Professional Documents
Culture Documents
NEU CLAY 84A TDS - Eng
NEU CLAY 84A TDS - Eng
NEU CLAY 84 A
Clay Control
General
Product Specification
NEU CLAY 84 A is designed to replace KCl in
formation treatments and workovers. It is a
highly efficient tempo stabilizer for smectite, Appearance Liquid
illite and mixed layer clay minerals encountered
in many reservoirs. Odour Characteristic
Usage
Handling / Storage
NEU CLAY 84 A should be used at 0.3 to 1.0
percent where 2% KCl has been employed. Keep container tightly sealed to prevent
Usage rate can be increased or decreased evaporation, contamination, and explosion
depending on the clay type and content of the hazards. Use only with adequate ventilation.
specific zone in question. It can cause eye, skin and respiratory tract
irritation by contact. Recommend use of
NEU CLAY 84 A can be used up to 200 oC chemical splash goggles and rubber gloves
without any loss of efficiency. during handling.
Recommendations given in this bulletin are based on tests believed to be reliable. However, the use of the product is beyond the control of Neuchemie and no
guarantee, expressed or implied, is made as to the effects of such or the results to be obtained if not used in accordance with directions or established safe
practice. The buyer must assume all responsibility, including injury or damage, resulting from misuse of the product as such, or in combination with other
materials. This bulletin is not to be taken as a license to operate under or recommendation to infringe any patent.
NEU KIMYA A.Ş. Aydınlı Mah. İstanbul Deri OSB Kumpas Cad. No: 24 Ö1-1 Özel Parsel Tuzla/İstanbul Phone +90 216 466 16 38 info@neuchemie.com