engine efficiency
5.Automatic dust removal, no need to clean up
6.Simple installation, no daily maintenance

Page 9
ZOOMLION Excavator
Breaking hammer pipeline accumulator

Accumulator on ZE215E breaking hammer pipeline Accumulator on ZE360E breaking hammer pipeline

The accumulator installed on the breaker circuit can reduce the impact on the hydraulic system to a certain extent, thereby
protecting related components, such as pumps and radiators.

Page 10
ZOOMLION Excavator
Warning lamp and cameras

Walking and slewing warning light Rear view camera

Page 11
ZOOMLION Excavator
Fuel filling pump

Mid-excavator fuel filling pump

Page 12
ZOOMLION Excavator
ZE215E(ACE)Enlarged chassis

ZE215E adopts an
enlarged chassis, the gauge
is increased by 190mm,
and the wheelbase is
increased by 80mm.
The width of the whole
machine is increased to
2990mm, and the weight is
increased by 500kg.

ZE215E(ACE)Chassis ZE220E-10 Enlarged chassis

Page 13
ZOOMLION Excavator
Rubber track pad

破碎锤管路 Pipes of breaking hammer 003003461A0000000


Breaking hammer(without
ZE60E-10 破碎锤(不带管路) 1019901634
pipes)
橡胶履带板 Rubber track pad 1031400264

破碎锤管路 Pipes of breaking hammer 003015261A0000000


Breaking hammer(without
ZE75E-10 破碎锤(不带管路) 1019901635
pipes)
橡胶履带板 Rubber track pad 1031400505

Not only small excavators, all models can be


equipped with rubber track pad

Page 14
ZOOMLION Excavator
Pipes of Breaking hammer

At present, except for ZE135E-10, Zoomlion excavators can be


equipped with breaking hammer pipelines.

Page 15
ZOOMLION Excavator
Breaking hammer

The price of the breaking hammer on the price list is the price of a separate
breaking hammer, excluding the breaking hammer pipeline

Page 16
ZOOMLION Excavator
Cab guard net

Pipes of breaking
破碎锤管路 003011761A0000000
hammer
Breaking
破碎锤(不带管路) 1019901594 HB135
hammer(without pipes)
涡轮预滤 Turbine filter 1000100185
ZE215E 短斗杆(2.4m) Short arm 003011015B0000001
ZE215E ACE 驾驶室顶防护 Top guard net 003011030A0200000
驾驶室前防护 Front guard net 003011030A0400000 同时选择select
驾驶室前下防护网 Front lower guard net 003011030A0600000 both
下防护网 Lower guard net 003011030A0001010
宽履带 Track 800mm 1031400165 800mm

The lower guard net is standard on ZE245E, ZE370E


and above models

Lower guard net Top front and front lower guard net

Page 17
ZOOMLION Excavator
Bucket

21 tons standard 1.0m³ordinary bucket

The price behind the optional bucket is a premium, that is, the price difference between the optional
bucket and the standard bucket.

21 tons standard with 0.9m³rock bucket

Page 18
ZOOMLION Excavator
Track

破碎锤管路 Pipes of breaking hammer 003011661A0000000


Breaking hammer(without
破碎锤(不带管路) 1019901594
pipes)
1.1立方斗 1.1m³ largened bucket 003011816C0000000
报警灯 Warning lamp 1020404229
加油泵 Fuel filling pump 1010000716
ZE220E-10 短斗杆(2.4m) Short arm 003011015B0000001
驾驶室顶防护
ZE215E with 600mm track (standard)
Top guard net 003011030A0200000
驾驶室前防护 Front guard net 003011030A0400000
驾驶室前下防护网 Front lower guard net 003011030A0600000
下防护网 Lower guard net 003011030A0001010
800mm履带(山推) Track 800mm 1031400771

Excavators over 20 tons are generally equipped with 600mm track as


standard, and generally 700mm and 800mm are available. The price
on the price list is an increase (that is, the price difference)

ZE215E with 800mm track (optional)

