3
N ptained by insolubilizing the di
IN isobtained By ng the dissolved
a eis oe tion. Where obtained by the addiice:
gyn HH to amine ai the reduc terme
er
G08 eh re obtained by the destabilization of a solution
te
Jactis termed precipitated silica, After
ere obNych manner as to yield very fine
i Prtor NLT 1h, it Contains NLT 99.0% of so,
pn sca
Fale the Sample to platinum crucible, mi
f
anhydrous potassium carbonate, ignite at a
ih 2007189 Horner for 10 min, and cool Disolve the
oi of recently distilled Water, warming if
tin? Md slowly add 2 mL of ammonium
TS,
feria: A deep yellow color is produced,
ry
‘root
Saunt the Somplein a tared platinum dish at 1000"
ahi (Bina desiccator, and weigh. Carefully wet with
teint add 10 mL of hydrofluoric acid in small
valet is, Evaporate on a steam bath to dryness, and.
‘ool, Add 10 mL of hydrofluoric acid and 0.5 mL of sulfuric
Stand evaporate to dryness. Slowly increase the
‘Sepeture untill ofthe acids have been volatized, and
‘gi at 1000", Cool in a desiccator, and weigh. The
Berence between the final weight and the weight of the
‘aly ignited portion represents the weight of SiO.
teria: NLT 99.0% on the previously ignited
wweunries
‘honcanic IMPURITIES
_isntantion (733
leg
‘afi gre the Sample, previously died and weighed, at
Th,
‘eeplance criteria: it loses NMT 8.59% of its weight
Pride and Sulfate, Chloride 221): Boil § gin $0 mt of
‘under reflux condenser for 2h, cool, and fier. A
‘cporton ofthe filtrate shows no more chloride than,
Chet 121.0 mL of 0.020 N hydrochloric acid (0.1%).
rag and Sulfate, Sulfate (221): A 10-mL portion of the
coe" the test for Chloride shows no more sulfate than
safe t 5.0 ml. of 0,020 N sulfuric acid (0.5%)
Single efhod (211)
diggin: Transfer 4.0 g to a platinum dish. Add 5 mt
Sha geal and 35 mL of hydrofluoric acid, and evaporate
aygfa bath, Cool, Add $ mL. of perchloric acid, 10 mL
orate Ct acid, and 10 mL of sulfuric acid, and
{ea 0 @ hot plate to the production of heavy fumes,
fvnt gg@tsly transfer toa 10G-ml beaker with the aid O19
42430 ydrochiovie acid, and evaporate to dryness, COO!
hydrochloric acid, aliute with water to 40 ™e
Offi
al Monographs / Siicon 6009
and heat t
VOLUN dissolve any
Analyst Benard dhe Goo) Transfer toa 100-m
cept Sm eth water to volume
(NMS ppt: Metts the req ea tion.
secre ofthe test
SPH (791): 4 3
“Los on pf Bina sary
ren SY in 20)
NMT 5.096 Tag oY 8 Ome a 143"for 4h
ADDITIONA\
. iL REQUI
Packacna REMENTS
Protected jn? STORAGE: Preserve in tight containers,
+ tneanes (22, moisture, a
Precipitated st
Li is
i 0 state whether itis sca gel or
Colloidal Silicon Dioxide
SiO,
Silica (7631-86.9),
DEFINITION
‘olloidal Silicon Dioxide isa submicroscopic
roscopic fumed si
Brepared by the vapor-phase hydrolysis ofa sicon
compound. When ignite ,
99.0% and NMI 100801 Oy 2 contains NIT
IDENTIFICATION
‘A: ProceouRe
inalysis: Transfer S mg toa pltiaum crucible, and mix with
200 mg of anhydrous potassium carbonate. Heat the
‘tucible toa red color with the aid of a Bunsen burner for
10 min, and cool. Dissolve the melt in 2 mL of freshly
distilled water, watming if necessary, and slowly add 2 mL
‘of ammonium molybdate TS to the solution.
Acceptance criteria: A deep yellow color is produced.
+B. PRoceDuRE
[Note—-Avoid contact with o-olidine when performing,
this test, and conduct the test in a
wellventilated hood}
‘Analysis: Pace 1 drop ofthe yellow silicomolybdate solution
from Identification test A ona filter paper, and evaporate
the solvent. Add 1 drop of a saturated solution of o-tolidine
in glacial acetic acid to reduce the slicomolybdate to
molybdenum blue, and place the paper over ammonium
hydroxide,
Acceptance criter
ASSAY
* Procenune
m
ite the Sample in a tared platinum crucible at
or 2h, col na descator and weigh, Aad 3
sulfuric acid, and add enough alcohol to just
drops of uta complete. Add 13 mcf hydrofluoric
magsten fhe Sel-ventlated hood evaporate on a hotplate
Bd, an a eumnet 05-105) 3 aig ce
to resample doesnot spatter as dryness s approached.
Heat the crucible to lee co tne pa re |
the crc residue at 1000 # 25° for 30 min, coo
Pinel ee am eae
alysis car ing with “Add 15 ml. of hydrofluoric aid”,
Arh Be easy spec, prev ned
The woes, represents the weight of SO, nthe portion
sia; 99.09%-100.596 0n the previously
60.08
‘A greenish blue spot is produced.
1000+
taken.
Acceptance crite
ignited basis
aunushy CamScanner
Ea
=
s
Fy
A
co
PS
a