Page 19
ZOOMLION Excavator
Long Reach Excavator

A large number of constrution machinery equipment are required for municipal


construction, subway traffic improvement, sewer reconstruction, river cleaning, etc.
However, standard excavating machinery cannot complete specialized engineering
operations, so at this time, the extended arm excavator uses ultra-long motion Arms and
super-long sticks are used to show their power, and they can be used in dredging, bank
protection, slopes, subway construction and other working conditions that are restricted
by the ground environment.
Page 20
ZOOMLION Excavator
Extended arm
--Lengthened type:Two-stage arm

The scope of use is relatively large, but its main function is to increase the
excavation radius, cleaning rivers, reclaiming land, excavating subway entrances
and exits, underground tunnels for pedestrians, repairing highway protective walls,
and conveying cement for general residences.Some people use his front breaking
hammer to act on house demolition, but it is more dangerous, so this operation is
not recommended. The two-stage extension boom is generally more modified in
the 10-26 meter range.
Page 21
ZOOMLION Excavator
Extended arm
--Lengthened type:Three-stage arm

Mainly used in the demolition of high-rise buildings, front breaking hammer or


hydraulic demolition shear. There are more users within 20-28 meters.

Page 22
ZOOMLION Excavator
Extended arm
--Lengthened type:Four-stage arm

Used for ultra-long-distance working conditions, this method is extremely rare in


the market.

Page 23
ZOOMLION Excavator
Extended arm
--Lengthened type:Sliding arm or inner telescopic arm

Mainly for the design of working conditions where the radius of gyration is small but the
digging depth is very demanding, the shell bucket (clamshell bucket) is usually placed in
front. The maximum vertical digging depth of the sliding boom is generally 10 meters, and
the vertical digging depth of the inner telescopic boom is generally within 26 meters.

Page 24
ZOOMLION Excavator
Extended arm
--Lengthened type:Pile driver extension arm

The big and small arms are straight, the front bending arm is about 2.6 meters (mainly for
connecting with the vibrating hammer to install the valve block and pipeline) and the vibrating
hammer,Used in the construction of roads,railways or pull out steel sheet piles when burying
pipelines.

Page 25
ZOOMLION Excavator
Extended arm
--Lengthened type:Lengthened arm of grabber

Designed for loading and unloading trains or cars, generally the boom is 7.6
meters, and the forearm is 5-6 meters. Front wood grabber, grabber or shell
bucket.
Page 26
ZOOMLION Excavator
Extended arm

The length of the extended arm of the excavator is directly related to the quality of the excavator
and the output pressure.When we select the extended arm of the excavator, we must determine
how long the extended arm of the excavator should be according to the operating environment,
operation requirements, quality of the excavator, and the capacity of the auxiliary equipment such
as the bucket;Two-stage excavator extended arms often involve three main parameters of digging
height, digging depth, and working radius in construction operations; while three-stage demolition
machine extended arms often involve three major parameters: lifting height, safe working height,
and operating radius.Only comprehensive factors can determine how long the excavator extended
arm can be equipped with.
Common three-stage extended arms:
Common two-stage extended arms:
21-ton excavator with 14-meter demolition and extended arm
21 ton excavator with 15m extended arm
24-ton excavator with 16-meter demolition and extended arm
24 ton excavator with 18m extended arm
33-ton excavator with 18-meter demolition and extended arm
33 ton excavator with 18m extended arm
37-ton excavator with 20-meter demolition and extended arm
37 ton excavator with 18-20m extended arm

Page 27
ZOOMLION Excavator
Pile Driver

The use of pile driver:Vibratory pile drivers are mainly installed on excavators. Excavators
include excavators on land and amphibious excavators. The types of piles include pipe piles,
steel sheet piles, steel pipe piles, precast concrete piles, wooden piles and photovoltaic piles
driven on water,etc.
It is especially suitable for short and medium pile projects such as municipal administration,
bridges, cofferdams, and building foundations. The noise is small and meets the city standards.
Page 28
ZOOMLION Excavator
Pile Driver Working principle of pile driver:
The vibratory pile driver uses its high-frequency
vibration to vibrate the pile body with high
acceleration, and transmits the vertical
vibration generated by the machine to the pile
body, which causes the soil structure around
the pile to change due to vibration and reduce
its strength.The soil around the pile body is
liquefied to reduce the frictional resistance
between the pile side and the soil body, and
then the pile is sunk into the soil by the
pressure of the excavator, the vibratory Pile
Hammer and the weight of the pile body.When
pulling out the pile, pull up the pile with the
lifting force of the excavator while one side is
vibrating. The excitation force required by the
pile driving machine should be determined
comprehensively according to the soil layer, soil
quality, water content of the site, and the type
and structure of the pile.

Page 29
ZOOMLION Excavator
Pile Driver
--Pile driving arm

Pile hammers can also be used without extending the arm. The 21 tons and 36 tons in the figure below can drive 6 meters
and 9 meters of piles respectively under the normal boom;
Under the standard arm, the height of pile driving can be increased by using the center base of the lower moving arm;

Page 30
ZOOMLION Excavator
Pile Driver
--Pile driving arm

13.8 meters extended arm, 12M piles. ZE370E modification

Page 31
ZOOMLION Excavator
Pile Driver
--Pile driving arm

16 meters extended arm, 15M piles. ZE490EK-10 modification

Page 32
ZOOMLION Excavator
Pile Driver
--Pile driving arm

19 meters extended arm, 18M piles. ZE490EK-10 modification

Page 33
ZOOMLION Excavator
Pile Driving
--Pile hammer

Zoomlion has a number of piling hammer suppliers, the above is the parameter information of different models of Yantai Juxiang piling hammers

Page 34
ZOOMLION Excavator
Pile Driver
--Pile hammer

中挖加油泵

Page 35
ZOOMLION Excavator
Pile Driver
--Pile hammer

Working form of different grippers

Page 36
ZOOMLION Excavator
Pile Driver

Various steel sheet piles and cement piles

Page 37
ZOOMLION Excavator
Hydraulic Impact Breaker

The purpose of hydraulic breakers for excavators: It uses high-frequency impact to break large and
hard brittle objects, such as construction concrete, large stones, concrete roads, etc.

Page 38
ZOOMLION Excavator
Hydraulic Impact Breaker

Working principle of breaker

Page 39
ZOOMLION Excavator
Hydraulic Impact Breaker

Breaker models corresponding to various models of Zoomlion excavators(Eddie)

Page 40
ZOOMLION Excavator
Hydraulic Impact Breaker

Parameter information of various types of breakers(Eddie)

Page 41
ZOOMLION Excavator
Amphibious Excavator
The conventional excavator is
modified by replacing the
chassis. It is used for muddy
swamps without pontoons on
both sides, while those with
pontoons can be completely
floated on the water and used
for diving operations.

Page 42
ZOOMLION Excavator
Hight-Foot Excavator

High-foot excavators are mainly used in


shoals and shallow sea areas for excavation,
underwater hoisting,transshipment of
materials on large vessels and other
operations.

Page 43
ZOOMLION Excavator
公铁两用挖掘机(Highway and Railway dual - use Excavators)

The road-rail dual-purpose


excavator is mainly used to
replace the sleepers on the
railway.

Page 44
ZOOMLION Excavator
Excavator with Rock Arm and Boom
Rock boom is a sharp tool for digging and
crushing weathered stone, shale, red
sandstone, etc. It has the advantages of
higher efficiency and lower loss than
traditional breaking hammer operations.
Compared with traditional blasting
operations, it has higher operating
efficiency, lower crushing costs, and
maintenance.
This configuration is used for models
over 36 tons

Page 45
ZOOMLION Excavator
Excavator with Elevating Cab

Like large-tonnage lifting equipment, the


cab can be raised to get a better view. It
is generally used for long-arm excavators.

Page 46
ZOOMLION Excavator
Excavator with Telescopic Arm

Also known as a pipe gallery excavator, it is


generally equipped with a clamshell bucket for
lifting underground materials. Generally, the
operating depth of a modified 36-ton excavator can
reach about 28 meters.

Page 47
ZOOMLION Excavator
Excavator with Material Handling Arm

The boom of the grab arm excavator is


designed as a long straight arm, the
stick is designed as a long curved arm,
and the stick cylinder is designed as a
double cylinder.
It is suitable for the working
environment of various materials
loading and unloading. According to the
type of loading and unloading materials,
orange peel bucket,clamshell bucket, or
fork grab can be selected.

Page 48
ZOOMLION Excavator
Hydraulic Orange Peel Grab

Suitable for grabbing gravel, scrap metal, industrial waste, construction


waste, domestic waste, etc.

Page 49
ZOOMLION Excavator
Clamshell Bucket

Clamshell buckets are used to excavate foundations in confined


spaces such as trenches and ditches, and to load mud, sand, coal,
and gravel. They are also used to load and unload the above-
mentioned materials on ships, trains, and automobiles.

Page 50
ZOOMLION Excavator
Grapple

Stone grapple Wood grapple

The stone grapple is used for the handling of scrap metal, stones, scrap
steel and other loading and unloading machines.
The wood grapple is used for loading, unloading and handling sugarcane,
cotton, wood, etc.

Page 51
ZOOMLION Excavator
Tilting Bucket

The tilting bucket is suitable for various excavator models of 4-30 tons, and the tilt
angle range is 0-45°. The tilting bucket can change the inclination angle of the
excavator bucket, and can work without changing the position of the excavator,
reducing mechanical wear and fuel consumption, and improving work efficiency.

Page 52
ZOOMLION Excavator
Ripper

The excavator ripper is used for crushing hard soil, gravel, sub-hard rock,
etc., which is convenient for bucket excavation and loading.
Generally single-tooth, but also two-tooth or three-tooth.

Page 53
ZOOMLION Excavator
Quick Hitch

Quick Hitch can quickly install various configuration parts (buckets,


breakers, hydraulic shears, etc.) on the excavator, expand the scope of
use of the excavator, save time and improve efficiency.

Page 54
ZOOMLION Excavator
Hydraulic Swing Demolition Sorting Grab

It is suitable for grabbing construction waste, industrial raw materials,


industrial waste, and larger hard soil stones.

Page 55
ZOOMLION Excavator
Hydraulic Crusher

Used for the secondary crushing of concrete and the separation of steel
and concrete.

Page 56
ZOOMLION Excavator
Vibrating Temper

It is used to complete flat compaction, slope compaction, step compaction, trench


compaction compaction and other complex foundation compaction treatments.

Page 57
ZOOMLION Excavator
Pile Breaking Machine

It is used to cut and remove cast-in-place piles, precast piles, etc. in


general foundation construction.

Page 58
ZOOMLION Excavator
Hydraulic demolition Shear

Hydraulic shears are generally divided


into scrap steel type and concrete type.
Scrap steel type is used for direct
shearing of steel, and concrete type is
generally used for one-time dismantling
of concrete structures.

Page 59
ZOOMLION Excavator
Hydraulic Eagle Shear

The excavator hydraulic eagle shear can be used for the dismantling of
heavy steel scrap, scrapped cars and ships, steel structures, etc.

Page 60
ZOOMLION Excavator
Hydraulic Auger Drilling Device

The hydraulic auger drilling device is used for digging pits,


guiding holes for solar pipe piles or driving spiral piles, etc.

Page 61
ZOOMLION Excavator
High Frequency Breaker
The high-frequency breaker can be used for
underwater crushing operations without
modification. It has significant advantages in
sandstone, weathered rock, partial limestone,
and rock working conditions of the Castell
landform structure.
The high-frequency breaker changes the
principle of piston impact crushing. Compared
with the breaker, it effectively avoids black oil
or metal debris from damage to the hydraulic
system of the excavator,and through a
reasonable mechanical structure, the damage
to the boom and stick of the excavator
caused by the hammer is effectively avoided.

Page 62
ZOOMLION Excavator
Jaw Crushing Bucket

It is suitable for urban demolition


garbage (bricks, concrete, stones and
other aggregates) treatment, waste
utilization, energy saving and
environmental protection.
It is suitable for small-scale
construction sites, stone factories and
other construction requirements.

Page 63
ZOOMLION Excavator
Drum Cutter

The Drum Cutter efficiently replaces general


configurations such as buckets, breakers, hydraulic
shears, etc., and is used in open-pit coal mines,
tunnel boring and contour correction, channel
trench milling, asphalt concrete pavement milling,
rock frozen soil milling, tree root milling, etc. ,
The milling machine provides a new construction
method for tunnel excavation.

Page 64
ZOOMLION Excavator
Hydraulic Screening Bucket

The excavator hydraulic screening bucket


is used to classify and screen mixed
garbage, wood chips, and construction
residues by size.

Page 65
ZOOMLION Excavator
Vacuum Lifting Device

There is a suction cup inside, and the


pipe is lifted by the vacuum principle.
Compared with the wire rope lifting, it
has a good protective effect on the
pipe insulation. Generally used for
pipelines below 15 tons. It is more
flexible and efficient than the pipelayer.

pipelayer

Page 66
ZOOMLION Excavator
Hydraulic Mixing Bucket

Portable movable concrete mixing device

Page 67
ZOOMLION Excavator
Rock Drill
The rock drill is a tool used to
directly mine stone. It drills
blastholes in the rock formations so
that explosives can be put in to
blast the rocks, thereby completing
stone mining or other stonework
projects. In addition, the rock drill
can also be used as a breaker to
break hard layers such as concrete.

Page 68
ZOOMLION Excavator
Coil Steel Rod Handler

Coiled loader is a large handling machinery and


equipment, easy to use, simple, high efficiency,
suitable for large steel coils, round plate of trucks,
loading and unloading ships, yard heap palletizing.

Page 69
ZOOMLION Excavator
Heavy Duty Hydraulic Breaker

Heavy duty hydraulic breaker, also known as open


mountain hammer, is an impact breaker, mainly
used in mining, quarrying, steel, demolition and
other industries

Page 70
Bulldozer Part

Page 71
ZOOMLION Bulldozer
Six-post anti-turning frame

Used for the protection of the cab and personnel in the forest environment

Page 72
ZOOMLION Bulldozer
Four-post anti-turning frame

Used to protect the driver and the operator when


there is a falling object or the overturning of the
thruster

Page 73
ZOOMLION Bulldozer
Straight tipping blade

Mainly composed of blade, push frame, lifting hydraulic cylinder, tilting hydraulic cylinder and other components, it can realize
the lifting and tilting action of the blade. It is widely used in roads, airports, open-pit coal mines, water conservancy, power
plants and other construction environments.It is the most widely used blade.

Page 74
ZOOMLION Bulldozer
Small half U blade

The two ends of the blade extend forward into a small U-shape, and the material will not be lost from both ends during the
bulldozing. Therefore, the capacity of the blade is larger than that of a straight tilting blade, and the work efficiency is higher.
The small half U shovel of the ZD160 series is being trial-produced and cannot be selected yet.

Page 75
ZOOMLION Bulldozer
Angle blade

The corner blade can be tilted at a 25° angle in the horizontal direction, and the material can be divided to the left
or right side when working, for the working environment of lateral soil removal

Page 76
ZOOMLION Bulldozer
U-shaped blade

Like the coal blade, the two ends of the blade extend forward into a large U shape, so that the material will not be lost from both ends
during the bulldozing. The blade has large capacity and high work efficiency. It is specially used to push loose materials such as coal
and sand.

Page 77
ZOOMLION Bulldozer
Universal blade

It is mainly composed of blades, arches, lifting hydraulic cylinders, rotary hydraulic cylinders, roll hydraulic cylinders and other
components. The bulldozing and earth moving operations in the six directions of lifting, turning, and roll are all realized by the
expansion and contraction of hydraulic cylinders;
It is mainly used for the construction and maintenance of complex terrain such as golf courses, amusement parks, and forest
areas. It can also be used for environmental treatment and river embankment repair and maintenance engineering operations.

Page 78
ZOOMLION Bulldozer
Heightening blade

The upper part of the blade is heightened, the blade capacity is large, and the protection is good,
suitable for the construction environment such as the jungle.

Page 79
ZOOMLION Bulldozer
Sanitation blade

The blade has a large capacity and a fence on the upper part, which is mainly used for flattening, landfilling, and compaction of
domestic garbage in the landfill.
Among them, the dry-land pusher is equipped with a dry-land sanitation blade, and the wetland model is equipped with a wet-
land sanitation blade.

Page 80
ZOOMLION Bulldozer
Wasteland blade

The blade body is changed from a solid type to a through-core type, which is used for reclaiming wasteland, shrubland, etc.

Page 81
ZOOMLION Bulldozer
Desert water tank

Used in high temperature desert environment above 47℃

Page 82
ZOOMLION Bulldozer
Large clearance water tank

Used in dusty and powdery environment, easy to wash

Page 83
ZOOMLION Bulldozer
Heavy Desert Water Tank

The heavy-duty large-capacity water tank is used in sand and dust environments. There is a protective net
inside to prevent damage to the water tank caused by the sand and dust caused by the fan blade

Page 84
ZOOMLION Bulldozer
Double front air grille

When used in a forest environment, prevent small branches from being inserted into the front air grille to avoid
damage to the water tank

Page 85
ZOOMLION Bulldozer
Three-tooth ripper

Used for large-area excavation of frozen soil, hard pavement, etc., can
loosen 3-4 level soil

Page 86
ZOOMLION Bulldozer
Single tooth ripper

It can be used for large-area excavation of frozen soil, hard roads, mine stripping construction and farmland
infrastructure, instead of traditional drilling and blasting construction, and the operation and construction are
safe.

Page 87
ZOOMLION Bulldozer
Mechanical winch

Rear-mounted mechanical winch, with large traction, has the function of automatic rope laying, towing and
dragging, and has self-rescue and mutual rescue functions when working in dangerous areas.It is mainly used to
tow or lead equipment, logging in forest areas, and other equipment.

Page 88
ZOOMLION Bulldozer
Fuel heater

Used for preheating the engine and cab before working in cold areas

Page 89
ZOOMLION Bulldozer
Desert filter (pre-filter)

Used in sand and dust environment, ZD160 series are standard, other models are optional

Page 90
ZOOMLION Bulldozer
Air conditioner/heater

All models of air conditioner and heater are optional. The heater can only heat, while
the air conditioner can cool and heat.

Page 91
ZOOMLION Bulldozer
Centralized lubrication device

All series are available for automatic maintenance of lubrication points

Page 92
ZOOMLION Bulldozer
Reinforced traction frame

The reinforced towing frame can be used to tow some heavy equipment or materials

Page 93
ZOOMLION Bulldozer
Mudguard

The support wheel mudguards are divided into long type and short type:

Dry soil type long mudguard for conventional soil environment


Dry ground type short mudguard for clay environment
Wetland type long mudguard is used in conventional wetland
environment
Wetland type short mudguards are used to open fish ponds, fill lakes and
other muddy environments

Page 94
ZOOMLION Bulldozer
Warning device

There are two types of warning devices, one is always flashing after turning on the switch (1020404514), and the other is
equipped with a reversing sensor to give an audible alarm (1020404230) when the machine is moving backwards.

Page 95
ZOOMLION Bulldozer
ZD160 extended trolley frame

ZD160 comes standard with 6-support wheeled trolley ZD160 optional 7-support wheeled frame
frame

Universal shovel, forest logging type use, extended trolley, low ground pressure, good passability

Page 96
ZOOMLION Bulldozer
ZD160 series track

The 1100mm Shantui wetland track is divided into ribbed and unreinforced. The ribbed type helps reduce the
resistance when turning.

Page 97
ZOOMLION Bulldozer
ZD220 series track

The thickness of ordinary track steel plate is 14.3mm, while the thickness of 560mm rock type track is 17mm

Page 98
ZOOMLION Bulldozer
ZD320 series track

The thickness of ordinary track steel plate is 14.3mm, while the thickness of 560mm rock type track is 17mm

Page 99
ZOOMLION Bulldozer
Four-post anti-turning frame
四柱防翻滚架 ROPS&FOPS 004904097A0000000

六柱防翻架 ROPS&FOPS 004904097B0000000

液压式绞盘 Hydraulic winch 004904081A0000001

三齿松土器(含管路) Three-tooth ripper(with pipes) 004904078A0000000

三齿松土器油路管路 Pipes of three-tooth ripper 004904087A0000001

环卫铲 Sanitation blade 004904071D0000000

角铲 angle blade 004904071B0000000


ZD160 series
箱体式暖风机 Heater(warm air blower) 004904092A0000000

Centralized lubrication, track


集中润滑、履带自动涨紧装置 004904086A0000000
automatic tension device

燃油加热器(进口) Fuel heater (imported device) 004904091A0000000

ZD160-3万向铲 ZD160-3 universal blade 004904071H0000000

山推履带 Track (Shantui) 004904032A0000000

潍坊沙漠水箱 Desert tank 1200200018

7支重轮下车架 track frame with 7 track rollers 004904230A0200000

All models can be equipped with four-post anti-turning frame

Page 100
ZOOMLION Bulldozer
Six-post anti-turning frame
四柱防翻滚架 ROPS&FOPS 004904097A0000000

六柱防翻架 ROPS&FOPS 004904097B0000000

液压式绞盘 Hydraulic winch 004904081A0000001

三齿松土器(含管路) Three-tooth ripper(with pipes) 004904078A0000000

三齿松土器油路管路 Pipes of three-tooth ripper 004904087A0000001

环卫铲 Sanitation blade 004904071D0000000

角铲 angle blade 004904071B0000000


ZD160 series
箱体式暖风机 Heater(warm air blower) 004904092A0000000
Centralized lubrication, track
集中润滑、履带自动涨紧装置 004904086A0000000
automatic tension device

燃油加热器(进口) Fuel heater (imported device) 004904091A0000000

ZD160-3万向铲 ZD160-3 universal blade 004904071H0000000

山推履带 Track (Shantui) 004904032A0000000

潍坊沙漠水箱 Desert tank 1200200018

7支重轮下车架 track frame with 7 track rollers 004904230A0200000

All models can be equipped with a six-post anti-turning frame. If the device is optional,
the closed cab is not required.

Page 101
ZOOMLION Bulldozer
Ripper

四柱防翻滚架 ROPS&FOPS 004904097A0000000

六柱防翻架 ROPS&FOPS 004904097B0000000

液压式绞盘 Hydraulic winch 004904081A0000001


Three-tooth ripper(with pipes
三齿松土器(含管路) 004904078A0000000

三齿松土器油路管路 Pipes of three-tooth ripper 004904087A0000001

环卫铲 Sanitation blade 004904071D0000000

角铲 angle blade 004904071B0000000


ZD160 series
箱体式暖风机 Heater(warm air blower) 004904092A0000000
Centralized lubrication, track
集中润滑、履带自动涨紧装置 004904086A0000000
automatic tension device

燃油加热器(进口) Fuel heater (imported device) 004904091A0000000

ZD160-3万向铲 ZD160-3 universal blade 004904071H0000000

山推履带 Track (Shantui) 004904032A0000000

潍坊沙漠水箱 Desert tank 1200200018

7支重轮下车架 track frame with 7 track rollers 004904230A0200000

ZD160 has only three-tooth rippers available in the industry;


ZD220 and ZD320 have single-tooth and three-tooth rippers
available;
Different from the pipe of the excavator breaker, in order to
facilitate the operation, the price of the ripper includes the pipe,
just choose the ripper.

Page 102
ZOOMLION Bulldozer
7 support wheels and extended chassis

Model 常规可选配置 Optional configuration Material code

四柱防翻滚架 ROPS&FOPS 004904097A0000000

六柱防翻架 ROPS&FOPS 004904097B0000000

液压式绞盘 Hydraulic winch 004904081A0000001

三齿松土器(含管路) Three-tooth ripper(with pipes) 004904078A0000000

三齿松土器油路管路 Pipes of three-tooth ripper 004904087A0000001

环卫铲 Sanitation blade 004904071D0000000

角铲 angle blade 004904071B0000000


ZD160 series
箱体式暖风机 Heater(warm air blower) 004904092A0000000

Centralized lubrication, track


集中润滑、履带自动涨紧装置 004904086A0000000
automatic tension device

燃油加热器(进口) Fuel heater (imported device) 004904091A0000000

ZD160-3万向铲 ZD160-3 universal blade 004904071H0000000

山推履带 Track (Shantui) 004904032A0000000

潍坊沙漠水箱 Desert tank 1200200018

7支重轮下车架 track frame with 7 track rollers 004904230A0200000

The ZD160 dry ground type has 6 support wheels and can be equipped
with an extended chassis, that is, a lower frame with 7 support weights
on one side to increase the contact area and is suitable for soft ground
conditions.

Page 103
ZOOMLION Bulldozer
Winch
四柱防翻滚架 ROPS&FOPS 004903097A0000000
六柱防翻架 ROPS&FOPS 004903097B0000000
机械绞盘(国产) mechanical winch 004903032D0000000
加长牵引钩 Lenthened traction device 004903069B0000000
空调 AC 004903094A0000000
涡轮预滤系统 Turbine pre-filtration system 1010500212
箱体式暖风机 Heater(warm air blower) 004903092A0000000

ZD220 series Centralized lubrication, track


集中润滑、履带自动涨紧装置 004903086A0000001
automatic tension device
燃油加热器(进口) Fuel heater (imported device) 004903091B0000000
加宽履带(610mm,干地) Track(610mm,conventional) 004903032C0000000
加宽履带(660mm,干地) Track(660mm,conventional) 004903032D0000000
Guardrail welded on straight tilt
带护栏直倾铲(仅铲刀焊合件) 004903071R0200000
blade
沙漠水箱 Desert water tank 1000300570
Double layer reinforced
双层加强通风板 004903054R0000000
ventilation plate

ZD160T and ZD220 can be equipped with mechanical winches;


The ZD160 in the lower right picture is equipped with a hydraulic
winch. At present, this model still has some unresolved problems
and is expensive. Therefore, it is recommended to recommend the
mechanical ZD160T+ mechanical winch for the 160 horsepower
level optional winch;

Page 104
ZOOMLION Bulldozer
Widened Track

Like the excavator, the price of the widened track on the price list
refers to the price difference;

Page 105
ZOOMLION Bulldozer
Mobile equipment machine

The Mobile equipment machine is used to move the belt


conveyor

Page 106
ZOOMLION Bulldozer
Buried line equipment

Bulldozer wire burying equipment is


generally used to automatically bury
wires in softer soil.

Page 107
ZOOMLION Bulldozer
Track loader

The ZY65C track loader is specially developed for


metallurgy, mining and other industries. It is a
special equipment for removing slag in front of
the furnace and loading mine ore in iron and steel
enterprises.

Page 108
ZOOMLION Earthmoving
Track shoe

single grouser shoes double grouser shoes tripple grouser shoes

Page 109
ZOOMLION Earthmoving
Hydraulic oil selection

The use temperature is not lower than -19℃

Operating temperature range -40~45℃

Page 110
Keep moving!

You might also like